LG Exalt 2 User Guide

							  69
your mobile phone number is 
not set.
8.6.1 Edit Codes
Allows you to enter a new four-digit 
lock code.
1.  Open the flip and press 
 
[MENU] . 
2. Press 
  Settings & Tools .
3. Press 
  Phone Settings.
4. Press 
  Security .
5.  Enter the four-digit lock code.
6. Press 
  Edit Codes .
7. Select  Phone Only  or Calls & 
Services . 
8.  Enter your new four-digit lock  code.
9.  For confirmation, it will ask you  to enter the new lock code 
again.
8.6.2 Restrictions 
Allows you to set separate 
restrictions for Location Setting, 
Calls and Messages.
1.  Open the flip and press 
 
[MENU] . 
2. Press 
  Settings & Tools .
3. Press 
  Phone Settings.
4. Press 
  Security . 5.  Enter the four-digit lock code.
6. Press 
 
Restrictions .
7.  Enter the four-digit service  code.
8.  Select a Restrictions menu then  press 
.
Location Setting/ Calls/ 
Messages
9.  Use the Navigation Key 
 to 
highlight the restriction then 
press 
. 
Location Setting  Lock Setting/ 
Unlock Se

tting
Calls: Incoming Calls  Allow All/ 
Cont

acts Only/ Block All
Calls: Outgoing Calls  Allow All/ 
Cont

acts Only/ Block All
Messages: Incoming Messages   
Allo

w All/ Block All
Messages: Outgoing Messages   
Allo

w All/ Block All
8.6.3 Phone Lock Setting
Keeps your phone from 
unauthorized use. Once the phone 
is locked, it's in restricted mode 
until the lock code is entered. You 
can still receive phone calls and 
make emergency calls. You can 
modify the lock code using Edit 
Codes submenu within the Security 
menu. 
						

							Settings & Tools
70   
1.  Open the flip and press  
[MENU] . 
2. Press 
  Settings & Tools .
3. Press 
  Phone Settings.
4. Press 
  Security .
5.  Enter the four-digit lock code.
6. Press 
  Phone Lock Setting .
7.  Highlight an option and press 
  [SET] .
Unlocked  The phone remains 
unlock

ed, by default.
On Power Up  The phone is 
lock

ed when it is turned on.
8.6.4 Lock Phone Now
This setting allows you to lock the 
phone immediately.
1.  Open the flip and press 
 
[MENU] . 
2. Press 
  Settings & Tools .
3. Press 
  Phone Settings.
4. Press 
  Security .
5.  Enter the four-digit lock code.
6. Press 
  Lock Phone Now .
NOTE To unlock the phone from standby 
mode, pr ess the Right Soft Key  
Unlock  and enter the four-digit lock code. 
8.6.5 Reset Default  
Allows you to reset your phone to 
the factory default settings. 1.  Open the flip and press 
 
[MENU] . 
2. Press 
  Settings & Tools .
3. Press 
  Phone Settings.
4. Press 
  Security .
5.  Enter the four-digit lock code.
6. Press 
  Reset Default .
7. Press 
 after reading the 
warning message.
8. Highlight  Revert and press 
.
A confirmation message is 
displayed briefly before the 
phone resets itself.
8.6.6 Restore Phone
Allows you to erase all user data 
and Contact information you've 
entered in the phone's memory so 
it's as if it just left the factory.
1.  Open the flip and press 
 
[MENU] . 
2. Press 
  Settings & Tools .
3. Press 
  Phone Settings.
4. Press 
  Security .
5.  Enter the four-digit lock code.
6. Press 
  Restore Phone .
7. Press 
 after reading the 
warning message.
8.  Enter the four-digit lock code. 
						

