LG Dh6520t Owners Manual

Getting Started11
Getting St\frted1
a	 Power	cord
b	 Speaker	connectorsConnects	the	speaker	cables.
c	 Cooling	Fan
d	 Antenna	ConnectorFM-	Connects	the	FM	wired	antenna
e	 VIDEO	OUTConnects	to	a	TV	with	video	inputs.
f	 COMPONENT	 VIDEO	(Y	PB	PR)OUTPUTConnects	to	a	TV	with	Y	PB	PR	inputs.		
g	 \fDMI	OUTConnects	to	 TV	with	\fDMI	inputs.	(Interface	for	digital	audio	and	video)	
h	 OPTICA\b	INConnects	to	optical	audio	equipment.
i	 AUX	(\b/R)	INPUTConnects	to	an	external	source	with	2	channel	audio...

2	 Connecting
12
Connecting2
Connecting
Assemb\bing t\fe 
speaker
Before	connecting	the	speakers,	assemble	the	speakers.	Please	check	the	items	for	assembling	the	speakers.
Preparation
Pole
Base
Speaker
Screw
Speaker	cables
1.	 Attach	the	base	to	the	pole.	Be	careful	with	the	orientation	of	the	pole	and	base,	as	in	the	illustration.	
2.	 Secure	the	connection	with	a	supplied	screw.When	assembling,	be	careful	that	the	pole	and	base	do	not	fall	down.
3.	 Attach	the	speaker	to	the	pole,	then	secure	the...

Connecting13
Connecting2
4.	 Thread	the	speaker	wire	through	the	hole	in	the	bottom	of	the	base.
Bottom	of	base
5.	 Connect	the	speaker	wire	to	the	connector	on	the	speaker.
Be	careful	that	the	speaker		
does	not	fall	down.	
Otherwise	it	may	result	in		
the	speaker	malfunctioning		
and	causing	personal	injury		
and/	or	property	damage.,
>C\fution
DH6520T-F0_BAUSLLK_ENG_6191.indd   132012-02-28   �� 4:24:28 

Connecting1\b
Connecting2
Attac\fing t\fe speakers 
to t\fe unit
1.	 Connect	the	wires	to	the	unit.	Match	each	wire’s	colored	band	to	the	same	colored	connection	terminal	on	the	rear	of	the	unit.	To	connect	the	cable	to	the	unit,	press	each	plastic	finger	pad	to	open	the	connection	terminal.	Insert	the	wire	and	release	the	finger	pad.
Connect	the	black	stripe	of	each	wire	to	the	terminals	marked	-(minus)	and	the	other	end	to	the	terminals	marked	+	(plus).	
2.	 Connect	the	wires	to	the	speakers.	Connect...

Connecting15
Connecting2
Positioning t\fe system
The	following	illustration	shows	an	example	of	positioning	the	system.	Note	that	the	illustrations	in	these	instructions	differ	from	the	actual	unit	for	explanation	purposes.
For	the	best	possible	surround	sound,	all	the	speakers	other	than	the	subwoofer	should	be	placed	at	the	same	distance	from	the	listening
position	().
AB
D
D
E
E
F
F
AAA
A
A
G
G
C
C
ABA
		Front	left	speaker	(\b)/		Front	right	speaker	(R):Place	the	front	speakers	to	the	sides	of	the...

Connecting16
Connecting2
Connections to Your 
TV
Make	one	of	the	following	connections,	depending	on	the	capabilities	of	your	existing	equipment.
	
y Depending	on	your	
TV	and	other	
equipment	you	wish	to	connect,	there	are	
various	ways	you	could	connect	the	player.	
Use	only	one	of	the	connections	described	
in	this	manual.
	
y Please	refer	to	the	manuals	of	your	
TV,	
Stereo 	System 	or 	other 	devices 	as 	necessary	
to	make	the	best	connections.,
,Note
	
y Make	sure	the	unit	is	connected	directly...

Connecting17
Connecting2
HDMI Out Connection
If	you	have	a	\fDMI	TV	or	monitor,	you	can	connect	it	to	this	unit	using	a	\fDMI	cable	( Type	A,	\figh	Speed	\fDMI™	Cable).	Connect	the	\fDMI	OUT	jack	on	the	unit	to	the	\fDMI	IN	jack	on	a	\fDMI	compatible	 TV	or	monitor.		Set	the	TV’s	source	to	\fDMI	(refer	to	 TV’s	Owner’s	manual).	
Unit
TV
	
y You	can	fully	enjoy	digital	audio	and	video	
signals	together	with	this	\fDMI	connection.
	
y When	you	use	\fDMI	connection,	you	can	
change	the	resolution	for	the...

Connecting18
Connecting2
Video Connection
Connect	the	VIDEO	OUT	jack	on	the	unit	to	the	video	in	jack	on	the	 TV	using	a	video	cable.
You	can	hear	the	sound	through	the	system’s	speakers.
Unit
TV Yellow
DH6520T-F0_BAUSLLK_ENG_6191.indd   182012-02-28   �� 4:24:30 

Connecting19
Connecting2
Reso\bution Setting
The	unit	provides	several	output	resolutions	for	\fDMI	OUT	and	COMPONENT	VIDEO	OUT	jacks.	You	can	change	the	resolution	using	[Setup]	menu.
1.	 Press	n	HOME.
2.	 Use	\f/D	to	select	the	[Setup]	and	press	b	ENTER.	The	[Setup]	menu	appears.
3.	 Use	W/S	to	select	[Display]	option	then	press	D	to	move	to	the	second	level.	
4.	 Use	W/S	to	select	the	[Resolution]	option	then	press	D	to	move	to	the	third	level.
5.	 Use	W/S	to	select	the	desired	resolution	then	press	b...

Connecting20
Connecting2
Optiona\b Equipment 
Connection
AUX In Connection
Connect	an	Output	of	auxiliary	device	to	the	AUX	(\b/R)	INPUT	Connector.
UnitRedWhite
To \fhe au\bio ou\fpu\f j\gacks 
of your componen\f  
(TV, VCR, e\fc.)
If	your	 TV	has	only	one	output	for	audio	
(mono), 	connect 	it 	to 	the 	left 	(white) 	audio 	jack	
on	the	unit.,
,Note
AUDIO (PORT. IN) In 
Connection
Connect	an	output	of	portable	device	(MP3	or	PMP	etc)	to	the	AUDIO	(PORT.	IN)	input	connector.	
MP3	player,	etc......