LG 60pz750s Owners Manual

							21
ENGENGLISH
REMOTE	CONTROL
REMOTE	CONTROL
The descriptions in this manual are based on the buttons on the remote control. 
Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching 
 
and  ends to the label inside the compartment, and close the battery cover. Be sure to 
point the remote control toward the remote control sensor on the TV.
To remove the batteries, perform the installation actions in reverse.
yy Do not mix old and new batteries, as this may damage the remote control.
CAUTION
Alphanumeric	buttonsEnters letters and numbers.
LIST
 (See p.37)
Accesses the saved programme list.
](Space)
Opens an empty space on the screen keyboard.
Q.VIEW
Returns to the previously viewed programme.
 (POWER)
Turns the TV on or off.
LIGHT  
Illuminates the remote control buttons.
ENERGY	 SAVING (See p.95)
Adjusts the brightness of the screen to reduce energy consumption .
AV	MODE (See p.40)
Selects an AV mode.
INPUT (See p.41)
Changes the input source; Turns the TV on.
TV/RAD
Selects Radio, TV and DTV programme.
  
						

							22
ENGENGLISH
REMOTE	CONTROL
Premium
Accesses the Premium menus. 
Home 
Accesses the Home menu.
Q.	MENU (See p.42)
Accesses the quick menus.
3D	OPTION	(Only 3D models) ( See p.90)
Used for viewing 3D video.
Direct access to your internet portal of entertainment and news services developed by Orange. (Only France)Navigation	buttons	(up/down/left/right) 
Scrolls through menus or options.
OK
Selects menus or options and confirms your input.
BACK
Returns to the previous level.
GUIDE
Shows programme guide.
EXIT
Clears all on-screen displays and return to TV viewing.
AV MODE
LIGHT
INPUTTV/
RADENERGY
 SAVING
1.,;@2 abc3 def
4 ghi5 \fkl6 \bno
7pqrs8 tuv
0[
9 wxyz
BACK EXIT
OK
LISTQ.VIEW
Pre\biu\bHo\be
Q.MENUGUIDE
APP/
*
INFO RATIO
FAV
RATIO
MUTE
MARK
DELETE
CHAR/NUMPP
A
G
E
L/R SELECT
LIVE TV
AD
GUIDE
@SMART TV
3D OPTION
	+ -
Adjusts the volume level.
MARK
Selects a menu or option.
FAV (See p.38)
Accesses your favourite programme list.
CHAR/NUM
Switches between Letter and Number input modes.
3D	(Only 3D models)  (See p.90)
Uses for viewing 3D video. 
RATIO (See p.39)
Resizes an image.
DELETE 
Deletes letters and numbers. 
MUTE
Mutes all sounds.
P	Scrolls through the saved programmes .
PAGE
Moves to the previous or next screen.
  
						

							23
ENGENGLISH
REMOTE	CONTROL
Coloured	buttons 
These access special functions in some menus.
SUBTITLERecalls your preferred subtitle in digital mode.
Control	buttons	()Controls the Premium contents, DVR or Smart Share menus or the SIM -
PLINK compatible devices (USB or SIMPLINK or DVR).
LIVE	TV (See p.77) 
Return to the LIVE TV.
FREEZE
Freezes the current frame while using the TV, AV, Component, RGB-PC, or 
HDMI input source.
REC
Uses to adjust DVR menu.
INFO (See p.88) 
Views the information of the current programme and screen.
AD
Switches the Audio Description On or Off.
RATIO (See p.39)
Resizes an image.
GUIDE
Shows programme guide.
SIMPLINK (See p.120) 
Accesses the AV devices connected to the TV;   
Opens the SIMPLINK menu.
APP/ *
Select the MHP TV menu source. (Only Italy)
(Depending on model)
TELETEXT	BUTTONS (See p.122 )
These buttons are used for teletext.
For further details, see the ‘Teletext’ section.
  
						

