LG 60ld550 Owners Manual

							
113
SOUND  &  LANGUAGE  CONTROL
DTV AUDIO SETTING (IN DIGITAL MODE ONLY)
When different audio types exist in an input signal, this function allows you to select the audio type 
you want. 
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
•   Auto: Automatically outputs in the order HE-AAC > Dolby Digital+ > Dolby Digital > MPEG. 
    (Except for Italy)
   Auto: Automatically outputs in the order HE-AAC > Dolby Digital+ > MPEG > Dolby Digital. 
(Only Italy)
•   HE-AAC, Dolby Digital+, Dolby Digital, MPEG: Allows users to select the audio type they want. 
  ex) If MPEG is selected, MPEG is always outputted. 
         If MPEG is not supported, another audio type is set in that order.
•  Refer to p. 120 to 121 (Audio Language Selection)
1Select AUDIO.
2Select DTV Audio Setting.
3Select Auto, HE-AAC, Dolby Digital +, Dolby 
Digital or MPEG.
OKMove
● Sound Mode   : Standard
  • Infinite Sound : Off
 • Treble   50
 • Bass   50
 • Reset
● Digital Audio Out  : PCM
● TV Speaker  : On
● DTV Audio Setting  : Auto
AUDIO
● DTV Audio Setting  : Auto
OKMove
● Sound Mode  : Standard
  • Infinite Sound : Off
 • Treble   50
 • Bass   50
 • Reset
● Digital Audio Out  : PCM
● TV Speaker  : On
● DTV Audio Setting  : Auto
AUDIO
● DTV Audio Setting  : Auto
Auto
HE-AACDolby Digital+Dolby DigitalMPEG
Auto
►
►
   
						

							
114
SOUND & LANGUAGE CONTROL
SOUND  &  LANGUAGE  CONTROL
SELECTING DIGITAL AUDIO OUT
This function allows you to select your preferred Digital Audio Output.
When Dolby Digital is available, selecting Auto in the Digital Audio Out menu will set SPDIF(Sony 
Philips Digital InterFace) output to Dolby Digital. 
If Auto is selected in the digital audio out menu when Dolby Digital is not available, SPDIF output will 
be PCM(Pulse-code modulation).
Even if both Dolby Digital and Audio language have been set in a channel which broadcast Dolby 
Digital Audio, only Dolby Digital will be played.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
ItemAudio InputDigital Audio output
Auto(Speaker On)MPEGDolby DigitalDolby Digital PlusHE-AAC
PCMDolby DigitalDolby DigitalPCM
Auto(Speaker Off)
MPEGDolby DigitalDolby Digital PlusHE-AAC
PCMDolby DigitalDolby DigitalDolby Digital
PCMAllPCM
1Select AUDIO.
2Select Digital Audio Out.
3Select Auto or PCM.
Manufactured under license from 
Dolby Laboratories. Dolby and the 
double-D symbol are trademarks of 
Dolby Laboratories.
•  There is a possibility that when HDMI mode, 
some DVD players do not make SPDIF sound. 
At that time, set the output of the digital audio of 
the DVD player to PCM. (In HDMI, Dolby Digital 
Plus is not supported).
OKMove
● Sound Mode   : Standard
  • Infinite Sound : Off
 • Treble   50
 • Bass   50
 • Reset
● Digital Audio Out  : PCM
● TV Speaker  : On
● DTV Audio Setting  : Auto
AUDIO
● Digital Audio Out  : PCM
OKMove
● Sound Mode  : Standard
  • Infinite Sound : Off
 • Treble   50
 • Bass   50
 • Reset
● Digital Audio Out  : PCM
● TV Speaker  : On
● DTV Audio Setting  : Auto
AUDIO
● Digital Audio Out  : PCMAuto
PCMPCM
►►►
   
						

							
115
SOUND  &  LANGUAGE  CONTROL
Settings of the selected Sound Mode return to the default factory settings.
AUDIO RESET
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
OKMove
● Sound Mode  : Standard
  • Infinite Sound : Off
 • Treble   50
 • Bass   50
 • Reset
● Digital Audio Out  : PCM
● TV Speaker  : On
● DTV Audio Setting  : Auto
AUDIO
  • Reset
OKMove
● Sound Mode  : Standard
  • Infinite Sound : Off
 • Treble   50
 • Bass   50
 • Reset
● Digital Audio Out  : PCM
● TV Speaker  : On
● DTV Audio Setting  : Auto
AUDIO
  • Reset►►
          All audio settings will be resetted.
          Continue?
YesNo
?
1Select AUDIO.
2Select Reset.
3Select Yes.
4Initialize the adjusted value.
   
