LG Bh 7520t Owners Manual

							System Setting31
System Setting3
9. Check all the settings that you have set in the previous steps.
Press ENTER (b) while [Finish] is highlighted to finish the initial setup settings. If there is any settings to be changed, use A/D to select [Previous] and press ENTER (b).
Adjust the Setup Settings
You can change the settings of the player in the [Setup] menu.
1. Press HOME ().
2. Use A/D to select the [Setup] and press ENTER (b). The [Setup] menu appears.
3. Use W/S to select the first setup option, and press D to move to the second level.
4. Use W/S to select a second setup option, and press ENTER (b) to move to the third level.
5. Use W/S to select a desired setting, and press ENTER (b) to confirm your selection.
 
						

							System Setting32
System  Setting3
[DISPLAY] Menu
TV Aspect Ratio
Select a TV aspect ratio option according to your TV type.
[4:3 Letter Box]
Select when a standard 4:3 TV is connected. Displays theatrical images with masking bars above and below the picture.
[4:3 Pan Scan]
Select when a standard 4:3 TV is connected. Displays pictures cropped to fill your TV screen. Both sides of the picture are cut off.
[16:9 Original]
Select when a 16:9 wide TV is connected. The 4:3 picture is displayed with an original 4:3 aspect ratio, with black bars appearing at the left and right sides.
[16:9 Full]
Select when a 16:9 wide TV is connected. The 4:3 picture is adjusted horizontally (in a linear proportion) to fill the entire screen.
You cannot select [4:3 Letter Box] and  
[4:3 Pan Scan] option when the resolution is 
set to higher than 720p. 
,Note
Resolution
Sets the output resolution of the HDMI video signal. Refer to page 20 for details about the resolution setting.
[Auto]
If the HDMI OUT jack is connected to TVs providing display information (EDID), automatically selects the resolution best suited to the connected TV. 
[1080p]
Outputs 1080 lines of progressive video.
[1080i]
Outputs 1080 lines of interlaced video.
[720p]
Outputs 720 lines of progressive video.
[480p]
Outputs 480 lines of progressive video.
[480i]
Outputs 480 lines of interlaced video.
1080p Display Mode
When the resolution is set to 1080p, select  [24 Hz] for smooth presentation of film material (1080p/24 Hz) with a HDMI-equipped display compatible with 1080p/24 Hz input.
 
y When you select [24 Hz], you may 
experience some picture disturbance when 
the video switches video and film material. 
In this case, select [60 Hz].
 
y Even when [1080p Display Mode] is set to  
[24 Hz], if your TV is not compatible with 
1080p/24 Hz, the actual frame frequency of 
the video output will be 60 Hz to match the 
video source format. 
,Note
 
						

							33
System Setting3
HDMI Color Setting
Select the type of output from the HDMI OUT jack. For this setting, please refer to the  manuals of your display device. 
[YCbCr]
Select when connecting to a HDMI display device.
[RGB]
Select when connecting to a DVI display device.
3D Mode
Select the type of output mode for Blu-ray 3D disc playback. 
[Off ]
Blu-ray 3D disc playback will output as 2D mode like a normal BD-ROM disc playback. 
[On]
Blu-ray 3D disc playback will output as 3D mode.
Wallpaper
Changes the background of the initial screen.
Home Menu Guide
This function allows you to display or delete the guide bubble on the Home Menu. Set this option to [On] for displaying guide.
[LANGUAGE] Menu 
Display Menu
Select a language for the [Setup] menu and on-screen display.
Disc Menu/Disc Audio/ 
Disc Subtitle
Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu.
[Original] 
Refers to the original language in which the disc was recorded.
[Other]
Press ENTER (b) to select another language. Use number buttons then press ENTER (b) to enter the corresponding 4-digit number according to the language code list on page 69.
[Off ] (Disc Subtitle only)
Turn off Subtitle.
Depending on the disc, your language setting 
may not work.
 
