LG 60pz750s Owners Manual

							111
ENGENGLISH
MAKING	CONNECTIONS
MAKING	CONNECTIONS
Connect various external devices to the TV and switch input modes to select an external device. For more 
information on external device’s connection, refer to the manual provided with each device.
Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, 
PC, gaming devices, and other external devices.
yyIf you record a TV programme on a DVD recorder or VCR, make sure to connect the TV 
signal input cable to the TV through a DVD recorder or VCR. For more information on 
recording, refer to the manual provided with the connected device.
y
y The external device connection may differ from the model.
y
y Connect external devices to the TV regardless of the order of the TV port.
NOTE
  
						

							112
ENGENGLISH
MAKING	CONNECTIONS
Connection	Overview
Connect various external devices to the ports on the TV back panel.
1 Find an external device you want to connect to your TV as shown on the following illustration.
2 Check the connection type of  the external device.
3 Go to the appropriate illustration and check the connection details.
HDMI	–	See	p.113DVI	–	See	p.113Component	–	See	p.114Composite	–	See	p.115
Digital	–	See	p.118
HDMI	–	See	p.116DVI	–	See	p.116RGB	–	See	p.117
HDMI	–	See	p.113DVI	–	See	p.113Component	–	See	p.114Composite	–	See	p.115
Euro	Scart	–	See	p.114
Composite	–	See	p.115
Euro	Scart	– 	See	p.114
Memory	storage	–	See	p.119Memory	card	reader	–	See	p.119
HDMI	–	See	p.113Component	–	See	p.114Composite	–	See	p.115
HD	ReceiverDVD VCR
Speaker USB
PC
Gaming	device
yy If you connect a gaming device to the TV, use the cable supplied with the gaming device.
y
y Refer to the external equipment's manual for operating instructions.
NOTE
  
						

							113
ENGENGLISH
MAKING	CONNECTIONS
DVI	to	HDMI	Connection
Transmits the digital video signal from an external 
device to the TV. Connect the external device and 
the TV with the DVI-HDMI cable as shown in the 
following illustration. To transmit an audio signal, 
connect an audio cable.
Connecting	to	a	H D	r eceiver, 	
DVD,	or	VCR	player
Connect a HD receiver, DVD, or VCR player to the 
TV and select an appropriate input mode.
HDMI	Connection
Transmits the digital video and audio signals from 
an external device to the TV. Connect the external 
device and the TV with the HDMI cable as shown 
in the following illustration.
yyUse the latest High Speed HDMI™ Cable 
with CEC (Customer Electronics Control) 
function. 
y
y High Speed HDMI™ Cables are tested 
to carry an HD signal up to 1080p and 
higher.
NOTE
yyThis section on MAKING	CONNECTIONS 
mainly uses diagrams for the 
32/37/42/47LV37 ** models.
y
y Image shown may differ from your TV.
  
						

							114
ENGENGLISH
MAKING	CONNECTIONS
Euro	Scart	Connection
Transmits the video and audio signals from an 
external device to the TV set. Connect the external 
device and the TV set with the Euro Scart cable as 
shown on the following illustration. To display im-
ages by using progressive scan, make sure to use 
the Euro Scart cable.
yy Any Euro scart cable used must be 
signal shielded.
y
y When watching digital TV in 3D imaging 
mode, monitor out signals cannot be 
output through the SCART cable. (Only 
3D models)
y
y
 If you set the 3D mode to On while a 
scheduled recording is performed on 
digital TV, monitor out signals cannot 
be output through the SCART cable, 
and the recording cannot be performed. 
(Only 3D models)
NOTE
yy If cables are installed incorrectly, it could 
case the image to display in black and 
white or with distorted colour. Check to 
ensure the cable are matched with the 
corresponding colour connection.
NOTE
Component	Connection
Transmits the analogue video and audio signals 
from an external device to the TV. Connect the 
external device and the TV with the component 
cable as shown in the following illustration.
         Output Type 
Current 
input mode AV1
(TV Out1) AV1(When DTV scheduled 
recording is in progress 
using recording equipment.)
Digital TV Digital TVO
Analogue TV, AV Analogue TVO
(The input mode is 
converted to DTV.)Component/RGB Analogue TV
HDMI XX
1  TV Out : Out puts Analogue TV or Digital TV signals.
  
						

							115
ENGENGLISH
MAKING	CONNECTIONS
Composite	Connection
Transmits the analogue video and audio signals 
from an external device to the TV. Connect the 
external device and the TV with the composite 
cable as shown in the following illustration.
yyIf you have a mono VCR, connect the 
audio cable from the VCR to the AUDIO 
L/MONO jack of the TV.
NOTE
Connecting	to	a	PC
yy
It is recommended to use the TV set with 
the HDMI connection for the best image 
quality.
NOTE
  
						

							116
ENGENGLISH
MAKING	CONNECTIONS
DVI	to	HDMI	Connection
Transmits the digital video signal from your PC to 
the TV. Connect the PC and the TV with the DVI-
HDMI cable as shown in the following illustration. 
To transmit an audio signal, connect an audio 
cable.
HDMI	Connection
Transmits the digital video and audio signals from 
your PC to the TV. Connect the PC and the TV 
with the HDMI cable as shown in the following 
illustrations.
  