							24
ENGENGLISH
REMOTE	CONTROL
This item is not included for all models.
Refer to the Magic Motion Remote Control manual for operating instructions.
Please read this manual carefully and use the TV correctly.
When the message "Magic motion remote control battery is low. Change the bat-
tery." is displayed, replace the battery. 
To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching 
 and  ends to the label inside the compartment, and close the battery cover. Be 
sure to point the remote control toward the remote control sensor on the  TV.
To remove the batteries, perform the installation actions in reverse.
Magic	Motion	Remote	Control	Functions
 (POWER) 
Turns the TV on or off.
MUTE
Mutes all sounds.
Navigation	buttons
 (up/down/
left/right) 
Scrolls through menus or options. Pointer	(RF	transmitter) 
Blinks the light when operating.
Home
Accesses the Home menu.
OK
Selects menus or options and 
confirms your input. 
Press this button to display the 
pointer when it disappears from the 
screen. You can control the TV by 
selecting Quick Menu on the screen.
- 
If you press the Navigation button 
while moving the pointer on the 
screen, the pointer disappears, and 
the Magic Motion remote control 
works as a common remote control.
  To display the pointer again, shake 
the Magic Motion remote control 
from side to side within two minutes 
after it disappeared.
 (If two minutes 
have passed, press the OK button 
to display the pointer.)
yy Do not mix old and new batteries, as this may damage the remote control
CAUTION
 Home Menu Programme List  Quick Menu
	+ -
Adjusts the volume level.
P	
ꕌꕍScrolls through the saved pro-
grammes.
Only 3D models
 
						

							25
ENGENGLISH
REMOTE	CONTROL
Registering	Magic	M otion	R emote 	
Control
The Magic Motion Remote Control operates by 
pairing with your TV.
Register the Magic Motion Remote Control to use.
How	to	register	the	Magic	Motion	Remote	
Control
To register the remote control, press the  OK button 
on the remote control while aiming it at your TV.
How	to	Re-register	the	Magic	Motion	Remote	
Control	after	Registration	Failure
Reset the remote control by pressing and holding 
both the 
OK and MUTE buttons for 5 seconds. 
(Once the reset is complete, the light on the 
Pointer blinks.) Then repeat the above procedure 
to register the remote control.
How	to	use	M agic	M otion	R emote 	
Control
1 Press OK button if there is no pointer on your 
TV screen. The pointer will then appear on the 
screen.
If the pointer has not been used for a certain 
period of time, it will disappear.
2 You can move the pointer by aiming the Pointer 
Receiver of the remote control at your TV then 
move it left, right, up or down.
If the pointer does not work properly after click -
ing the 
OK button, leave the remote control for 
10 seconds then use it again.
Precautions	to	Take	when	Using	
the	Magic	Motion	Remote	Control
y
y Use the remote control within the maximum 
communication distance (10 m). Using the 
remote control beyond this distance, or with 
an object obstructing it, may cause a com
-
munication failure.
y
y A communication failure may occur due to 
nearby devices. Electrical devices such as 
a microwave oven or wireless LAN product 
may cause interference, as this will use the 
same bandwidth (2.4 GHz) as the Magic Mo
-
tion Remote Control.
y
y The Magic Motion Remote Control may be 
damaged or may malfunction if it is dropped 
or receives a heavy impact.
y
y When playing a game using the Magic Mo
-
tion Remote Control, hold it securely by 
wrapping its strap around your wrist and 
adjusting the length with the adjustable ring.
y
y Take care not to bump into nearby furniture 
or other people when using the Magic Motion 
Remote Control.
y
y Manufacturer and installer cannot provide 
service related to human safety as the ap
-
plicable wireless device has possibility of 
electric wave interference.
y
y It is recommended that an Access Point (AP) 
be located more than 1 m away from the 
TV. If the AP is installed closer than 1 m, the 
magic motion remote control may not perform 
as expected due to frequency interference.
  
						

							26
ENGENGLISH
WATCHING	TV
WATCHING	TV
Connecting	to	an	antenna
Connect an antenna to watch TV while referring to 
the following.
To prevent damage do not connect to the mains 
outlet until all connections are made between the 
devices.
 
Connecting	an	antenna
Connect the TV to a wall antenna socket with an  
RF cable (75 
).
yy Use a signal splitter to use more than 2 
TVs.
y
y If the image quality is poor, install a signal 
amplifier properly to improve the image 
quality.
y
y If the image quality is poor with an 
antenna connected, aim the antenna to 
the correct direction.
y
y An antenna cable and converter are not 
supplied.
NOTE
Wall Antenna Socket
Connecting	with	a	satellite	dish
(Only Satellite models)
Connect the TV to a satellite dish to a satellite 
socket with a satellite RF cable 
(75 
).
Satellite Dish
  
						

