LG 55lw575s Owners Manual

							41
ENGENGLISH
WATCHING TV
Using additional options
Adjusting aspect ratio
Resize an image to view at its optimal size by 
pressing RATIO while you are w atching TV.
 yYou can also change the image size by 
pressing  Q. MENU or accessing Aspect 
Ratio in the PICTURE menus.
 y You can adjust t he enlarge proportion 
using the Navigation buttons .
 yYou can only select  4:3, 16:9 (Wide), 
14:9, Cinema Zoom in Component 
mode.
 y You can only select  4:3, Original, 16:9 
(Wide), 14:9, Cinema Zoom in HDMI 
mode.
 y You can only select  4:3, 16:9 (Wide) in 
RGB-PC, HDMI-PC mode only.
 y In DTV/HDMI/Component (over 720p) 
mode, Just Scan is available.
 yIn Analogue/DTV/AV/Scart mode, Full 
Wide is available.
NOTE
-  16:9: Resizes images to fit the screen width.
-  Just Scan: Displays video images in the origi-
nal size without removing parts  of the edge of 
the image .
 yIf you select Just Scan, you may see 
image noises at the edge  or edges of the 
screen.
NOTE
 Just Scan
-  4:3: Resizes images  to the previous standard 
4:3.
- Full Wide: When TV receives the wide 
screen signal,  it will let you adjust the 
picture horizontally or vertically, in a linear 
proportion,to fill the entire screen fully. 
 4:3 and 14:9 video is supported in full screen 
without any video distortion through DTV 
input.
-  Original : When your TV receives a wide 
screen signal it will automatically change to the 
picture format  broadcasted .
Original 
Full Wide
  
						

							42
ENGENGLISH
WATCHING TV
Changing AV modes
Each AV mode has optimized image and sound 
settings. 
Press AV MODE repeatedly to select an 
appropriate mode.
Mode Description 
Off  Changes to the previously customized 
settings.
Cinema Use the optimized image and sound 
settings for the cinematic look.
Game  Use the optimized image and sound 
settings for fast gaming.
When playing a video game using 
PlayStation or Xbox, it is recommended
to use the Game mode.
When in Game mode, functions related 
to picture quality will be optimized
for playing games.
- 14:9 : You can view a picture format of 14:9 
or a general TV programme in the 14:9 mode. 
The 14:9 screen is viewed in the same way as 
in 4:3, but is moved to the up and down.
-  Cinema Zoom: Choose Cinema Zoom when 
you want to enlarge the picture in correct pro -
portion.
 y To change the ratio of the cinema zoom, 
press 
< > and its range is from 1 to 16.
 yTo move the zoom focus up or down, press 
^ v.
 y
If you enlarge or reduce an image, the 
image may be distorted.
NOTE
  
						

							43
ENGENGLISH
WATCHING TV
The disconnected input sources will be gray.
- To add an input label, press the Green button. 
You can easily identify a device connected to 
each input source.
- If you connect a new external device to the 
TV, a pop-up window appears. Select  Yes on 
the pop-up window  to select an input source.
- To access the SIMPLINK, press the Red 
button. If you select “SIMPLINK and On”, the 
pop-up window for the HDMI input will not 
display.
Using the input list
Selecting an input source
1 Press INPUT to access the input sources.
- The connected device displays  on each input 
source.
2 Press the Navigation buttons to scroll to one of 
the input sources and press OK.
 yYou can also access the input source list by 
selecting  INPUT in the Home menu .
 NOTE
Input source Description
Antenna or 
Cable or 
Satellite Watch TV over the air, cable, and 
digital cable broadcast.
USB Play media files from a thumb drive.
NETWORK Play media files from your home net -
work.
AV Watch video from a VCR or other 
external devices.
Component Watch video from a DVD or other 
external devices, or through a digital 
set-top box.
RGB Use the TV as a computer monitor.
HDMI Watch video from a HTS or other high 
definition devices.
AntennaUSB 1
Input List
Input LabelExit
AV1NETWORKAV2
Component1
▼
▼
SIMPLINK
Page 1/2
HDMI2HDMI3HDMI1Component2RGB
USB 2
  
						

