LG E1911t Owners Manual

							30
Installing the Wall mount plate
This monitor satisfies the specifications of the  Wall mount plate or
the interchange device.
1.Place the monitor with its front facing downward on a soft cloth.
2.Separate the stand by pushing the PUSH button.
Warning:
You can hurt your finger.
Good Position Bad Position
 
						

							31
Installing the Wall mount plate
Wall mount plate(Separate purchase)
This is stand-type or wall mount type and is
connectable with Wall mount plate.
Please refer to the installation guide for more
details, which is provided when Wall mount
plate is purchased.
Kensington Security Slot
Connected to a locking cable that can
be purchased separately at most
computer stores.
Hole spacing : 100 mm x 100 mm.
3.Install the Wall mount plate.
NOTE
VESA compatible only with respect to screw mounting interface dimensions and mounting screw     
specifications
Please use VESA standard as below.
* 784.8 mm and under (30.9 inch) 
- Wall Mount Pad Thickness :  2.6 mm
- Screw :   4.0 mm x Pitch 0.7 mm x Length 10 mm    
* 787.4 mm and above (31.0 inch) 
- Please use VESA standard wall mount pad and screws. 
Wall Mount pad
 
						

							Make  sure  to  read  the  Safet y  Precautions before using the product.Ke e p   t h e   OW N E R ’ S   M A N UA L (C D)   i n   a n accessible place for furture reference.The  model  and  serial  number  of  the  SET  is located  on  the  back  or  one  side  of  the  SET. Record it below should you ever need service.
MODEL
SERIAL
As  an  ENERGY  STAR  Partner  LGE  U.  S. A.,Inc. has  determined  that  this  product  meets  the ENERGY STAR guidelines for energy efficiency.
E N E R G Y   S TA R   i s   a   s e t   o f   p o w e r - s a v i n g guidelines  issued  by  the  U.S.Environmental Protection Agency(EPA).