,Note
 System Setting
 
						

							System Setting34
System  Setting3
[AUDIO] Menu 
Each disc has a variety of audio output options. Set the player’s Audio options according to the type of audio system you use. 
Since many factors affect the type of audio 
output, see “Audio Output Specifications” on 
page 72 for details. 
,Note
Digital Output
[PCM Stereo] (HDMI only)
Select if you connect this unit’s HDMI OUT jack to a device with two-channel digital stereo decoder. 
[PCM Multi-Ch] (HDMI only)
Select if you connect this unit’s HDMI OUT jack to a device with multi-channel digital decoder. 
[DTS Re-Encode] (HDMI only)
Select if you connect this unit’s HDMI OUT jack to a device with DTS decoder. 
[Bit Stream] (HDMI only)
Select if you connect this unit’s HDMI OUT jack to a device with LPCM, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS and DTS-HD decoder.
 
y When [Digital Output] option is set to [PCM 
Multi-Ch], the audio may output as PCM 
Stereo if the PCM Multi-Ch information is 
not detected from HDMI device with EDID.
 
y If the [Digital Output] option is set to [DTS 
Re-Encode], the DTS Re-Encode audio is 
outputted for BD-ROM discs with secondary 
audio and the original audio is outputted 
for the other discs (like [Bit Stream]).
 
y This setting is not available on the input 
signal from an external device.
 
,Note
Speaker Setup
To obtain the best possible sound, use the speaker setup display to specify the volume of the speakers you have connected and their distance from your listening position. Use the test to adjust the volume of the speakers to the same level.
[Speaker]
Select a speaker that you want to adjust.
[Volume]
Adjust the output level of each speaker. 
[Distance]
Adjust the distance between each speaker and the listening position.
[Test/ Stop test tone]
The speakers will emit a test tone. 
[OK]
Confirms the setting.
[Cancel]
Cancels the setting.
 
						

							System Setting35
System Setting3
HD AV Sync
Sometimes Digital TV encounters a delay between picture and sound. If this happens you can compensate by setting a delay on the sound so that it effectively ‘waits’ for the picture to arrive: this is called HD AV Sync. Use W S to scroll up and down through the delay amount, which you can set at anything between 0 and 300 ms. 
DRC (Dynamic Range Control) 
This function allows you to listen to a movie at a lower volume without losing clarity of sound.
[Off ]
Turns off this function.
[On]
Compress the dynamic range of the Dolby Digital, Dolby Digital Plus or Dolby TrueHD audio output.
[Auto]
The dynamic range of the Dolby TrueHD audio output is specified by itself.  And the dynamic range of the Dolby Digital and Dolby Digital Plus are operated as same as the [On] mode.
The DRC setting can be changed only when a 
disc is not inserted or the unit is in complete 
stop mode. 
,Note
 
						

							System Setting36
System  Setting3
[LOCK] Menu
The [LOCK] settings affect only BD-ROM and DVD playback.
To access the any features in [LOCK] settings, you must enter the 4-digit security code you have created.  If you have not entered a password yet, you are prompted to do so. Enter a 4-digit password twice, and press ENTER (b) to create a new password.
Password
You can create or change the password.
[None]
Enter a 4-digit password twice, and press ENTER (b) to create a new password.
[Change]
Enter the current password and press ENTER (b). Enter a 4-digit password twice, and press ENTER (b) to create a new password.
If you forget your password
If you forget your password, you can clear it using the following steps:
1. Remove any disc that might be in the player.
2. Select [Password] option in the [Setup] menu.
3. Use Number buttons to enter “210499”. The password is cleared.
If you make a mistake before pressing ENTER 
(
b ), press CLEAR. Then input the correct 
password. 
,Note
DVD Rating 
Blocks playback of rated DVD based on their content. (Not all discs are rated.)
[Rating 1-8]
Rating one (1) has the most restrictions and rating eight (8) is the least restrictive.
[Unlock]
If you select [Unlock], parental control is not active and the disc plays in full.
Blu-ray Disc Rating
Set an age limit of BD-ROM play. Use number buttons to input an age limit for BD-ROM viewing.
[255] 
All BD-ROM can be played.
[0-254]
Prohibits play of BD-ROM with corresponding ratings recorded on them.
The [Blu-ray Disc Rating] will be applied only 
for the BD disc that containing the Advanced 
Rating Control. 
,Note
Area Code 
Enter the code of the area whose standards were used to rate the DVD video disc, based on the list on page 68.
 
