LG Dh6520t Owners Manual
Have a look at the manual LG Dh6520t Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1069 LG manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Getting Started11 Getting St\frted1 a Power cord b Speaker connectorsConnects the speaker cables. c Cooling Fan d Antenna ConnectorFM- Connects the FM wired antenna e VIDEO OUTConnects to a TV with video inputs. f COMPONENT VIDEO (Y PB PR)OUTPUTConnects to a TV with Y PB PR inputs. g \fDMI OUTConnects to TV with \fDMI inputs. (Interface for digital audio and video) h OPTICA\b INConnects to optical audio equipment. i AUX (\b/R) INPUTConnects to an external source with 2 channel audio outputs. Rear pane\b 123456 789 DH6520T-F0_BAUSLLK_ENG_6191.indd 112012-02-28 �� 4:24:27
2 Connecting 12 Connecting2 Connecting Assemb\bing t\fe speaker Before connecting the speakers, assemble the speakers. Please check the items for assembling the speakers. Preparation Pole Base Speaker Screw Speaker cables 1. Attach the base to the pole. Be careful with the orientation of the pole and base, as in the illustration. 2. Secure the connection with a supplied screw.When assembling, be careful that the pole and base do not fall down. 3. Attach the speaker to the pole, then secure the connection with a supplied screw. DH6520T-F0_BAUSLLK_ENG_6191.indd 122012-02-28 �� 4:24:27
Connecting13 Connecting2 4. Thread the speaker wire through the hole in the bottom of the base. Bottom of base 5. Connect the speaker wire to the connector on the speaker. Be careful that the speaker does not fall down. Otherwise it may result in the speaker malfunctioning and causing personal injury and/ or property damage., >C\fution DH6520T-F0_BAUSLLK_ENG_6191.indd 132012-02-28 �� 4:24:28
Connecting1\b Connecting2 Attac\fing t\fe speakers to t\fe unit 1. Connect the wires to the unit. Match each wire’s colored band to the same colored connection terminal on the rear of the unit. To connect the cable to the unit, press each plastic finger pad to open the connection terminal. Insert the wire and release the finger pad. Connect the black stripe of each wire to the terminals marked -(minus) and the other end to the terminals marked + (plus). 2. Connect the wires to the speakers. Connect the other end of each wire to the correct speaker according to the color coding: ColorSpeakerPosi\fion GreyRearRear right BlueRearRear left GreenCenterCenter OrangeSub wooferAny front position RedFrontFront right WhiteFrontFront left To connect the cable to the speakers, press each plastic finger pad to open the connection terminals on the base of each speaker. Insert the wire and release the finger pad. y Be careful to make sure children do not put their hands or any objects into the *speaker duct. *Speaker duct : A hole for plentiful bass sound on speaker cabinet (enclosure). y The speakers contain magnet parts, so color irregularity may occur on the TV screen or PC monitor screen. Please use the speakers far away from either TV screen or PC monitor., >C\fution DH6520T-F0_BAUSLLK_ENG_6191.indd 142012-02-28 �� 4:24:28
Connecting15 Connecting2 Positioning t\fe system The following illustration shows an example of positioning the system. Note that the illustrations in these instructions differ from the actual unit for explanation purposes. For the best possible surround sound, all the speakers other than the subwoofer should be placed at the same distance from the listening position (). AB D D E E F F AAA A A G G C C ABA Front left speaker (\b)/ Front right speaker (R):Place the front speakers to the sides of the monitor or screen and as flush with the screen surface as possible. Center speaker: Place the center speaker above or below the monitor or screen. Surround left speaker (\b)/ Surround right speaker (R): Place these speakers behind your listening position, facing slightly inwards. Subwoofer: The position of the subwoofer is not so critical, because low bass sounds are not highly directional. But it is better to place the subwoofer near the front speakers. Turn it slightly toward the center of the room to reduce the wall reflections. Unit DH6520T-F0_BAUSLLK_ENG_6191.indd 152012-02-28 �� 4:24:29
Connecting16 Connecting2 Connections to Your TV Make one of the following connections, depending on the capabilities of your existing equipment. y Depending on your TV and other equipment you wish to connect, there are various ways you could connect the player. Use only one of the connections described in this manual. y Please refer to the manuals of your TV, Stereo System or other devices as necessary to make the best connections., ,Note y Make sure the unit is connected directly to the TV. Tune the TV to the correct video input channel. y Do not connect your player via your VCR. The image could be distorted by the copy protection system., >C\fution Component Video Connection Connect the COMPONENT VIDEO OUTPUT jacks on the unit to the corresponding input jacks on the TV using component cables. You can hear the sound through the system’s speakers. Unit TV Green Blue Red DH6520T-F0_BAUSLLK_ENG_6191.indd 162012-02-28 �� 4:24:29
