LG E1911t Owners Manual

							10
Connecting the DisplayE1911S/E2211S
NOTE‘ Self Image Setting Function’? This function provides the user with optimal display
settings.When the user connects the monitor for the first time, this function automatically adjusts
the display to optimal settings for individual input signals. 
‘AUTO’ Function? When you encounter problems such as blurry screen, blurred letters, screen
flicker or tilted screen while using the device or after changing screen resolution, press the
AUTO function button to improve resolution. 
AConnect D-sub(Analog signal) Cable 
1.Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.  
2.Connect signal input cable         and power cord        in order, then tighten the screw
of the signal cable. 
Connecting with the PC 
12
Wall-outlet type
Mac adapter :For Apple Macintosh use, a
separate plug adapter is needed to change the
15 pin high density (3 row) D-sub VGA
connector on the supplied cable to a 15 pin  2
row connector.
When using a D-Sub signal input cable connector
for Macintosh 
Varies according to model.
3.Press the power button on the front panel to turn the power on. When monitor power is
turned on, the Self Image Setting Functionis executed automatically.
Power Button
NOTE  This is a simplified representation of the rear view.
This rear view represents a general model; your display may differ from the view as shown.
Connect the signal 
input cable and tighten
it up by turning in the 
direction of the arrow 
as shown in the figure.
 
						

							11
Control Panel Functions
Front Panel Controls
E1911T/E2211T/E2411T
E1911S/E2211S
MENU ButtonOSD LOCKED/UNLOCKED
This function allows you to lock the current control
settings, so that they cannot be inadvertently changed.
Press and hold the MENU buttonfor several seconds.
The message OSD LOCKEDshould appear.
You can unlock the OSD controls at any time by pushing
the MENU buttonfor several seconds. The message
OSD UNLOCKEDshould appear.
 
						

							12
Control Panel Functions
AUTO ButtonAUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press the
AUTObutton on the MONITOR SETUP OSD. (Only
Analog Mode)
This will automatically adjust your display image to the
ideal settings for the current screen resolution size
(display mode).
The best display mode is
E1911T/E1911S : 1366 x 768
E2211T/E2211S/E2411T: 1920 x 1080
INPUT Button
Use this button to turn the display on or off.
The power indicator stays white if the display is running
properly (On Mode). If the display is in Sleep Mode
(Energy Saving), the power indicator is blinking white. Power Button &
Power Indicator
When two input signals are connected, you can select the
input signal (D-SUB/DVI) you want. When only one signal
is connected, it is automatically detected. The default
setting is D-Sub. 
(Only 
E1911T/E2211T/E2411T) (SOURCE Hot key)
Exit the OSD(On Screen Display).
EXIT Button 
SUPER ENERGY
SAVING ButtonUse this button to enter SUPER ENERGY SAVING
menu.For more information, refer to page 18.
 
						

							13
On Screen Display (OSD) Control Adjustment
Screen Adjustment
Making adjustments to the image size, position and operating
parameters of the display is quick and easy with the On Screen
Display Control system. 
A short example is given below to familiarize you with the use of the
controls. The following section is an outline of the available
adjustments and selections you can make using the OSD.
To make adjustments in the On Screen Display, follow these steps:
Press the discretionary Button, then the main menu of the OSD appears.
To access a control, use the corresponding Buttons.
Use the      /     /       Buttonsto adjust the image to the desired level. 
Use the       Button to select other sub-menu items.
Press the EXIT Buttonto exit from the OSD. 1
2
3
4
 
						

							14
On Screen Display(OSD) Selection and Adjustment 
The following table indicates all the On Screen Display control, adjustment,
and setting menus.
: D-SUB(Analog signal) input 
: DVI-D(Digital signal) inputDSUBDVI-D
To customize the screen status
for a users operating
environment To adjust the contrast of the
screen   To customize the color of the
screen
MENUTo adjust the brightness of the
screen
NOTE 
The order of icons may differ depending on the model (14~20).
DSUBDVI-D
To adjust the image size
Main menu Sub-menu            Supported inputDescription
BRIGHTNESS
ORIGINAL RATIO
COLOR TEMP 
(PRESET / USER)
CONTRAST
LANGUAGE
FACTORY RESET
SUPER
ENERGY
SAVINGTurn on the SUPER ENERGY
SAVING function.DSUBDVI-D
Turn off the SUPER ENERGY
SAVING function.
Initialize the SUPER ENERGY
SAVING and set to OFF mode.
ON
OFF
RESET
 
						

							15
On Screen Display(OSD) Selection and Adjustment 
You were introduced to the procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Sub-
menus
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
Menu Name
Icons
Button
Tip
Exit
Adjust (Decrease/Increase)
Select another sub-menu
Restart to select sub-menu
Press the MENUButton, then the main menu of the OSD appears.
 
						

							16
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu                Description
To adjust the brightness of the screen. 
Change the input image signal ratio to
original. 
WIDE
ORIGINALSwitch to full screen mode according to
input image signal.  
* This function works only if input
resolution is lower than monitor ratio
(16:9).
Exit: Exit,      ,        : Move: Select another sub-menu
PRESETSelect the screen color. 
• WARM: Set the screen to warm color    
temperature . 
• MEDIUM: Set the screen to medium  
color temperature.
• COOL: Set the screen to cool color
temperature.
REDSet your own red color levels.
GREENSet your own green color levels.
BLUESet your own blue color levels.
USER
 
						

							17
On Screen Display(OSD) Selection and Adjustment 
Main menu Description
To choose the language in which the
control names are displayed.
Press the      ,       buttons to reset
immediately.Restore all factory default settings except
LANGUAGE. 
To adjust the contrast of the screen.
Exit: Exit,      ,        : Move: Select another sub-menu
 
						

							18
On Screen Display(OSD) Selection and Adjustment 
You were introduced to the procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Sub-menus
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
Menu Name
Icons
Button
Tip Press the SUPER ENERGY SAVINGButton, then the main menu of the 
OSD appears.
Exit
Move
Restart to select sub-menu
 
						

							19
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
Exit: Exit,     : Move: Select another sub-menu
Turn on the SUPER ENERGY
SAVING fuction.
When current setting value is
ON,the SUPER SAVING color is
green.
Turn off the SUPER ENERGY
SAVING function.Now the monitor
is LED SAVING function.
When current setting value is
OFF,the SUPER SAVING color is
gray.
Clear the TOTAL POWER
REDUCTION and TOTAL CO2
REDUCTION values.
OK : Select
TOTAL POWER REDUCTION: How much power is saved during using the monitor.
TOTAL CO2 REDUCTION: Change the TOTAL POWER REDUCTION to CO2.ON
OFF
RESET