						

							System Setting37
System Setting3
[NETWORK] Menu
The [NETWORK] settings are needed to use the software update, BD Live and on-line content services.
Connection Setting
If your home network environment is ready to connect the player, the player needs to be set the wired or wireless network connection for network communication. (See “Connecting to your Home Network” on page 24-28.)
Connection Status
If you want to check the network status on this player, select the [Connection Status] options and press ENTER (b) to check whether a connection to the network and the internet have been established.
BD-LIVE connection
You can restrict Internet access when BD-LIVE functions are used.
[Permitted]
Internet access is permitted for all BD-LIVE contents.
[Partially permitted]
Internet access is permitted only for BD-LIVE contents which have content owner certificates. Internet access and AACS Online functions are prohibited for all BD-LIVE contents without a certificate.
[Prohibited]
Internet access is prohibited for all BD-LIVE contents.
Netflix
[Netflix ESN]
Display its unique Netflix ESN (Electronic Serial Number) that allows you to use the Netflix streaming.
[Deactivate Netflix]
Deactivates your player. To activate the Netflix again, contact to the service provider.
Premium/LG Apps
[Country Setting]
Select your area for displaying proper services and contents on the [Premium] and [LG Apps] feature.
Device Name
You can make a network name using virtual keyboard. This player will be recognised by the name you are entering on your home network.
Wi-Fi Direct
This player is a Wi-Fi Direct™ certified device. Wi-Fi Direct™ is the technology that devices to connect each other without connecting to an Access point or a router. Set this option to [On] for activating the Wi-Fi Direct™ mode. Refer to page 42 for the device connection.
[OTHERS] Menu
DivX VOD
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand ( VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration.
 
						

							System Setting38
System  Setting3
[Register]
Displays the registration code of your player.
[Deregister]
Deactivate your player and display the deactivation code.
All the downloaded videos from DivX(R) VOD 
with this player’s registration code can only be 
played on this unit. 
,Note
Network Play
This function allows you to control the playback of media streamed from DLNA media server by a DLNA certified smartphone. Most DLNA certified smartphone has a function to control the playback media on your home network. Set this option to [On] for allowing your smartphone to control this unit. Refer to instructions of your DLNA certified smartphone or the application for more detailed information.
 
y This unit and the DLNA Certified Smartphone 
must be connected to the same network.
 
y To use the [Network Play] function using a 
DLNA certified smartphone, press HOME 
(
) to display the home menu before 
connecting to this unit.
 
y While controlling the unit using the [Network 
Play] function, the remote control may not work.
 
y Available file formats described on page 
10 are not always supported on [Network 
Play] function.
 
,Note
Auto Power Off
The screen saver appears when you leave the player in Stop mode for about five minutes. If you set this option to [On], the unit automatically turns off within 20 minutes since the Screen Saver is displayed. Set this option to [Off ] to leave the screen saver until the unit is operated by the user.
Depending on the function, this function may 
not be available. 
,Note
Initialize
[Factory Set]
You can reset the player to its original factory settings.
[Blu-ray Storage Clear]
Initializes the BD-Live contents from the connected USB storage.
If you reset the player to its original factory 
settings using [Factory Set] option, you have 
to set all the activation for the on-line services 
and network settings again. 
,Note
Software 
[Information]
Displays the current software version.
[Update]
You can update the software by connecting the unit directly to the software update server (see page 64-65).
Disclaimer Notice
Press ENTER (b) to view the notice of Network Service Disclaimer.
 