						

							
116
SOUND & LANGUAGE CONTROL
SOUND  &  LANGUAGE  CONTROL
AUDIO DESCRIPTION (IN DIGITAL MODE ONLY)
This function is for the blind, and provides explanatory audio describing the current situation in a TV 
programme in addition to the basic audio.
When Audio Description On is selected, basic audio and Audio Description are provided only for those 
programmes that have Audio Description included.
Volume Changes the Audio Description volume
Beep Beeps when a programme with Audio Description information is selected
Adjustment for Audio Description Volume With selecting On
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
1Select OPTION.
2Select Disability Assistance.
3Select Audio Description.
4Select Volume or Beep.
5
Make desired adjustment.
OKMove
● Language(Language)● Country   : UK● Disability Assistance● Power Indicator● Factory Reset● Set ID  : 1● Mode Setting  : Home Use
OPTION
● Disability Assistance
OKMove
● Language(Language)● Country  : UK● Disability Assistance● Power Indicator● Factory Reset● Set ID  : 1● Mode Setting  : Home Use
OPTION
● Disability Assistance
Close
• Volume                0
Hard of Hearing(   )
• Beep 
 Off     
 Off     
-+
Audio Description◄      On      ►►►
   
						

							
117
SOUND  &  LANGUAGE  CONTROL
 I/II
 ■ Mono sound selection
If the stereo signal is weak in stereo reception, you can switch to mono. In mono reception, the 
clarity of sound is improved.
 ■Language selection for dual language broadcast
If a programme can be received in two languages (dual language), you can switch to DUAL I, 
DUAL II or DUAL I+II.
 DUAL I   Sends the primary broadcast language to the loudspeakers.
 DUAL II   Sends the secondary broadcast language to the loudspeakers.
 DUAL I+II Sends a separate language to each loudspeaker.
STEREO/DUAL RECEPTION (IN ANALOGUE MODE ONLY)
When a programme is selected, the sound information for the station appears with the programme 
number and station name.
BroadcastOn Screen Display
MonoMONO
StereoSTEREO
DualDUAL I, DUAL II, DUAL I+II
1Select Audio or Audio Language. 
2Select the sound output.
   
						

							
118
SOUND & LANGUAGE CONTROL
SOUND  &  LANGUAGE  CONTROL
NICAM RECEPTION (IN ANALOGUE MODE ONLY)
If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous 
Companding Audio Multiplex) digital sound can be received.
Sound output can be selected according to the type of broadcast received.
SPEAKER SOUND OUTPUT SELECTION
In AV, Component, RGB and HDMI mode, you can select output sound for the left and 
right loudspeakers.
Select the sound output.
L+R:  Audio signal from audio L input is sent to the left loudspeaker and audio signal from 
audio R input is sent to the right loudspeaker.
L+L:  Audio signal from audio L input is sent to left and right loudspeakers.
R+R:  Audio signal from audio R input is sent to left and right loudspeakers.
1When NICAM mono is received, you can select NICAM MONO or FM MONO.
2When NICAM stereo is received, you can select NICAM STEREO or FM MONO. 
If the stereo signal is weak, switch to FM MONO.
3When NICAM dual is received, you can select NICAM DUAL I, NICAM DUAL II or 
NICAM DUAL I+II or FM MONO.
    
   
						

							
119
SOUND  &  LANGUAGE  CONTROL
ON-SCREEN MENU LANGUAGE / COUNTRY 
SELECTION
The installation guide menu appears on the TV screen when it is switched on for the first time.
* If you want to change Language/ Country selection
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
NOTE
 ►If you do not finish the set-up Installation Guide by pressing BACK or if you time out on the OSD (On 
Screen Display) the installation menu will continuously appear until the set up is completed whenever the 
TV is switched on.
 ►If you select the wrong local country, teletext may not appear correctly on the screen and some problems 
may occur during teletext operation.
 ►The CI (Common Interface) function may not be applied based on country broadcasting circumstances.
 ►DTV mode control buttons may not function based on country broadcasting circumstances.
 ► In country that Digital broadcasting regulation isn’t fixed, some DTV function may not work depending on 
digital broadcasting circumstances.
 ►The Country Setting "UK" should only be activated in UK.
 ►If the country setting is set to "--", European terrestrial digital standard broadcasting programmes are avail-
able, but some DTV functions may not work properly.
1Select your desired language.
2
Select your country.
1Select OPTION.
2Select Language(Language).
3Select Menu Language.
4Select your desired language. 
5Save.
1Select OPTION.
2Select Country.
3Select your country. 
4Select Yes or No.
5Save.
   