							  71
8.7 System Select
Allows you to set up the phone 
management environment. Leave 
this setting as the default unless 
you want to alter system selection 
as instructed by your service 
provider.
1.  Open the flip and press 
 
[MENU] . 
2. Press 
  Settings & Tools .
3. Press 
  Phone Settings.
4. Press 
  System Select .
5.  Use the Navigation Key 
 to  
highlight a setting, then press  
[SET] .
Home Only/ Automatic.
8.8 NAM Select
Allows you to select the phone’s 
NAM (Number Assignment 
Module) if the phone is registered 
with multiple service providers.
1.  Open the flip and press 
 
[MENU] . 
2. Press 
  Settings & Tools .
3. Press 
  Phone Settings.
4. Press 
  NAM Select .
5.  Use the Navigation Key 
 to  
highlight a setting, then press  
[SET] . NAM1/ NAM2
8.9 Data Roaming Access
Allows you to use data connections 
when you are roaming.
1.  Open the flip and press 
 
[MENU] .
2. Press 
  Settings & Tools .
3. Press 
  Phone Settings.
4. Press 
  Data Roaming Access .
5.  Use the Navigation Key 
 to 
highlight a setting, then press 
  [SET] . 
Deny data roaming access /  
Allow access only for this trip / 
Allow access for all trips
9. Call Settings
The Call Settings menu allows 
you to designate how the phone 
handles both incoming and 
outgoing calls.
9.1 Answer Options
Allows you to determine how the 
phone will answer an incoming call.
1.  Open the flip and press 
 
[MENU] . 
2. Press 
  Settings & Tools .
3. Press 
  Call Settings .  
						

							Settings & Tools
72   
4. Press  Answer Options .
5.  Use the Navigation Key 
 to 
to select the setting(s) you 
want to use, then press 
 
[MARK] .
Flip Open/ Any Key/ Auto with 
Handsfree
6.  Press the Left Soft Key 
 
[Done]  when you have marked 
the setting(s) you want.
NOTE Auto with Handsfree is available 
when an y external device is connected to 
your phone or speaker is set to on. 
9.2 Call Forwarding
Allows an incoming call to be 
redirected to a mobile telephone 
or other telephone number.
1.  Open the flip and press 
 
[MENU] .
2. Press 
  Settings & Tools .
3. Press 
  Call Settings . 
4. Press 
  Call Forwarding .
5.  Use the Navigation Key 
 to 
highlight either Forward Call  
or Cancel Forwarding , then 
press 
.
6.  After selecting Forward Call,  enter the number to forward 
to and press 
. To cancel 
forwarding, select Cancel .
9.3 Auto Retry
Allows you to set the length of 
time the phone waits before 
automatically redialing a number 
when the attempted call fails.
1.  Open the flip and press 
 
[MENU] . 
2. Press 
  Settings & Tools .
3. Press 
  Call Settings . 
4. Press 
  Auto Retry .
5.  Use the Navigation Key 
 to 
highlight a setting, then press 
[SET] .
Off/ Every 10 Seconds/ 
Every 30 Seconds/ Every 60 
Seconds
9.4 TTY Mode
Allows you to attach a TTY device 
enabling you to communicate with 
parties also using a TTY device. A 
phone with TTY support is able to 
translate typed characters to voice. 
Voice can also be translated into 
characters and then displayed on 
the TTY.
1.  Open the flip and press 
 
[MENU] . 
2. Press 
  Settings & Tools .
3. Press 
  Call Settings . 
4. Press 
  TTY Mode . 
						

							  73
5.  An explanation message is displayed.
6. Press 
 to continue.
7.  Use the Navigation Key 
 to 
highlight a setting, then press 
[SET] .
TTY Full: Users who cannot 
t

alk or hear send and receive 
a text message through TTY 
equipment.
TTY + Talk: Users who can talk 
but canno

t hear receive a text 
message and send voice through 
TTY equipment.
TTY + Hear: Users who can 
hear but canno
 t talk send a 
text message and receive voice 
through TTY equipment.
TTY Off: Users send and receive 
without TTY equipment. C

onnecting TTY Equipment and 
a Terminal
1.  Connect a TTY cable to TTY 
connection on the terminal 
(TTY connection location is the 
same as a headset jack). 
2.  Enter the phone menu and set  the desired TTY mode.
3.  After setting a TTY mode, check  the LCD screen of the phone 
for the TTY icon.
4.  Connect the TTY equipment to  the power source and turn it on.
5.  Make a phone connection to  the desired number.
6.  When connection is made, use  the TTY equipment to type 
in and send a text message or 
send voice.
Menu User Menu Transmission/ 
Receiving Mode When making 
communications with a  non-TTY terminal  
TTY Full For hearing-/ 
verbally- 
impaired Text message 
transmission, text 
message receiving Operator 
required
TTY +  Talk For hearing-
impaired Able to talk Voice transmission, 
text message receiving  Operator required
TTY +  Hear For verbally-
impaired Audible Text message 
transmission, voice  receiving Operator required
TTY Off Voice transmission, 
voice receiving
TTY Mode (Tele Type writer) 
						

