LG Exalt 2 User Guide

							  89
as required by the FCC for each 
model. 
The highest SAR value for this 
model phone when tested for use 
at the ear is 0.59 W/kg and when 
worn on the body, as described 
in this user guide, is 1.25 W/kg 
(body-worn measurements differ 
among phone models, depending 
upon available accessories and 
FCC requirements). While there 
may be differences between SAR 
levels of various phones and at 
various positions, they all meet the 
government requirement for safe 
exposure.
The FCC has granted an Equipment 
Authorization for this model 
phone with all reported SAR levels 
evaluated as in compliance with the 
FCC RF emission guidelines. SAR 
information on this model phone 
is on file with the FCC and can be 
found under the Display Grant 
section of http://www.fcc.gov/oet/
fccid after searching on FCC ID 
ZNFVN370. Additional information 
on Specific Absorption Rates 
(SAR) can be found on the Cellular 
Telecommunications Industry 
Association (CTIA) website at 
http://www.ctia.org/. *  
In the United States and Canada, 
the SAR limit for mobile phones 
used by the public is 
 
1.6 watts/kg (W/kg) averaged 
over one gram of tissue. 
The standard incorporates a 
substantial margin of safety to 
give additional protection for the 
public and to account for any 
variations in measurements.
FCC Hearing-Aid 
Compatibility (HAC) 
Regulations for Wireless 
Devices
On July 10, 2003, the U.S. Federal 
Communications Commission 
(FCC) Report and Order in WT 
Docket 01-309 modified the 
exception of wireless phones under 
the Hearing Aid Compatibility 
Act of 1988 (HAC Act) to 
require digital wireless phones 
be compatible with hearing-aids. 
The intent of the HAC Act is 
to ensure reasonable access to 
telecommunications services for 
persons with hearing disabilities.
While some wireless phones are 
used near some hearing devices 
(hearing aids and cochlear 
implants), users may detect a 
buzzing, humming, or whining  
						

							Safety
90  
noise. Some hearing devices are 
more immune than others to this 
interference noise, and phones also 
vary in the amount of interference 
they generate.
The wireless telephone industry 
has developed a rating system for 
wireless phones, to assist hearing 
device users to find phones that 
may be compatible with their 
hearing devices. Not all phones 
have been rated. Phones that are 
rated have the rating on their box 
or a label located on the box.
The ratings are not guarantees. 
Results will vary depending on 
the user's hearing device and 
hearing loss. If your hearing device 
happens to be vulnerable to 
interference, you may not be able 
to use a rated phone successfully. 
Trying out the phone with your 
hearing device is the best way to 
evaluate it for your personal needs.
M-Ratings: Phones rated M3 
or M4 meet FCC requirements 
and are likely to generate less 
interference to hearing devices 
than phones that are not labeled. 
M4 is the better/higher of the two 
ratings.
T-Ratings: Phones rated T3 or T4 
meet FCC requirements and are likely to generate less interference 
to hearing devices than phones 
that are not labeled. T4 is the 
better/ higher of the two ratings.
Hearing devices may also be rated. 
Your hearing device manufacturer 
or hearing health professional may 
help you find this rating. Higher 
ratings mean that the hearing 
device is relatively immune to 
interference noise. The hearing aid 
and wireless phone rating values 
are then added together. A sum 
of 5 is considered acceptable 
for normal use. A sum of 6 is 
considered for best use.
In the above example, if a hearing 
aid meets the M2 level rating and 
the wireless phone meets the 
M3 level rating, the sum of the 
two values equal M5. This should 
provide the hearing aid user with 
“normal usage” while using their 
hearing aid with the particular 
wireless phone. “Normal usage” in 
this context is defined as a signal 
quality that’s acceptable for normal 
operation. 
						