						

							System Setting39
System Setting3
Sound Effect
You can select a suitable sound mode. Press SOUND EFFECT repeatedly until the desired mode appears on the front panel display or the TV screen. The displayed items for the equalizer maybe different depending on sound sources and effects.
[Natural Plus]: You can enjoy the natural sound effect same as 5.1 channel.
[Natural]: You can enjoy comfortable and natural sound.
[Bypass]: Software with multichannel surround audio signals is played according to the way it was recorded.
[Bass Blast]: Reinforce the bass sound effect from front left and right speaker and subwoofer.
[Clear Voice]: This mode makes voice sound clear, improving the quality of voice sound. 
[Game]: You can enjoy more virtual sound while playing video games.
[Night]: This may be useful when you want to watch movies at low volumes late at night.
[Up Scaler]: When listening to MP3 files or other compressed music, you can enhance the sound. This mode is available only to 2 channel sources.
[Loudness]: Improves bass and treble sound.
[User EQ]: You can adjust the sound by raising or lowering the level of specific frequency.
Setting the [User EQ]
1. Use W/S to select the desired frequency.
2. Use A/D to select the desired level. 
Select [Cancel] option then press ENTER (b) to cancel the setting.  Select [Reset] option then press ENTER (b) to reset the all adjustments.
3D Sound Effect
3D Sound features create a wider spot so you can enjoy more immersive and cinematic surround sound. Press 3D SOUND repeatedly until the desired mode appears on the front panel display or the TV screen. 
[3D Music]: This mode delivers outstanding surround sound, providing a concert hall-like music experience in your home.
[3D Movie]: This mode delivers outstanding surround sound, providing a theater-like movie experience in your home.
 
						

							4 Operating  
Operating40
Operating4
General Playback
Using [HOME] menu
The home menu appears when you press HOME (). Use W/S/A/D to select a category and press ENTER (b).
k
Depending on the region, [LG Apps] service 
and [Search] function may not be available 
at the moment. The service may become 
available in these regions through at software 
update later. 
,Note
a[Music] - Plays audio contents. 
b[Movie] - Plays video contents. 
c[Photo] - Plays photo contents.
d[Premium] - Displays the Premium Home screen.
e[LG Apps] - Displays the [LG Apps] screen.
f[Input] - Changes input mode.
g[Setup] - Adjusts the system settings.
h[Search] - Searching an on-line content by inputting a keyword on the search menu. 
i[LG Apps] - Displays the [LG Apps] screen.
j[Favorite Apps] - Shortcut for user’s favorite Apps.
k[My Apps] - Displays the My Apps screen. 
Playing a Disc
erot
1.  Insert a disc in the disc slot.
For the most Audio CD, BD-ROM and  DVD-ROM discs, playback starts automatically.
2. Press HOME ().
3. Select [Movie] or [Music] using A/D, and press ENTER (b).
4. Select [Blu-ray Disc], [DVD], [ VR] or [Audio] option using W/S, and press ENTER (b).
 
y Playback functions described in this manual 
are not always available in every files and 
media. Some functions can be restricted 
depending on many factors.
 
y Depending on the BD-ROM titles, a USB 
device connection may be needed for the 
proper playback.
 
y Unfinalized DVD VR format discs may not be 
played in this player.
 
y Some DVD-VR discs are made with CPRM 
data by DVD RECORDER. This unit cannot 
support these kinds of discs. 
,Note
Playing a file on a disc/USB 
device
yui
This player can play movie, music and photo files contained in the disc or USB device.
1.  Insert a data disc in the disc slot or connect a USB device.
2. Press HOME ().
3. Select [Movie], [Photo] or [Music] using A/D, and press ENTER (b).
4. Select [Data] or [USB] option using W/S, and press ENTER (b).
5. Select a file using W/S/A/D, and press d(PLAY ) or ENTER (b) to play the file.