						

							117
ENGENGLISH
MAKING	CONNECTIONS
RGB	Connection
Transmits the analogue video signal from your 
PC to the TV. Connect the PC and the TV with the 
supplied D-sub 15 pin signal cable as shown in the 
following illustrations. To transmit an audio signal, 
connect an audio cable.yy There may be interference relating to 
resolution, vertical pattern, contrast or 
brightness in PC mode. Change the PC 
mode to another resolution or change the 
refresh rate to another rate or adjust the 
brightness and contrast on the menu until the 
picture is clear. If the refresh rate of the PC 
graphic card can not be changed, change the 
PC graphic card or consult the manufacturer 
of the PC graphic card.
y
y The synchronization input waveform for 
Horizontal and Vertical frequencies are 
separate.
y
y We recommend using 1920x1080, 60 Hz for 
the PC mode, this should provide the best 
picture quality.
y
y Connect the signal cable from the monitor 
output port of the PC to the RGB (PC) port 
of the TV or the signal cable from the HDMI 
output port of the PC to the HDMI IN (or 
HDMI/DVI IN) port on the TV.
y
y Connect the audio cable from the PC to the 
Audio input on the TV. (Audio cables are not 
included with the TV).
y
y If using a sound card, adjust PC sound as 
required.
y
y If the graphic card on the PC does not output 
analogue and digital RGB simultaneously, 
connect only one of either RGB or HDMI IN 
(or HDMI/DVI IN) to display the PC output on 
the TV.
y
y DOS mode may not work depending on the 
video card if you use an HDMI to DVI cable.
y
y If you use too long an RGB-PC cable, there 
may be interference on the screen. We 
recommend using under 5m of cable. This 
provides the best picture quality.
NOTE
  
						

							118
ENGENGLISH
MAKING	CONNECTIONS
Connecting	to	a n	A udio	
System
Use an external audio system instead of the built-
in speaker.
yyIf you use an external audio device instead 
of the built-in speaker, set the TV speaker 
feature to off. (
See p.101)
NOTE
Digital	Optical	Audio 	 Connection
Transmits the digital audio signal from the TV to an 
external device. Connect the external device and 
the TV with the optical audio cable as shown in the 
following illustration.
Connecting	to	H eadphone	
Connection
(Depending on model) 
Listen to the sound through a headphone.
yyAUDIO menu items are disabled when 
connecting a headphone.
y
y When changing 
AV	MODE with a 
headphone connected, the change is 
applied to video but not to audio.
y
y Optical Digital Audio Out is not available 
when connecting a headphone.
y
y Headphone impedance: 16 
yyMax audio output of headphone: 10 mW 
to 15 mW
y
y Headphone jack size: 0.35 cm
NOTE
yy
Do not look into the optical output port. 
Looking at the laser beam may damage your 
vision.
CAUTION
  
						

							119
ENGENGLISH
MAKING	CONNECTIONS
Connecting	to	a	USB
Connect a USB storage device such as s USB 
flash memory, external hard drive or a USB 
memory card reader to the TV and access the 
Smart Share menu to use various multimedia files. 
See “Connecting USB storage devices” and see 
“Browsing files”.
Connecting	to	a	CI	Module
View the encrypted (pay) services in digital TV 
mode. This feature is not available in all countries.
(See p.38).
Check this point as shown 
and insert the CI Module. 
yyCheck if the CI module is inserted into the 
PCMCIA card slot in the right direction. If 
the module is not inserted properly, this can 
cause damage to the TV and the PCMCIA 
card slot.
NOTE
or
  
						

							120
ENGENGLISH
MAKING	CONNECTIONS
Connecting	the	Wireless	
Media	Box
(Depending on model)
LG TVs with a Wireless Control port support the 
LG Wireless Media Box, which is sold separately. 
When you connect the Wireless Ready Dongle 
(included with the Wireless Media Box) to the 
TV, external devices can be connected to the LG 
Wireless Media Box and video and audio will be 
sent to the TV wirelessly.
Refer to the Wireless Media Box manual for 
operating instructions.
yyWhen using the external device connected 
to the Wireless Media Box, some functions 
of the TV menu may not work.
NOTE
LG	Wireless	Media	Box
SIMPLINK	Connection
Play and control the AV device connected with 
the HDMI cable through HDMI-CEC. 
This TV may 
work with the devices that support HDMI-CEC, but 
only devices with the 
logo are fully sup-
ported.
Connect one end of the HDMI cable to the HDMI/
DVI IN or HDMI IN terminal on the rear of the TV 
and the other end to the SIMPLINK device.
yy If the connected device does not support 
HDMI-CEC, the SIMPLINK feature is 
unavailable.
y
y To operate SIMPLINK, an High Speed 
HDMI Cable with *CEC function should 
be used. (*CEC: Consumer Electronics 
Control).
y
y SIMPLINK may not work properly if you a 
third-party device that has an HDMI-CEC 
function.
y
y In wireless external output, SIMPLINK 
function is not supported.
NOTE