							  91
The M mark is intended to be 
synonymous with the U mark. 
The T mark is intended to 
be synonymous with the UT 
mark. The M and T marks are 
recommended by the Alliance for 
Telecommunications Industries 
Solutions (ATIS). The U and UT 
marks are referenced in Section 
20.19 of the FCC Rules. The HAC 
rating and measurement procedure 
are described in the American 
National Standards Institute 
(ANSI) C63.19 standard.
When you're talking over the cell 
phone, it's recommended you'd 
turn the BT (Bluetooth) mode off 
for HAC.Wireless Phones and Hearing Aid 
Accessibility
http://www.accesswireless.org/
Gallaudet University, RERC
http://tap.gallaudet.edu/Voice/
FCC Hearing Aid Compatibility 
and Volume Control
http://www.fcc.gov/cgb/dro/
hearing.html
The Hearing Aid Compatibility 
FCC Order
http://hraunfoss.fcc.gov/
edocs_public/attachmatch/FCC-
03-168A1.pdf
Hearing Loss Association of 
America [HLAA]
http://hearingloss.org/content/
telephones-and-mobile-devices
Caution:  
Avoid potential hearing 
loss.
Prolonged exposure to loud 
sounds (including music) is 
the most common cause of 
preventable hearing loss. Some 
scientific research suggests that 
using portable audio devices, such  
						

							Safety
92   
as portable music players and 
cellular telephones, at high volume 
settings for long durations may 
lead to permanent noise-induced 
hearing loss. This includes the 
use of headphones (including 
headsets, earbuds and Bluetooth 
or other wireless devices). 
Exposure to very loud sound has 
also been associated in some 
studies with tinnitus (a ringing in 
the ear), hypersensitivity to sound 
and distorted hearing. Individual 
susceptibility to noise-induced 
hearing loss and other potential 
hearing problems varies.
The amount of sound produced 
by a portable audio device varies 
depending on the nature of the 
sound, the device, the device 
settings and the headphones. You 
should follow some commonsense 
recommendations when using any 
portable audio device:
•  Set the volume in a quiet environment and select the 
lowest volume at which you can 
hear adequately.
•  When using headphones, turn  the volume down if you cannot 
hear the people speaking near 
you or if the person sitting next  to you can hear what you are 
listening to.
•  Do not turn the volume up to  block out noisy surroundings. 
If you choose to listen to your 
portable device in a noisy 
environment, use noise-
cancelling headphones to block 
out background environmental 
noise.
•  Limit the amount of time you  listen. As the volume increases, 
less time is required before your 
hearing could be affected.
•  Avoid using headphones after  exposure to extremely loud 
noises, such as concerts, that 
might cause temporary hearing 
loss. Temporary hearing loss 
might cause unsafe volumes to 
sound normal. 
•  Do not listen at any volume  that causes you discomfort. 
If you experience ringing in 
your ears, hear muffled speech 
or experience any temporary 
hearing difficulty after listening 
to your portable audio device, 
discontinue use and consult 
your doctor. 
						

							  93
TIA Safety Information
The following is the complete TIA 
Safety Information for wireless 
handheld phones. 
Exposure to Radio Frequency 
Signal
Your wireless handheld portable 
phone is a low power radio 
transmitter and receiver. When ON, 
it receives and sends out Radio 
Frequency (RF) signals.
In August, 1996, the Federal 
Communications Commissions 
(FCC) adopted RF exposure 
guidelines with safety levels for 
handheld wireless phones. Those 
guidelines are consistent with the 
safety standards previously set 
by both U.S. and international 
standards bodies:ANSI C95.1 (1992) *
NCRP Report 86 (1986)
ICNIRP (1996)
*   American National Standards 
Institute; National Council 
on Radiation Protection and 
Measurements; International 
Commission on Non-Ionizing 
Radiation Protection Those standards were based 
on comprehensive and periodic 
evaluations of the relevant 
scientific literature. For example, 
over 120 scientists, engineers, 
and physicians from universities, 
government health agencies, and 
industry reviewed the available 
body of research to develop the 
ANSI Standard (C95.1).
The design of your phone complies 
with the FCC guidelines (and those 
standards).
Antenna Care
Use only the supplied or an 
approved replacement antenna. 
Unauthorized antennas, 
modifications, or attachments 
could damage the phone and may 
violate FCC regulations.
Phone Operation
NORMAL POSITION: Hold the 
phone as you would any other 
telephone with the antenna 
pointed up and over your shoulder.
Tips on Efficient Operation
For your phone to operate most 
efficiently:
 
Don’t touch the antenna 
unnecessarily when the phone is 
in use. Contact with the antenna  
						

