LG Bh 7520t Owners Manual

							Connecting21
Connecting2
 
y If your TV does not accept the resolution 
you have set on the player, you can set 
resolution to 480p as follows:
1. 
Press HOME (
) to disappear the HOME 
menu.
2 Press  Z (STOP) for more than 5 seconds.
 
y When you set the resolution to 480i with 
HDMI connection, actual resolution is 
outputted to 480p.
 
y If you select a resolution manually and then 
connect the HDMI jack to TV and your TV 
does not accept it, the resolution setting is 
set to [Auto].
 
y If you select a resolution that your TV 
does not accept, the warning message 
will appear. After resolution change, 
if you cannot see the screen, please 
wait 20 seconds and the resolution will 
automatically revert back to the previous 
resolution.
 
y The 1080p video output frame rate may 
be automatically set to either 24 Hz or 
60 Hz depending both on the capability 
and preference of the connected TV and 
based on the native video frame rate of the 
content on the BD-ROM disc.
 
y The resolution of the VIDEO OUT jack is 
always outputted at 480i resolution.
 
,NoteAntenna connection
Connect the supplied antenna for listening to the radio.
Rear of the unit
After connecting the FM wire antenna, keep 
it as horizontal as possible. Be sure to fully 
extend the FM wire antenna.
 
,Note
 
						

							22
Connecting2
Connecting
Connections with 
external device
AUX Connection
You can enjoy the sound from an external component through the speakers of this system.
Connect the analog audio output jacks of your component into the AUX L/R (INPUT ) on this unit. And then select the [AUX] option by pressing FUNCTION and ENTER (b).
You can also use the F (Function) button on the front panel to select the input mode.
To the audio output jacks of your component  ( TV, VCR, etc.)
Rear of the unit
Red
White
PORT. IN connection
You can enjoy the sound from your portable audio player through the speakers of this system.
Connect the headphones (or line out ) jack of the portable audio player into the PORT. IN socket of this unit. And then select the [PORTABLE] option by pressing FUNCTION and ENTER (b).
You can also use the F (Function) button on the front panel to select the input mode.
MP3 player, etc...
 
						

							Connecting23
Connecting2
OPTICAL IN connection
You can enjoy the sound from your component with a digital optical connection through the speakers of this system.
Connect the optical output jack of your component into the OPTICAL IN jack on the unit. And then select the [OPTICAL] option by pressing FUNCTION and ENTER (b). Or press OPTICAL to select directly.
You can also use the F (Function) button on the front panel to select the input mode.
To the digital 
optical output jack 
of your componentRear of the unit
HDMI IN 1/2 connection
You can enjoy the pictures and sound  from your component through this connection.
Connect the HDMI OUT jack of your component into the HDMI IN 1 or 2 jack on this unit. And then select the [HDMI IN 1/2] option by pressing FUNCTION and ENTER (b). 
You can also use the F (Function) button on the front panel to select the input mode.
To the HDMI 
OUT jack of your 
component 
(set-top box, digital 
satellite receiver, 
video game 
machine, etc.)Rear of the unit
 
y You cannot change the video resolution in 
the HDMI IN 1/2 mode. Change the video 
resolution of the connected component.
 
y If the video output signal is abnormal when 
your personal computer is connected to 
HDMI IN 1/2 jack, change the resolution 
of your personal computer to 480p, 720p, 
1080i or 1080p.
 
y The video signal from the HDMI input 
cannot be output from the component or 
composite video outputs.
 
y The player sends audio from the HDMI 
inputs to both the HDMI output and to the 
unit’s speakers. 
,Note
 
						

							Connecting24
Connecting2
Connecting to your 
Home Network
This player can be connected to a local area network (LAN) via the LAN port on the rear panel or the internal wireless module.  By connecting the unit to a broadband home network, you have access to services such as software updates, BD-LIVE interactivity and on-line content services.
Wired network connection
Using a wired network provides the best performance, because the attached devices connect directly to the network and are not subject to radio frequency interference.
Please refer to the documentation for your network device for further instructions.
Connect the player’s LAN port to the corresponding port on your Modem or Router using a commercially available LAN or Ethernet cable.
 