Connecting17 Connecting2 HDMI Out Connection If you have a \fDMI TV or monitor, you can connect it to this unit using a \fDMI cable ( Type A, \figh Speed \fDMI™ Cable). Connect the \fDMI OUT jack on the unit to the \fDMI IN jack on a \fDMI compatible TV or monitor. Set the TV’s source to \fDMI (refer to TV’s Owner’s manual). Unit TV y You can fully enjoy digital audio and video signals together with this \fDMI connection. y When you use \fDMI connection, you can change the resolution for the \fDMI output. (Refer to “Resolution Setting” on page 19.), ,Tip y If a connected \fDMI device does not accept the audio output of the unit, the \fDMI device’s audio sound may be distorted or may not output. y When you connect a \fDMI or DVI compatible device make sure of the following: - Try switching off the \fDMI/DVI device and this unit. Next, switch on the \fDMI/ DVI device and leave it for around 30 seconds, then switch on this unit. - The connected device’s video input is set correctly for this unit. - The connected device is compatible with 720 x 480i (or 576i), 720 x 480p (or 576p), 1 280 x 720p, 1 920 x 1 080i or 1 920 x 1 080p video input. y Not all \fDCP-compatible \fDMI or DVI devices will work with this unit. - The picture will not be displayed properly with non-\fDCP device. - This unit does not playback and TV screen is changed to black or green screen or the snow noise may occur on the screen. y If there is noise or lines on the screen, please check the \fDMI cable and use a higher version cable than \figh Speed \fDMI™ Cable. , ,Note y Changing the resolution when the connection has already been established may result in malfunctions. To solve the problem, turn off the unit and then turn it on again. y When the \fDMI connection with \fDCP is not verified, TV screen is changed to black or green screen or the snow noise may occur on the screen. In this case, check the the \fDMI connection, or disconnect the \fDMI cable., >C\fution DH6520T-F0_BAUSLLK_ENG_6191.indd 172012-02-28 �� 4:24:29
Connecting18 Connecting2 Video Connection Connect the VIDEO OUT jack on the unit to the video in jack on the TV using a video cable. You can hear the sound through the system’s speakers. Unit TV Yellow DH6520T-F0_BAUSLLK_ENG_6191.indd 182012-02-28 �� 4:24:30
Connecting19 Connecting2 Reso\bution Setting The unit provides several output resolutions for \fDMI OUT and COMPONENT VIDEO OUT jacks. You can change the resolution using [Setup] menu. 1. Press n HOME. 2. Use \f/D to select the [Setup] and press b ENTER. The [Setup] menu appears. 3. Use W/S to select [Display] option then press D to move to the second level. 4. Use W/S to select the [Resolution] option then press D to move to the third level. 5. Use W/S to select the desired resolution then press b ENTER to confirm your selection. If your TV does not accept the resolution you have set on the player, you can set resolution to 480p (or 576p) as follows: Press \b STOP for more than 5 seconds., ,Note Video Output Reso\bution Displayed resolution in display window and outputted resolution may different according to connection type. [\fDMI OUT ]: 1 080p, 1 080i, 720p and 480p (or 576p) and 480i (or 576i) [COMPONENT VIDEO OUT ]: 480p (or 576p) and 480i (or 576i) [ VIDEO OUT ]: 480i (or 576i) DH6520T-F0_BAUSLLK_ENG_6191.indd 192012-02-28 �� 4:24:30
Connecting20 Connecting2 Optiona\b Equipment Connection AUX In Connection Connect an Output of auxiliary device to the AUX (\b/R) INPUT Connector. UnitRedWhite To \fhe au\bio ou\fpu\f j\gacks of your componen\f (TV, VCR, e\fc.) If your TV has only one output for audio (mono), connect it to the left (white) audio jack on the unit., ,Note AUDIO (PORT. IN) In Connection Connect an output of portable device (MP3 or PMP etc) to the AUDIO (PORT. IN) input connector. MP3 player, etc... Listening to music from your portab\be p\bayer or externa\b device The unit can be used to play the music from many types of portable player or external devices. 1. Connect the portable player to the PORT. IN (PORTAB\bE IN) connector of the unit. Or Connect the external device to the AUX connector of the unit. 2. Turn the power on by pressing 1 (POWER). 3. Select the PORTAB\bE or AUX (\b/R) INPUT function by pressing P RADIO&INPUT. 4. Turn on the portable player or external device and start it playing. DH6520T-F0_BAUSLLK_ENG_6191.indd 202012-02-28 �� 4:24:30