							Safety
94  
affects call quality and may cause 
the phone to operate at a higher 
power level than otherwise needed.
Electronic Devices
Most modern electronic equipment 
is shielded from RF signals. 
However, certain electronic 
equipment may not be shielded 
against the RF signals from your 
wireless phone.
Pacemakers
The Health Industry Manufacturers 
Association recommends that a 
minimum separation of six (6) 
inches be maintained between 
a handheld wireless phone and 
a pacemaker to avoid potential 
interference with the pacemaker. 
These recommendations are 
consistent with the independent 
research by and recommendations 
of Wireless Technology Research. 
Persons with pacemakers:
•  Should ALWAYS keep the phone more than six (6) inches from 
their pacemaker when the 
phone is turned ON;
•  Should not carry the phone in a  breast pocket; •  Should use the ear opposite 
the pacemaker to minimize the 
potential for interference;
•  Should turn the phone  OFF immediately if there is 
any reason to suspect that 
interference is taking place.
Hearing Aids
Some digital wireless phones may 
interfere with some hearing aids. In 
the event of such interference, you 
may want to consult your service 
provider (or call the customer 
service line to discuss alternatives). 
Other Medical Devices
If you use any other personal 
medical device, consult the 
manufacturer of your device 
to determine if it is adequately 
shielded from external RF energy. 
Your physician may be able 
to assist you in obtaining this 
information. 
Health Care Facilities
Turn your phone OFF in health 
care facilities when any regulations 
posted in these areas instruct you 
to do so. Hospitals or health care 
facilities may use equipment that 
could be sensitive to external RF 
energy. 
						

							  95
Vehicles
RF signals may affect improperly 
installed or inadequately 
shielded electronic systems in 
motor vehicles. Check with the 
manufacturer or its representative 
regarding your vehicle. You should 
also consult the manufacturer 
of any equipment that has been 
added to your vehicle.
Posted Facilities
Turn your phone OFF in any facility 
where posted notices so require.
Aircraft
FCC regulations prohibit using 
your phone while in the air. Switch 
OFF your phone before boarding 
an aircraft.
Blasting Areas
To avoid interfering with blasting 
operations, turn your phone OFF 
when in a “blasting area” or in 
areas posted: “Turn off two-
way radio”. Obey all signs and 
instructions.
Potentially Explosive Atmosphere
Turn your phone OFF when in any 
area with a potentially explosive 
atmosphere and obey all signs and 
instructions. Sparks in such areas could cause an explosion or fire 
resulting in bodily injury or even 
death.
Areas with a potentially explosive 
atmosphere are often, but not 
always marked clearly. Potential 
areas may include: fueling areas 
(such as gasoline stations); below 
deck on boats; fuel or chemical 
transfer or storage facilities; 
vehicles using liquefied petroleum 
gas (such as propane or butane); 
areas where the air contains 
chemicals or particles (such as 
grain, dust, or metal powders); and 
any other area where you would 
normally be advised to turn off 
your vehicle engine.
For Vehicles Equipped with an 
Air Bag
An air bag inflates with great force. 
DO NOT place objects, including 
either installed or portable wireless 
equipment, in the area over the air 
bag or in the air bag deployment 
area. If in-vehicle wireless 
equipment is improperly installed 
and the air bag inflates, serious 
injury could result. 
						

							Safety
96  
Safety Information
Please read and observe the 
following information for safe and 
proper use of your phone and to 
prevent damage.
Caution
Violation of the instructions may 
cause minor or serious damage 
to the product.
•  Do not disassemble or open crush, bend or deform, puncture 
or shred.
•  Do not modify or  remanufacture, attempt to insert 
foreign objects into the battery, 
immerse or expose to water or 
other liquids, expose to fire, 
explosion or other hazard. Such 
conditions may present the risk 
of fire or explosion.
•  Only use the battery for the  system for which it is specified.
•  Only use the battery with  a charging system that has 
been approved and qualified 
with the system per IEEE-
Std-1725-2006. Use of an 
unqualified and non-approved 
battery or charger may present a 
risk of fire, explosion, leakage, or 
other hazard. •  Do not short circuit a battery 
or allow metallic conductive 
objects to contact battery 
terminals.
•  Replace the battery only with  another battery that has been 
approved and qualified with 
the system per this standard, 
IEEE-Std-1725-2006. Use of an 
unqualified and non-approved 
battery may present a risk of 
fire, explosion, leakage or other 
hazard.  
Only authorized service 
providers shall replace battery 
(If the battery is non-user 
replaceable).
•  Promptly dispose of used  batteries in accordance with 
local regulations.
•  Battery usage by children should  be supervised.
•  Avoid dropping the phone or  battery. If the phone or battery 
is dropped, especially on a hard 
surface, and the user suspects 
damage, take it to a service 
center for inspection.
•  At least, one of the  Authentication methods may be 
implemented. (e.g. H/W, S/W, 
Mechanical, Hologram, etc.) 
						