							27
ENGENGLISH
WATCHING	TV
4 When the basic settings are complete, 
press OK.
yyIf you do not complete the Initial setting, it 
will appear whenever the TV turns on.
y
y Disconnect the power cord from the 
power outlet when you do not use the TV 
for a long period of time.
NOTE
5 To turn the TV off, press    (POWER). 
yy For those countries without confirmed 
DTV broadcasting standards, some DTV 
features might not work, depending on 
the DTV broadcasting environment.
y
y When France is selected for Country, 
password is not ‘0’, ‘0’, ‘0’, ‘0’ but ‘1’, ‘2’, 
‘3’, ‘4’.
y
y To display images in the best quality for 
your home environment, select 
Home	
Use.
y
y
Store	Demo is suitable for the retail 
environment.
y
y If you select 
Store	Demo, any 
customized settings will switch back to 
the default settings of 
Store	Demo in 5 
minutes.
NOTETurning	the	TV	on	for	the	
first	time
When you turn the TV on for the first time, the 
Initial setting screen appears. Select a language 
and customize the basic settings.
1 Connect the power cord to a power outlet.
2 In Standby mode, press  ( POWER) to turn the 
TV on. 
The Initial setting screen appears if you turn 
the TV on for the first time.
3 Follow the on -screen instructions to customize 
your TV settings according to your preferences.
Selects a language to display.
Selects 
Home	Use for the 
home environment.
Sets the power indicator.
(When you select Home Use 
from Mode Setting - only 
LED LCD TV)
Selects a country to display. (Depending on model)
Language

Mode	Setting

Power	Indicator

Country

Time	Zone

Set	Password

Auto	Tuning
Selects the time zone and 
daylight saving.
(When Russia is selected for 
Country)
Scans and saves available 
programmes automatically. Sets the password.
(When France is selected for 
Country)
yy You can also access Factory	Reset by 
accessing  OPTION in the Home menu - 
SETUP .
NOTE
Watching	TV
1 In Standby mode, press  (POWER) to turn the 
TV on.
2 Press INPUT	and select Antenna.
3 To turn the TV off, press  ( POWER).
The TV switches to Standby mode.
  
						

							28
ENGENGLISH
WATCHING	TV
Accessing	Home	menu
1 Press Home to access the Home menu.
2 Press the Navigation buttons to scroll to one of the following menus and press OK.
3 Press the Navigation buttons to scroll to the setting or option you want and press OK.
4 When you are finished, press  EXIT. 
Option Description
1Current Date, Time
2Channel programme info
3Function card: You can enjoy various content files by selecting 
each card and you can edit the premium card by selecting 5 items.
4Function card position
5Sign In
6Exit
7Current watching channel screen
8INPUT, SETUP, GUIDE menu.
9Launcher bar
Sign In
Premium
Search
Sat. Jan. 1, 2011  12:00
World Nature 5:05 ~ 5:55
LG Apps
Web Browser Media Link ArrowSudokuMy Apps
INPUT
SETUP
GUIDE
LG AppsHOT NEWExitUCC Service
Movie Online Weather InfoPhoto Album
Social Network Service
1
7
8
9 4
56
2 3
Unit convertor
National-flag
Mah-Jong Puzzle
Horoscope
Winesound
  
						

							29
ENGENGLISH
WATCHING	TV
Managing	programmes
Selecting	Antenna,
Use this to automatically find and store all avail-
able programmes.
When you start auto programming, all previously 
stored service information will be deleted.
1 Press Home to access the Home menu.
2 Press the Navigation buttons  to scroll to 
SETUP and press OK.
3 Press the Navigation buttons to scroll to 
SETUP and press OK.
4 Press the Navigation buttons to scroll to 
Auto	Tuning and press OK.
5 Press the Navigation buttons to scroll to 
Antenna and press OK.
6 Select Start to start automatic tuning.
The TV scans and saves available pro -
grammes automatically.
7 When you are finished, press  EXIT.
When you return to the previous menu, press 
BACK .
NOTE
yyIf the TV scans a blocked programme, you 
will be prompted to enter your password to 
keep the programme scanned.
y
y You can store up to 1,200 programmes 
(Except for Satellite models) or  6,000 
programmes (Only Satellite models) . The 
number of programmes that you can store 
differs depending on the broadcasting signal 
environment.
y
y
 When select Italy  in the Country menu, if the 
pop up is displayed when the conflicted pro -
gramme after Auto Tuning, select a broadcast -
er for conflicting programme number to solve.
y
y When select UK in the Country menu, if the pop 
up is displayed when the conflicted programme 
after Auto Tuning, select a regions, country for 
conflicting programme number to solve.
y
y When selected  Norway in the Country menu, 
If Network name is recognized more than two 
after Auto Tuning, you can select your desired 
one. Programme lists are arranged based 
on the selected Network name. (Only Nordic 
models)
y
y In the following country, DVB cable can be 
used : Germany, Netherlands, Sweden, 
Switzerland, Denmark, Austria, Finland, Nor-
way, Slovenia, Hungary, Ukraine, Bulgaria, 
Ireland, Poland, Romania, Russia, Lithuania, 
Estonia, Latvia, Spain. (The supported coun -
try can be added.)
Automatically	s etting	u p	p rogramme1 Press Home to access the Home menu.
2 Press the Navigation buttons  to scroll to 
SETUP and press OK. 
3 Press the Navigation buttons to scroll to 
SETUP and press OK.
4 Press the Navigation buttons to scroll to 
Auto	Tuning and press OK.
5 Press the Navigation buttons to scroll to 
Cable and press OK. 
6 Press the Navigation buttons to scroll to 
Service	Operator and press OK.
7 Press the Navigation buttons or Number but-
tons to scroll make appropriate adjustments 
and press OK.
8 Select Start to start automatic tuning.
The TV scans and saves available pro -
grammes automatically.
9 When you are finished, press  EXIT.
When you return to the previous menu, press 
BACK .
Selecting	Cable,
NOTE
yyIf the TV scans a blocked programme, you 
will be prompted to enter your password to 
keep the programme scanned.
y
y Use this to automatically find and store all 
avail able programmes. When you start auto programming, all previously stored service 
information will be deleted.
y
y When you select the Cable, the 
Cable	Service	Operator selection screen can differ 
or not exist by the Cable situation of the ap -
plicable country.
y
y The popup window to select 
Service	Opera-
tor is only shown initially for the 3 cases 
when you accessing the 
Initial	Setting 
menu, when you change from  Antenna to 
Cable or when you access the menu after 
changing the  Country.
y
y When you want to select Service Operator 
aside from the above 3 cases, you can do so 
by selecting 
Setup	-> Cable	DTV	Setting	-> Service	Operator.
  