						

							
120
SOUND & LANGUAGE CONTROL
SOUND  &  LANGUAGE  CONTROL
120
The Audio function allows selection of a preferred language.
If audio data in a selected language is not broadcast, the default language audio will be played.
Use the Subtitle function when two or more subtitle languages are broadcast. If subtitle data in a 
selected language is not broadcast, the default language subtitle will be displayed.
When the languages you selected as the primary for Audio Language and Subtitle Language and Text 
Language are not supported, you can select language in secondary category. 
In Digital mode, use the Text language function when two or more Text languages are broadcast. If tele-
text data in a selected language is not broadcast, the default Text language page will be displayed.
• Press the BACK button to move to the previous menu screen.
LANGUAGE SELECTION
1Select OPTION.
2Select Language(Language).
3Select Audio Language, Subtitle 
Language or Text Language(Except 
for UK).
4Select your desired language. 
5Save.
1Select OPTION.
2Select Disability Assistance.
3
Select Hard of Hearing(    ). 
4
Select On or Off.
   
						

							
121
SOUND  &  LANGUAGE  CONTROL
< Audio Language Selection >
 ►When two or more audio languages are broadcast, you can 
select the audio language.
-  The audio/subtitles can be displayed in a simpler form with 1 to 3 characters broadcast by the service pro-
vider.
-  When  you  select  supplementary Audio  (Audio  for  “Visual/Hearing  Impaired”)  the  TV  may  output  a  part  of 
the Main audio.
< Subtitle Language Selection >
 ►When two or more subtitle languages are broadcast, you 
can select the subtitle language with the SUBTITLE button 
on the remote control.
 ► Press the        button to select a subtitle language.
Subtitle Language OSD Information
Audio Language OSD Information
DisplayStatus
N.ANot Available
MPEG Audio
Dolby Digital Audio
Audio for “Visual Impaired”
Audio for “Hearing Impaired”
Dolby Digital Plus Audio
HE-AAC Audio
DisplayStatus
N.ANot Available
Teletext Subtitle
 Subtitle for “Hard of Hearing”
1Select Audio or Audio Language.
     Select an audio language.2
HE-AAC
   
						

							
122
CLOCK SETUP
TIME SETTING
The clock is set automatically when receiving a digital signal in Auto mode. You can set the clock 
manually in  Manual mode.
You must set the time correctly before using on/off timer function.
The TV time is set by the time offset information based on Time Zone and GMT (Greenwich Mean 
Time) which is received with the broadcast signal and the time is set au\
tomatically by a digital signal.
When if the city name in  Time Zone is changed into offset, you can change time by 1 hour.
Time Zone  menu can be changed in  Auto mode.
• Press the  MENU/EXIT  button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
1Select TIME.
2Select  Clock.
3Select  Auto or Manual .
4Select either the year, month, date, 
time or Time Zone option.
5Set the year, month, date, time or Time 
Zone option.
TIME SETTING
OK
Move
●
 Clock
● Off Time  : Off
● On Time  : Off
● Sleep Timer  : Off
TIME
● Clock● Clock
● Off Time  : Off
● On Time  : Off
● Sleep Timer  : Off
TIME
● Clock►OK
Move
Date3
MonthMar.
Year2008
Hour16
Minute09
Time ZoneLondon
Close
◄
  Auto  ►
OK
Move
GMT
This Table means the Time Zone table of 9 
area of Russia, and when the user selects the 
Time Zone for his or her area, it automatically 
sets the time for the corresponding area.
However, even though the user selected his or 
her area, if the broadcasting station’s local 
time offset is not offered, or if the region infor-
mation does not match, then the user may 
select the Offset from the Time Zone to set the 
correct time.
Time Zone
Magadan, Kamchatka
Vladivostok
Yakutsk
Irkutsk
Krasnoyarsk
Omsk 
Yekaterinburg
Moscow, Samara
Kaliningrad