							  97
•  Improper battery use may result in a fire, explosion or other 
hazard.
Charger and Adapter Safety
•  The charger and adapter are  intended for indoor use only.
•  Insert the battery pack charger  vertically into the wall power 
socket.
•  Only use the approved battery  charger. Otherwise, you may 
cause serious damage to your 
phone.
•  Use the correct adapter for your  phone when using the battery 
pack charger abroad.
Battery Information and Care
•  Always unplug the charger  from the wall socket after the 
phone is fully charged to save 
unnecessary power consumption 
of the charger.
•  Please read the user guide of  proper installation and removal 
of the battery.
•  Please read the manual of  specified charger about charging 
method.
•  Do not damage the power cord  by bending, twisting, or heating.  Do not use the plug if it is loose 
as it may cause electric shock 
or fire.
•  Do not place any heavy items  on the power cord. Do not allow 
the power cord to be crimped 
as it may cause electric shock 
or fire.
•  Unplug the power cord prior  to cleaning your phone, and 
clean the power plug pin when 
it’s dirty. When using the power 
plug, ensure that it’s firmly 
connected. If not, it may cause 
excessive heat or fire. If you put 
your phone in a pocket or bag 
without covering the receptacle 
of the phone (power plug pin), 
metallic articles (such as a coin, 
paperclip or pen) may short-
circuit the phone. Always cover 
the receptacle when not in use.
•  Recharge the battery after long  periods of non-use to maximize 
battery life. Battery life will 
vary due to usage pattern and 
environmental conditions.
•  Please use only an approved  charging accessory to charge 
your LG phone. Improper 
handling of the charging 
port, as well as the use of an 
incompatible charger, may cause  
						

							Safety
98  
damage to your phone and void 
the warranty.
•  Charging temperature range  is regulated between 32°F 
(0°C) and 104°F (40°C). Do 
not charge the battery out of 
recommended temperature 
range. Charging out of 
recommended range might 
cause the generating heat or 
serious damage of battery. 
And also, it might cause the 
deterioration of battery's 
characteristics and cycle life.
•  Do not use or leave the battery  under the blazing sun or in 
heated car by sunshine. The 
battery may generate heat, 
smoke or flame. And also, it 
might cause the deterioration 
of battery’s characteristics or 
cycle life.
•  The battery pack has protection  circuit to avoid the danger. Do 
not use nearby the place where 
generates static electricity more 
than 100V which gives damage 
to the protection circuit. If the 
protection circuit were broken, 
the battery would generate 
smoke, rupture or flame.
•  When there is rust on the  battery or if it gives off a bad or  unusual odor the first time you 
use it, do not use the equipment 
and bring the battery to the 
shop where it was purchased.
•  In case younger children use  the battery, their parents should 
teach them how to use batteries 
according to the manual with 
care. 
•  If the skin or cloth is smeared  with liquid from the battery, 
wash with fresh water. It may 
cause the skin inflammation. 
Remove and do not use the 
battery.
•  Do not handle the phone with  wet hands while it is being 
charged. It may cause an electric 
shock or seriously damage your 
phone.
•  Do not place or answer calls  while charging the phone as 
it may short-circuit the phone 
and/or cause electric shock 
or fire.
•  The charger and adapter are  intended for indoor use only.
•  Insert the battery pack charger  vertically into the wall power 
socket.
•  Only use the approved battery  charger. Otherwise, you may