							44
ENGENGLISH
WATCHING TV
Using the quick menu
Customize frequently used menus.
1 Press Q. MENU to access the quick menus.
2 Press Navigation buttons to scroll through the 
following menus and press  OK.
MenuDescription
Aspect Ratio Changes the image size (16:9, Just 
Scan, Original, Full Wide, 4:3, 14:9, 
Cinema Zoom)
Picture Mode Changes the image mode (Intelligent 
Sensor, Vivid, Standard, Cinema , 
Game, Expert1, Expert2)
Sound Mode Changes the sound mode (Standard, 
Music, Cinema, Sport, Game)
Sleep Timer Sets the length of time until the TV to 
turns off
Subtitle 
Language Recalls your preferred subtitle in 
digital mode.
Audio  or
Audio 
Language Changes the sound output.
Audio 
Description Switches the Audio Description On or 
Off.
Energy Saving Reduces the power consumption by 
adjusting the screen brightness.  (Auto, 
Off, Minimum, Medium, Maximum, 
Screen Off)
AV Mode Sets the optimized image and sound 
settings (Off, Cinema, Game)
Skip Off/On Sets the Skip Off/On.
MULTIFEED 
(Only Satellite 
models) Select video from List for a Multifeed 
Service.
USB Device Eject a USB device.
The menu is displayed only when the 
USB device is connected.
 yThe available menus and options may 
differ from the input source that you are 
using.
NOTE
3 Press Navigation buttons to scroll to the option 
you want.
4 When you are finished, press Q. MENU.
Adding an Input label
Add a label to an input source so that you can 
easily identify a device connected to each input 
source.
Input Label
AV1
AV2
Component1
Component2
RGB
Close
▼
▼
◄►
◄►
◄►
◄►
◄►
1 Press INPUT to access the input sources.
2 Press Green button.
3 Press the Navigation buttons to scroll to one of 
the input sources.
4 Press the Navigation buttons to scroll to one of 
the input labels.
5 When you are finished, press EXIT.
 When you return to the previous menu, press 
BACK.
Page 1/2
  
						

							45
ENGENGLISH
ENTERTAINMENT
ENTERTAINMENT
Network Connection
Connecting to a wired network
Connect the TV to a local area network (LAN) via 
the LAN port as shown in the following illustration 
and set up the network settings.
If wired and wireless networks are both available, 
wired is the preferred method.
After making a physical connection, a small 
number of home networks may require the TV 
network settings to be adjusted. For most home 
networks, the TV will connect to automatically 
without any adjustments.
For detail information, contact your internet pro-
vider or router manual.
To set up the network settings: (Even if your TV 
has already connected automatically, running 
setup again will not harm anything) ,
1 Press Home to access the Home menu.
2 Press the Navigation buttons to scroll to 
SETUP and press OK.
3 Press the Navigation buttons to scroll to NET-
WORK and press OK.
4 Press the Navigation buttons to select Net-
work Setting  and press OK.
5 If wired and wireless are simu ltaneously con-
nected, press the Navigation buttons to select 
Wired and press OK.
6 If you have already set the Network Setting, 
select Resetting. The new connection settings 
will  reset the current network settings. 
7 Select IP Auto Setting  or IP Manual Setting .
- If selecting IP Manual Setting, press the 
Navigation and Number buttons. IP address -
es will need to be input manually.
- IP Auto Setting : Select this if there is a 
DHCP server (Router)  on the local area 
network (LAN) via wired connection, the TV 
will automatically be allocated an IP address. 
If you’re using a broadband router or broad -
band modem that has a DHCP (Dynamic 
Host Configuration Protocol) server function. 
The IP address will automatically be deter -
mined.
- IP Manual Setting : Select if there is no 
DHCP server on the network  or you want to 
set the IP address manually.
8 When you are finished, press EXIT.
 y Do not connect a modular phone cable to 
the LAN port.
 ySince there are various connection 
methods, please follow the specifica -
tions of your telecommunication carrier or 
internet service provider.
 y After connecting the LAN port, use the 
Premium or LG  Apps menu.
CAUTION
  
						