y When plugging or unplugging the LAN 
cable, hold the plug portion of the cable. 
When unplugging, do not pull on the LAN 
cable but unplug while pressing down on 
the lock.
 
y Do not connect a modular phone cable to 
the LAN port.
 
y Since there are various connection 
configurations, please follow the 
specifications of your telecommunication 
carrier or internet service provider.
 
y If you want to access content from DLNA 
servers, this player must be connected to 
the same local area network with them via a 
router.
 
y To set your PC as a DLNA server, install the 
supplied Nero MediaHome 4 on your PC. 
(see page 66) 
,Note
Rear of the unit Router
Broadband  
service
DLNA certified servers
 
						

							Connecting25
Connecting2
Wired Network Setup
If there is a DHCP server on the local area network (LAN) via wired connection, this player will automatically be allocated an IP address. After making the physical connection, a small number of home networks may require the player’s network setting to be adjusted. Adjust the [NETWORK] setting as follow.
Preparation
Before setting the wired network, you need to 
connect the broadband internet to your home 
network.
1. Select [Connection Setting] option in the [Setup] menu then press ENTER (b). 
2. Read the preparations for the network settings and then press ENTER (b) while [Start] is highlighted.
Network will automatically be connected to the unit.
Advanced Setting
If you want to set the network settings manually, use W/S to select [Advanced Setting] on the [Network Setting] menu and press ENTER (b).
1. Use W/S to select [ Wired] and press ENTER (b).
2. Use W/S/A/D to select the IP mode between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP address automatically.
If there is no DHCP server on the network and 
you want to set the IP address manually, select 
[Static] then set [IP Address], [Subnet Mask], 
[Gateway] and [DNS Server] using  
W/S/A/D  and numerical buttons. If you 
make a mistake while entering a number, press 
CLEAR to clear the highlighted part.
 
,Note
3.  Select [Next] and press ENTER (b) to apply network settings.
Network connection status is displayed on the screen.
4. Press ENTER (b) while [Close] is highlighted to finish the wired network settings.
 
						

							Connecting26
Connecting2
Wireless Network Connection
Another connection option is to use an Access Point or a wireless router. The network configuration and connection method may vary depending on the equipment in use and the network environment.
Wireless 
Communication
DLNA certified servers
Access Point or  
Wireless Router
Broadband  
service
Refer to the setup instructions supplied with your access point or wireless router for detailed connection steps and network settings.
For best performance, a direct wired connection from this player to your home network’s router or cable/DSL modem is always the best option.  If you do chose to use the wireless option, note that performance can sometimes be affected by other electronic devices in the home.
Wireless Network Setup
For the wireless network connection, the player needs to be set up for network communication. This adjustment can be done from the [Setup] menu. Adjust the [NETWORK] setting as follow. Setting up the access point or the wireless router is required before connecting the player to the network.
Preparation
Before setting the wireless network, you need 
to:  
-
connect the broadband internet to the 
wireless home network.
 
-
set the access point or wireless router.
 
-
note the SSID and security code of the 
network.
1.  Select [Connection Setting] option in the [Setup] menu then press ENTER (b). 
2. Read the preparations for the network settings and then press ENTER (b) while [Start] is highlighted.
If wired network is not connected to the unit, all available networks are displayed on the screen.
3. Use W/S to select a desired SSID of wireless network and press ENTER (b).
If you have security on your access point, you need to input the security code as necessary.
 