							Settings & Tools
74   
7.  The voice or text message from the receiver end displays on the 
TTY equipment display.
9.5 One Touch Dial 
Allows you to initiate a speed 
dial call by pressing and holding 
the speed dial digit. If set to Off, 
Speed Dial numbers designated in 
your Contacts will not function.
1.  Open the flip and press 
 
[MENU] . 
2. Press 
  Settings & Tools .
3. Press 
  Call Settings . 
4. Press 
  One Touch Dial .
5.  Use the Navigation Key 
 to 
highlight a setting, then press 
[SET] .
On/ Off
9.6 Voice Privacy
Allows you to set the voice privacy 
feature for CDMA calls. CDMA 
offers inherent voice privacy. Check 
with your service provider for 
availability.
1.  Open the flip and press 
 
[MENU] . 
2. Press 
  Settings & Tools .
3. Press 
  Call Settings . 
4. Press 
  Voice Privacy .5.  Use the Navigation Key 
 to 
highlight a setting, then press 
[SET] .
On/ Off
9.7 DTMF Tones
Allows you to set the DTMF tone 
length.
1.  Open the flip and press 
 
[MENU] . 
2. Press 
  Settings & Tools .
3. Press 
  Call Settings . 
4. Press 
  DTMF Tones .
5.  Use the Navigation Key 
 to 
highlight a setting, then press 
[SET] .
Normal/ Long
9.8 Assisted Dialing
Supports easy dialing on 
international calls while traveling in 
non-U.S. roaming region. If set to 
On, Assisted Dialing is displayed in 
calling screen.
1.  Open the flip and press 
 
[MENU] . 
2. Press 
  Settings & Tools .
3. Press 
  Call Settings . 
4. Press 
  Assisted Dialing . 
						

							  75
5.  Use the Navigation Key  to 
highlight a setting, then press 
.
On/ Off
6. Highlight  Reference Country  
and press the Left Soft Key 
 
[Set]  to select country.
7.  Use the Navigation Key 
 to 
scroll to the desired country.
8.  Press the Left Soft Key 
 
[Details]  to edit and save 
the Country Code, IDD Prefix 
(International Direct Dial), NDD 
Prefix(National Direct Dial), 
Area/City Code and Length 
(Length of Phone Number), 
then press 
 to set.
9. Press 
 to set.
NOTE For example, if you make a call 
fr
om China to U.S when assisted dialing 
option is on (Reference Country is set 
to 'U.S.A'), '+' code will be automatically 
replaced by the matched IDD prefix of 
China. 
10. USB Mode
Allows you to set USB mode type.
1.  Open the flip and press 
 
[MENU] .
2. Press 
  Settings & Tools .
3. Select  USB Mode . 4.  Use the Navigation Key 
 to 
select USB mode type, then 
press 
  [SET] .
Mass Storage/ Modem Mode/ 
Ask On Plug
11. Memory
Allows you to check your phone's 
internal memory. Shows the 
memory information saved in your 
phone.
1.  Open the flip and press 
 
[MENU] . 
2. Press 
  Settings & Tools .
3. Select  Memory. 
4.  Use the Navigation Key 
 to 
select file storage type in the 
phone, then press 
 to view 
the memory used.
11.1 Save Options
Allows you to select which memory 
(phone or memory card) to use to 
save your files.
1.  Open the flip and press 
 
[MENU] .
2. Press 
  Settings & Tools .
3. Select  Memory, then press 
 
Save Options .
4. Choose  Pictures/ Videos/ 
Sounds/ Ringtones . 
						