						

							30
ENGENGLISH
WATCHING	TV
y
y Acquired certification SO : 
Sweden(Comhem, Canal Dig -
ital), Denmark(YouSee, Canal Dig -
ital, Stofa), Norway(Canal Digital), 
Netherlands(Ziggo, UPC Digitaal), 
Ukraine(Volia-Cable), Germany(KDG), 
Switzerland(CableCom, UPC), 
Austria(UPC Digital), Hungary(UPC Dig -
ital), Ireland(UPC Digital), Poland(UPC 
Digital), Romania(UPC Digital), 
Russia(OnLime).
y
y If there are not any Service Operator 
that you want, select 
Other	Operators.
y
y If you select “
Other	Operators”, or 
the selected country supports “
Other	
Operators” only, it may take some time 
to search all the channels, or it may not 
search some of the channels.
The following values are needed in order to search 
all available programmes quickly and correctly.
The commonly used values are provided as "de -
fault".
However, for correct settings, please inquire of the 
cable service provider.
When running 
Auto	Tuning in DVB cable mode, 
selecting Full will search through all frequencies to 
find available channels.
In the case when the programme is not searched 
by selecting the Default, perform the searching by 
selecting the Full.
However, in the case when the programme is 
searched by selecting the Full, the Auto Tuning 
time can be taken too much.  •
	Frequency : Enter a user-defined frequency.
• Symbol	rate : Enter a user-defined symbol rate 
(Symbol rate: Speed at which a device such as 
modem sends symbols to a channel).
• Modulation  : Enter a user-defined modulation. 
(Modulation: Loading of audio or video signals 
onto carrier).
•
	Network	ID : Unique identifier allocated for 
each user.
• 
Start	Frequency : Enter a user-defined start 
frequency range.
• 
End	Frequency : Enter a user-defined end 
frequency range.
1 Press Home to access the Home menu.
2 Press the Navigation buttons to scroll to 
SETUP and press OK. 
3 Press the Navigation buttons  to scroll to 
SETUP and press OK.
4 Press the Navigation buttons to scroll to 
Auto	Tuning and press OK.
5 Press the Navigation buttons to scroll to 
Satellite and press OK.
6 Press the Navigation buttons to scroll make 
appropriate adjustments and press  OK.
7 Select Start to start automatic tuning.
The TV scans and saves available pro -
grammes automatically.
8 When you are finished, press  EXIT.
When you return to the previous menu, press 
BACK .
Selecting	Satellite,
NOTE
yyProgramme	Type : You can select All	
Programmes ,	FTA	Programme or Paid	
Programme .
y
y
Network	Search : You can search through 
both an existing 
Transponder	List and the 
Transponder	List that was transmitted via 
NIT.
y
y You can change the 
Setting	ID	Info from the 
Setting menu.
y
y You can Add/Delete the 
Setting	ID from the 
SETUP	->	Satellite	DTV	Setting menu.
y
y If more than 6000 programmes are stored, 
you cannot store any more programmes. To 
add programmes, delete the unused setting 
IDs in SETUP -> 
Satellite	DTV	Setting and 
tune the TV again.
(Only Satellite models)