LG 60ld550 Owners Manual
Have a look at the manual LG 60ld550 Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1069 LG manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
23 WATCHING TV / PROGRAMME CONTROL ■When you select the Full, Search every available signal. Full OK Close • If you wish to keep on auto tuning, select Start using the button. Then, press the OK button. Otherwise select Close. • Automatic Numbering: Decide whether to use the programme numbers as sent by broadcasting stations for tuning. • Skip Scramble Programme : Scramble Programme is skipped in Auto Tuning and Manual Tuning. • Press the MENU/EXIT button to return to normal TV viewing. • Press the BACK button to move to the previous menu screen. 6Select Full. 7Select OK. 8Select Start. 9Run Auto tuning. Check your antenna connection.The previous channel informationwill be updated during Auto Tuning. Skip Scramble ProgrammeAutomatic Numbering Start Close Cable Cable
24 WATCHING TV / PROGRAMME CONTROL WATCHING TV / PROGRAMME CONTROL The following values are needed in order to search all available programmes quickly and correctly. The commonly used values are provided as "default". However, for correct settings, please inquire of the cable service provider. When running Auto Tuning in DVB cable mode, selecting Full will search through all frequencies to find available channels. In the case when the programme is not searched by selecting the Default, perform the searching by selecting the Full. However, in the case when the programme is searched by selecting the Full, the Auto Tuning time can be taken too much. • Frequency : Enter a user-defined frequency. • Symbol rate : Enter a user-defined symbol rate (Symbol rate: Speed at which a device such as modem sends symbols to a channel). • Modulation : Enter a user-defined modulation. (Modulation: Loading of audio or video signals onto carrier). • Network ID : Unique identifier allocated for each user. • Start Frequency : Enter a user-defined start frequency range. • End Frequency : Enter a user-defined end frequency range.
25 WATCHING TV / PROGRAMME CONTROL CABLE DTV SETTING (IN CABLE MODE ONLY) The range that a user can select from the Service Operator menu differs depending on number of Service Operator supported by each country, and if number of supported Service Operator for each country is 1, corresponding function becomes non-activation. After changing Service Operator, a warning window saying that channel map will be deleted when OK button is pressed or Close is selected, and a Auto-tuning pop-up window appears when ‘YES’ is selected. • Press the MENU/EXIT button to return to normal TV viewing. • Press the BACK button to move to the previous menu screen. OKMove ● Auto Tuning● Manual Tuning● Programme Edit● CI Information ● Cable DTV Setting SETUP ● Cable DTV Setting OKMove ● Auto Tuning● Manual Tuning● Programme Edit● CI Information ● Cable DTV Setting SETUP ● Cable DTV Setting 1Select SETUP. 2Select Cable DTV Setting. 3Select Service Operator or Channel Auto Update. 4Select your desired Source. ► ◄ Comhem ► Channel Auto Update Service Operator Off Close • If you select Cable, you can see Cable DTV Setting menu. • When Channel Auto Update is On, you can update information for all the pro- grammes that can be updated, including the programme currently being watched. • When Channel Auto Update is Off, you can only update information for the pro- gramme currently being watched.