							46
ENGENGLISH
ENTERTAINMENT
Connecting to a wireless network
The LG Wireless LAN for Broadband/DLNA Adap-
tor, which is sold separately, allows the TV to con-
nect to a wireless LAN network. 
The network configuration and connection method 
may vary depending on the equipment in use 
and the network environment. Refer to the setup 
instructions supplied with your access point or 
wireless router for detailed connection steps and 
network settings.
Setting up the AP (Access Point) or the wireless 
router is required before connecting the TV to the 
network. The easiest method is the WPS button 
method (Third method in this section). 
(Only 47/55LW95** : Built-in the Wi-Fi Module, 
Unnecessary Wireless LAN for Broadband/DLNA 
adaptor setup) y If you want to access the Internet directly 
on your TV, the broadband internet con -
nection should always be on.
 y If you cannot access the Internet, check 
the network conditions from a PC on your 
network. 
 yWhen you use Network Setting, check 
the LAN cable or chec k if DHCP in the 
router is turned  on.
 yIf you do not complete the network set-
tings, the network may not work properly.
NOTE
 yFor enjoying pictures, music, or video 
stored on a PC using the router, a wired 
connection  is recommended.
 yWhen the wireless port of the router is 
used, there may be restrictions  on some 
functions.
 y It is recommended that an Access Point 
(AP) be located  more than 1 m away from 
the TV. If the AP is installed closer than 1 
m, the magic motion remote control may 
not perform as expected due to frequency 
interference.
NOTE
  
						

							47
ENGENGLISH
ENTERTAINMENT
To set up the network settings,
1 Press Home to access the Home menu.
2 Press the Navigation buttons to scroll to 
SETUP and press OK.
3 Press the Navigation buttons to scroll to NET-
WORK and press OK.
4 Press the Navigation buttons to select Net-
work Setting  and press OK.
5 Press the Navigation buttons to select Wire-
less and press OK.
6 If you already set Network Setting, select Re-
setting and press OK.
The new connection settings resets the current 
network settings. 
7 Press the Navigation buttons to select Setting 
from the AP list  and press OK.
- Scan the all available AP  (Access Point) or 
wireless routers within range and display 
them as a list. 
Selecting the wireless network setting type
Select the wireless network setting type.
Setting from the AP list
Simple setting (WPS-button mode) Setting Ad-hoc network
  Previous Exit
 Next
8 Press the Navigation buttons to select an  AP 
(Access Point) or wireless router on the list. (If 
your AP is secured, you will prompted for the 
key.) And press OK.
9 Press the Number buttons to Input the security 
key of AP and press OK. 
Selecting AP
  Previous Exit
Select AP you want to connect.Page 1/1
Input the new SSID
iptime
ASW
Network1
 PIN Connect
Access Point
Searching...
  
						

							48
ENGENGLISH
ENTERTAINMENT
When a security code is already 
set
PIN (Personal Identification Number)
If your router is set to use a PIN, use the following 
instructions.
1 Repeat step 1-7 on “Connecting to a wireless 
network”.
2 Press Red button to connect the access point 
with PIN mode.
3 You can see the Network ID and Security Key 
on your TV screen. 
Enter the PIN number to your device. 
PIN number is the unique 8 digit number of the 
dongle.
4 Press OK to select Connect.
Connecting with PIN mode
Insert PIN number at the AP webpage and press [Connect] button.
PIN NUMBER : 12345670
Connect
  Previous
 For more information, check the AP manual.
 Exit
 Next
5 Repeat step 6-7 on “Connecting to a wired 
network”.
WPS (Wi-Fi Protected Setup)
If your router or AP has a WPS button, it is the 
easiest connection method. You simply press the 
button on the router and then select the WPS on 
the TV within 120 seconds.  
1 Repeat step 1-7 on “Connecting to a wireless 
network”.
2 Press the Navigation buttons to select the 
Simple setting (WPS-button mode) .
3 Press the WPS button on your router. 
4 Go back to the TV and select Connect.
5 Repeat step 6-7 on “Connecting to a wired 
network”.
  