							Settings & Tools
76   
5. Choose Phone Memory/ Card 
Memory .
11.2. Phone Memory
Shows the memory usage 
information for the phone and lists 
the files, by type.
1.  Open the flip and press 
 
[MENU] .
2. Press 
  Settings & Tools .
3. Select  Memory, then press 
 
Phone Memory .
4. Choose  Memory Usage/ My 
Pictures/ My Videos/ My 
Ringtones/ My Music/ My 
Sounds/ My Contacts/ Move 
All To Card .
11.3. Card Memory
Shows the memory usage 
information for the memory card 
and lists the files, by type.
1.  Open the flip and press 
 
[MENU] .
2. Press 
  Settings & Tools .
3. Select  Memory, then press 
 
Card Memory .
4. Choose  Memory Usage/ My 
Pictures/ My Videos/ My 
Ringtones/ My Music/ My 
Sounds/My Contacts/ Move 
All To Phone .
12. Phone Info
Allows you to view the information 
specific to your phone and 
software.
1.  Open the flip and press 
 
[MENU] . 
2. Press 
  Settings & Tools .
3. Select  Phone Info .
12.1 My Number
Allows you to view your phone 
number.
1.  Open the flip and press 
 
[MENU] . 
2. Press 
  Settings & Tools .
3. Select  Phone Info .
4. Press 
  My Number .
12.2 SW/HW Version
Allows you to view the versions of 
various applications such as SW, 
PRL, ERI, Browser, Media Center, 
AVR, EMS, MMS, Bluetooth, 
OTADM Version, MSUI, HW 
Version, MEID, Warranty Date 
Code and Operating System.
1.  Open the flip and press 
 
[MENU] . 
2. Press 
  Settings & Tools .
3. Select  Phone Info . 
						

							  77
4. Press  SW/HW Version .
12.3 Icon Glossary
Allows you to view all the icons and 
their meanings.
1.  Open the flip and press 
 
[MENU] . 
2. Press 
  Settings & Tools .
3. Select  Phone Info .
4. Press 
  Icon Glossary .
5.  Select a subcategory to view  the icons.
12.4 Software Update
This feature gives your phone 
the ability to upgrade to the 
latest software and keeps your 
phone operating with the latest 
features without visiting a Verizon 
Wireless Communications Store 
for the upgrade. You can either be 
notified automatically that there 
is an updated version of software 
available for your phone, or you 
can manually check to see if there 
are any updates available for you 
to download.
Automatic Update
Your phone will receive a 
notification that there is an 
updated version of software  available to be downloaded. You 
can press 
 when notified that 
a download is available or it can 
happen automatically. Once the 
download is complete you may, 
depending on the nature of 
the update, have three options 
available: Accept the update, Defer 
the update, or Reject the update.
NOTE During the update you cannot 
mak
e or receive phone calls, including 
911 calls, or text messages.
Manual Update
1.  Open the flip and press 
 
[MENU] .
2. Press 
  Settings & Tools .
3. Select  Phone Info .
4. Press 
  Software Update .
The two options shown will be 
Status and Check New.
Press 
 Status to see the 
status of a download or update 
and see information on the last 
successful update. If updates 
have not yet been performed, 
status information will be 
unavailable.
Press 
 Check New to check 
if any new software updates are 
available to download. If a newer 
software version is available, 
it will automatically begin  
						

							Settings & Tools
78   
†CLOCK FORMAT
Select the format of the 
clock.   
Analog/ Large Analog/  
Digital 12/ Large Digital 12/ 
Digital 24/ Large Digital 24/ 
Dual City/ Off
5.  Press the Right Soft Key 
 
[Done]  to complete set-up.
downloading after 30 seconds 
or you can begin the download 
immediately by pressing 
.
12.5 Front Display Patterns
Allows you to view patterns for 
notifications on the front display 
of your phone.
13. Set-up Wizard
1.  Open the flip and press  
[MENU] . 
2. Press 
  Settings & Tools .
3. Select  Set-up Wizard .
4.  Use the Navigation Key 
 to 
scroll to a setting, then press 
  [SET] .
NOTE If you don't want to change the 
se
tting, press the Right Soft Key  
[Skip]  to go to the next setting.
†FONT SIZE
When you view menus and 
lists, you can adjust the font 
size using the Volume Keys 
.
†CALL SOUNDS
Ring Only/ Vibrate Only/ 
Ring and Vibrate/ Be Silent
†DISPLAY THEMES
Rich Gold/ Colorful Moments
†MENU LAYOUT
Grid/ List/ Tab