						

							Connecting27
Connecting2
 
y WEP security mode generally have 4 keys 
available on an access point setting. If your 
access point or wireless router use WEP 
security, enter the security code of the key 
“No.1” to connect on your home network.
 
y An Access Point is a device that allows you 
to connect to your home network wirelessly. 
,Note
4. Use W/S/A/D to select the IP mode between [Dynamic] and [Static]. Normally, select [Dynamic] to allocate an IP address automatically.
If there is no DHCP server on the network and 
you want to set the IP address manually, select 
[Static] then set [IP Address], [Subnet Mask], 
[Gateway] and [DNS Server] using  
W/S/A/D  and numerical buttons. If you 
make a mistake while entering a number, press 
CLEAR to clear the highlighted part. 
,Note
5.  Select [Next] and press ENTER (b) to apply network settings.
Network connection status is displayed on the screen.
6. Select [Close] and press ENTER (b) to complete the network connection.
Advanced Setting
If you want to set the network settings manually, use W/S to select [Advanced Setting] on the [Network Setting] menu and press ENTER (b).
1. Use W/S to select [ Wireless] and press ENTER (b).
[AP List] - Scans all available access points or wireless routers within range and display them as a list.
[Network name (SSID)] – Your access point may not be broadcasting its network name (SSID). Check your access point settings through your computer and either set your access point to broadcast SSID, or manually enter the network name in [Network name(SSID)].
[PBC] – If your access point or wireless router that supports the PBC (Push Button Configuration) method, select this option and press the Push Button on your access point within 120 counts. You do not need to know the network name (SSID) and security code of your access point.
[PIN] – If your access point supports the PIN Code configuration method based on WPS( Wi-Fi Protected Setup), select this option and note the code number on the screen. And then, enter the PIN number on a setting menu of your access point to connect. Refer to the documentation for your network device.
2. Follow the instructions of each connection method on the screen.
To use PBC and PIN network connection, 
security mode of your access point must be 
set to OPEN or AES. 
,Note
 
						

							Connecting28
Connecting2
Notes on Network Connection:
 yMany network connection problems during set up can often be fixed by re-setting the router or modem. After connecting the player to the home network, quickly power off and/or disconnect the power cable of the home network router or cable modem. Then power on and/or connect the power cable again.
 yDepending on the internet service provider (ISP), the number of devices that can receive internet service may be limited by the applicable terms of service. For details, contact your ISP.
 yOur company is not responsible for any malfunction of the player and/or the internet connection feature due to communication errors/malfunctions associated with your broadband internet connection, or other connected equipment.
 yThe features of BD-ROM discs made available through the Internet Connection feature are not created or provided by our company, and our company is not responsible for their functionality or continued availability. Some disc related material available by the Internet Connection may not be compatible with this player. If you have questions about such content, please contact the producer of the disc.
 ySome internet contents may require a higher bandwidth connection.
 yEven if the player is properly connected and configured, some internet contents may not operate properly because of internet congestion, the quality or bandwidth of your internet service, or problems at the provider of the content.
 ySome internet connection operations may not be possible due to certain restrictions set by the Internet service provider (ISP) supplying your broadband Internet connection.
 yAny fees charged by an ISP including, without limitation, connection charges are your responsibility.
 yA 10 Base-T or 100 Base-TX LAN port is required for wired connection to this player. If your internet service does not allow for such a connection, you will not be able to connect the player.
 yYou must use a Router to use xDSL service.
 yA DSL modem is required to use DSL service and a cable modem is required to use cable modem service. Depending on the access method of and subscriber agreement with your ISP, you may not be able to use the internet connection feature contained in this player or you may be limited to the number of devices you can connect at the same time. (If your ISP limits subscription to one device, this player may not be allowed to connect when a PC is already connected.)
 yThe use of a “Router” may not be allowed or its usage may be limited depending on the policies and restrictions of your ISP. For details, contact your ISP directly.
 yThe wireless network operate at 2.4GHz radio frequencies that are also used by other household devices such as cordless telephone, Bluetooth® devices, microwave oven, and can be affected by interference from them.
 yTurn off all unused network equipment in your local home network. Some devices may generate network traffic.
 yFor the purpose of the better transmission, placing the player from the access point as close as possible.
 yIn some instances, placing the access point or wireless router at least 0.45 m (1.5 ft.) above the floor may improve the reception.
 yMove closer to the access point if possible or re-orient the player so there is nothing between it and the access point.
 yThe reception quality over wireless depends on many factors such as type of the access point, distance between the player and access point, and the location of the player.
 ySet your access point or wireless router to Infrastructure mode. Ad-hoc mode is not supported.
 