26 WATCHING TV / PROGRAMME CONTROL WATCHING TV / PROGRAMME CONTROL OKMove ● Auto Tuning● Manual Tuning● Programme Edit● CI Information SETUP ● Manual Tuning MANUAL PROGRAMME TUNING Manual Tuning lets you manually add a programme to your programme list. • Press the MENU/EXIT button to return to normal TV viewing. • Press the BACK button to move to the previous menu screen. (IN DIGITAL MODE) 1Select SETUP. 2Select Manual Tuning. 3 Select DTV. 4 Select the desired channel number. 5Select update or add if signal present. OKMove ● Auto Tuning● Manual Tuning● Programme Edit● CI Information SETUP ● Manual TuningFrequency(kHz) 474000 ◄ DTV ► UHF CH.30 Close Add ● Signal Strength 50% ● Signal Quality 50% If you want to select the Antenna, • Use NUMBER buttons to input a 4-digit password in Lock System ‘On’. • You can select SBAND when the country is set to "Norway, Latvia." ►►
27 WATCHING TV / PROGRAMME CONTROL OKMove ● Auto Tuning● Manual Tuning● Programme Edit● CI Information ● Cable DTV Setting SETUP ● Manual Tuning • Press the MENU/EXIT button to return to normal TV viewing. • Press the BACK button to move to the previous menu screen. 1Select SETUP. 2Select Manual Tuning. 3 Select Cable DTV. OKMove ● Auto Tuning● Manual Tuning● Programme Edit● CI Information ● Cable DTV Setting SETUP ● Manual Tuning If you want to select the Cable, ◄ Cable DTV ► Frequency(kHz)362000Symbol rate(kS/s)6875Modulation64QAM Close Add ● Signal Strength 50% ● Signal Quality 50% • Use NUMBER buttons to input a 4-digit password in Lock System ‘On’. • Symbol rate : Enter a user-defined symbol rate (Symbol rate: Speed at which a device such as modem sends symbols to a channel). • Modulation : Enter a user-defined modulation. (Modulation: Loading of audio or video signals onto carrier). ►► Make appropriate adjustments.4
28 WATCHING TV / PROGRAMME CONTROL WATCHING TV / PROGRAMME CONTROL MANUAL PROGRAMME TUNING (IN ANALOGUE MODE) Manual Tuning lets you manually tune and arrange the stations in whatever order you desire. • Press the MENU/EXIT button to return to normal TV viewing. • Press the BACK button to move to the previous menu screen. • Use NUMBER buttons to input a 4-digit password in Lock System ‘On’. • L : SECAM L/L’ (France) BG : PAL B/G, SECAM B/G (Europe / East Europe / Asia / New Zealand / M.East / Africa) I : PAL I (U.K. / Ireland / Hong Kong / South Africa) DK : PAL D/K, SECAM D/K (East Europe / China / Africa / CIS) • To store another channel, repeat steps 4 to 9. 1Select SETUP. 2Select Manual Tuning. 3 Select TV or Cable TV. 4or Select the desired programme number on. 5Select a TV system. 6Select V/UHF or Cable. or7Select the desired channel number. 8Commence searching. 9Select Store. ● Storage ◄ Cable TV ► 3● SystemBG● BandV/UHF● Channel ◄ ► ◄ ► ● Fine ● Search 0 ● NameC 02 Close Store OKMove ● Auto Tuning● Manual Tuning● Programme Edit● CI Information SETUP ● Manual Tuning● Storage ◄ TV ► 3● SystemBG● BandV/UHF● Channel ◄ ► ◄ ► ● Fine ● Search 0 ● NameC 02 Close Store OKMove ● Auto Tuning● Manual Tuning● Programme Edit● CI Information SETUP ● Manual Tuning or ►►
29 WATCHING TV / PROGRAMME CONTROL You can assign a station name with five characters to each programme number. ■Assigning a station name • Press the MENU/EXIT button to return to normal TV viewing. • Press the BACK button to move to the previous menu screen. 1Select SETUP. 2Select Manual Tuning. 3 Select TV or Cable TV. 4Select Name. 5 Select the position and make your choice of the second character, and so on. You can use an the alphabet A to Z, the number 0 to 9, +/ -, and blank. 6Select Close. 7Select Store. Normally fine tuning is only necessary if reception is poor. ■Fine Tuning Select Fine.Select SETUP. Select Manual Tuning. Select Store.6 Fine tune for the best picture and sound. 1 2 Select TV or Cable TV.3 4 5 OKMove ● Auto Tuning● Manual Tuning● Programme Edit● CI Information SETUP ● Manual Tuning● Storage ◄ TV ► 3● SystemBG● BandV/UHF● Channel ◄ ► ◄ ► ● Fine ● Search 0 ● NameC 02 Close Store OKMove ● Auto Tuning● Manual Tuning● Programme Edit● CI Information SETUP ● Manual Tuning● Storage ◄ Cable TV ► 3● SystemBG● BandV/UHF● Channel ◄ ► ◄ ► ● Fine ● Search 0 ● NameC 02 Close Store or ►►
30 WATCHING TV / PROGRAMME CONTROL WATCHING TV / PROGRAMME CONTROL PROGRAMME EDIT When a programme number is skipped, it means that you will be unable to select it using P button during TV viewing. If you wish to select the skipped programme, directly enter the programme number with the NUMBER buttons or select it in the Programme edit menu. This function enables you to skip the stored programmes. You can change the programme number using “Move”function, if “Automatic Numbering” is unchecked when you start Auto Tuning. • Press the MENU/EXIT button to return to normal TV viewing. • Press the BACK button to move to the previous menu screen. 1Select SETUP. 2Select Programme Edit. 3Enter the Programme Edit. 4Select a programme to be stored or skipped. OKMove ● Auto Tuning ● Manual Tuning● Programme Edit● CI Information SETUP ● Manual Tuning● Manual Tuning● Manual Tuning● Manual Tuning● Programme Edit Previous Page ChangePBlock/UnblockSkip Pr. Change DTVRADIOTV 800 YLE TV1 803 YLE24 806 Kanal Lokal 809 TV4 Plus 812 TV4 Fakta 815 Demo 818 24H TVE 801 YLE TV2 804 YLE Teema 807 CNN 802 YLE FST 805 TV4 Stockholm 808 TV4 810 TV400 813 MediaCorp HD5 811 TV4 Film 814 SNY_SSU 816 TVE 1817 TVE 2 819 CLAN/50 TVE820 LA7 Page 1/2Programme EditFavourite Group : A ▼ Favourite Pr. GroupQ.MENUFavourite Pr.FAV Previous Page ChangePBlock/UnblockSkip Pr. Change Cable DTVCable RadioCable TV 800 YLE TV1 803 YLE24 806 Kanal Lokal 809 TV4 Plus 812 TV4 Fakta 815 Demo 818 24H TVE 801 YLE TV2 804 YLE Teema 807 CNN 802 YLE FST 805 TV4 Stockholm 808 TV4 810 TV400 813 MediaCorp HD5 811 TV4 Film 814 SNY_SSU 816 TVE 1817 TVE 2 819 CLAN/50 TVE820 LA7 Page 1/2Programme EditFavourite Group : A ▼ Favourite Pr. GroupQ.MENUFavourite Pr.FAV or ►►
31 WATCHING TV / PROGRAMME CONTROL This function enables you to delete or skip the stored programmes. You can also move some channels and use other programme numbers. ■Skipping a programme number IN TV MODE ■Deleting a programme ■Moving a programme IN DTV/RADIO MODE • When programmes are to be skipped, the skipped programme shows in blue and these programmes will not be selected by the P buttons during TV viewing. • If you wish to select a skipped programme, directly enter the programme number with the NUMBER buttons or select it in the programme edit or EPG. • The selected programme is deleted, all the following programmes are shifted up one 1Select a programme number to be skipped. 2 BLUETurn the programme number to blue. 3 BLUERelease. 1Select a programme number to be deleted. 2 REDTurn the programme number to red. 1Select a programme number to be moved. 2GREENTurn the programme number to green. 3 GREENRelease. ■Locking a programme number 1Select a programme number to be locked. 2 YELLOWTurn the programme number to yellow. 3 YELLOWRelease. • It can be registered as Lock programme even when Lock System is turned Off.
32 WATCHING TV / PROGRAMME CONTROL WATCHING TV / PROGRAMME CONTROL ■Auto Sort• After activating Auto Sort once, you can no longer edit programmes.1Start Auto Sort. ■Skipping a programme number• When a programme number is skipped it means that you will be unable to select it using the P button during normal TV viewing. • If you wish to select a skipped programme, directly enter the programme number with the NUMBER buttons or select it in the programme edit or EPG. 1Select a programme number to be skipped. 2 BLUETurn the programme number to blue. 3 BLUERelease. ■Selecting favourite programme 1Select your desired programme. 2Add corresponding programme to Favourite list of current Favourite group. 3Release. Favourite programmes is a convenient feature that lets you quickly scan up to programmes of your choice without having to wait for the TV to scan through all the in-between programmes. ■Locking a programme number 1Select a programme number to be locked. 2 YELLOWTurn the programme number to yellow. 3 YELLOWRelease. • It can be registered as Lock programme even when Lock System is turned Off.