						

							Connecting29
Connecting2
USB device connection
This player can play movie, music and photo files contained in the USB device.
Playback content in the USB 
device
1. Insert a USB device to the USB port until it fits into place.
When you connect the USB device on the HOME menu, the player plays a music file contained in the USB storage device automatically. If the USB storage device is containing various types of files, a menu for the file type selection will appear.
File loading may takes few minutes depending on the number of content stored in the USB storage device. Press ENTER (b) while [Cancel] is selected to stop loading.
2. Press HOME ().
3. Select [Movie], [Photo] or [Music] using A/D, and press ENTER (b).
4. Select the [USB] option using W/S, and press ENTER (b).
5. Select a file using W/S/A/D, and press PLAY or ENTER (b) to play the file.
6. Withdraw the USB device carefully.
 
y This player supports USB flash drive/
external HDD formatted in FAT16, FAT32 and 
NTFS when accessing files (music, photo, 
movie). However, for BD-Live and Audio CD 
recording, only FAT16 and FAT32 formats 
are supported. Use the USB flash drive/
external HDD formatted in either FAT16 or 
FAT32 when using BD-Live and Audio CD 
recording.
 
y The USB device can be used for the local 
storage for enjoying BD-LIVE discs with 
Internet.
 
y This unit can support up to 4 partitions of 
the USB device.
 
y Do not extract the USB device during 
operation (play, etc.). 
 
y A USB device which requires additional 
program installation when you have 
connected it to a computer, is not 
supported.
 
y USB device: USB device that supports 
USB1.1 and USB2.0.
 
y Movie, music and photo files can be played. 
For details of operations on each file, refer to 
relevant pages.
 
y Regular back up is recommended to 
prevent data loss.
 
y If you use a USB extension cable, USB HUB 
or USB Multi-reader, the USB device may not 
be recognized.
 
y Some USB device may not work with this 
unit.
 
y Digital camera and mobile phone are not 
supported.
 
y USB Port of the unit cannot be connected 
to PC. The unit cannot be used as a storage 
device.
 
,Note
 
						

							3 System Setting
System Setting30
System  Setting3
Settings
Initial Setup
When you turn on the unit for the first time, the initial setup wizard appears on the screen. Set the display language, network setting and speaker setup on the initial setup wizard.
1. Press 1 (POWER). 
The initial setup wizard appears on the screen.
2. Use W/S/A/D to select a display language and press ENTER (b).
3. Read and prepare the preparations for the network settings and then press ENTER (b) while [Start] is highlighted.
If wired network is connected , the network connection setting will automatically be finished.
4. All available networks are displayed on the screen. Use W/S to select [ Wired Network] or desired SSID of wireless network and press ENTER (b).
If you have security on your access point, you need to input the security code as necessary.
5. Use W/S/A/D to select the IP mode between [Dynamic] and [Static]. Normally, select [Dynamic] to allocate an IP address automatically.
6. Select [Next] and press ENTER (b) to apply network settings.
Network connection status is displayed on the screen. For details on network settings, refer to "Connecting to your Home Network" on page 24.
7. Select [Next] and press ENTER (b).
8.  Press ENTER (b) to verify the test tone signals of the speakers. 
After verifying the test tone signals, press ENTER (b) while [Stop] is highlighted.  Select [Next] and press ENTER (b).