						

							49
ENGENGLISH
ENTERTAINMENT
Ad-hoc Mode
Ad-hoc mode allows the TV to use a  wireless to 
connect to a computer without using a router or 
access point.
1 Repeat step 1-5 on “Connecting to a wireless 
network”.
2 Press the Navigation buttons to select Setting 
Ad-hoc network and press OK.
3 Press the Navigation buttons to select OK and 
press OK.
4 Press OK to select Connect to connect Ad-hoc 
network. 
- You can see the Network ID and Security Key 
on your TV screen. 
- Enter this Network ID and Security Key to 
your device.
- When needed, you can  change the setting 
information using the Red button.
5 Press the Navigation buttons to type in an IP 
address and press  OK.
Option Description
PC Setting
 y Internet Protocol(TCP/IP) of PC 
needs to be set manually. IP ad-
dress, Subnet Mask, and default 
Gateway can be set with your own 
discretion. 
 » e.g.) IP address: 192.168.0.1 / Subnet Mask: 255.255.255.0 / 
default Gateway: 192.168.0.10
TV Setting
 y Verify IP address and gateway of 
PC. Input Gateway address of PC 
to IP Address, and IP Address of 
PC to Gateway, and select OK.
 » e.g.) IP address: 192.168.0.10 / Subnet Mask: 255.255.255.0 
/ default Gateway: 192.168.0.1
6 Press the Navigation buttons to select Close 
after Network setting is completed.
7 Press the OK.
When searching for wireless networks on your 
PC using ad-hoc, the TV is named LGTV10. 
 y LGTV10 that appears in the list. (Select 
the same name as the network ID that ap -
pears on your TV screen.)
NOTE
  
						

							50
ENGENGLISH
ENTERTAINMENT
Tips for Network setting
 yUse a standard LAN  cable with this TV. Cat5 or 
better with a RJ45 connector.
 y Many network connection problems during set 
up can often be fixed by re-setting the router or 
modem. After connecting the player to the home 
network, quickly power off and/or disconnect the 
power cable of the home network router or cable 
modem. Then power on and/or connect the 
power cable again.
 yDepending on the internet service provider 
(ISP), the number of devices that can receive 
internet service may be limited by the applicable 
terms of service. For details, contact your ISP.
 yLG is not responsible for any malfunction of the 
TV and/or the internet connection feature due 
to communication errors/malfunctions associ -
ated with your broadband internet connection, or 
other connected equipment.
 y LG is not responsible for problems within your 
internet connection.
 ySome content available through the network 
connection may not be compatible with the TV. If 
you have questions about such content, please 
contact the producer of the content.
 yYou may experience undesired results if the 
network connection speed does not meet the 
requirements of the content being accessed. 
 ySome internet connection operations may not 
be possible due to certain restrictions set by the 
Internet service provider (ISP) supplying your 
broadband Internet connection.
 yAny fees charged by an ISP including, without 
limitation, connection charges are your respon -
sibility.
 y A 10 Base-T or 100 Base-TX LAN port is re-
quired  when using a wired  connection to this TV. 
If your internet service does not allow for such a 
connection, you will not be able to connect the 
TV.
 y A DSL modem is required to use DSL service 
and a cable modem is required to use cable mo -
dem service. Depending on the access method 
of and subscriber agreement with your ISP, you 
may not be able to use the internet connection 
feature contained in this TV or you may be lim-
ited to the number of devices you can connect at 
the same time. (If your ISP limits sub-scription to 
one device, this TV may not be allowed to con -
nect when a PC is already connected.)
 y The use of a “Router” may not be allowed or its 
usage may be limited depending on the policies  and restrictions of your ISP. For details, contact 
your ISP directly.  
 y
The wireless network operates at 2.4 GHz 
radio frequencies that are also used by other 
household devices such as cordless telephone, 
Bluetooth® devices, microwave oven, and can 
be affected by interference from them. It can 
be interrupted by the device using 5 Ghz radio 
frequencies. It is same device with LG wire -
less media box, cordless telephone, other Wi-Fi 
device. 
 y It may decrease the service speed using Wire -
less network by surrounding wireless condition.
 y Turn off all unused network equipment in your 
local home network. Some devices may gener -
ate network traffic.
 y In some instances, placing the access point or 
wireless router higher up away from the floor 
may improve the reception.
 yThe reception quality over wireless depends on 
many factors such as type of the access point, 
distance between the TV and access point, and 
the location of the TV.
 yTo connect wireless AP, an AP that supports the 
wireless connection is necessary, and the wire-
less connection function of the AP needs to be 
activated. Please enquire to the AP supplier for 
the possibility of AP wireless connections.
 yPlease verify the security settings of AP SSID for 
wireless AP connection, and enquire to the AP 
supplier for the AP SSID security settings.
 yThe TV can become slower or malfunction with 
wrong settings of network equipments (wired/
wireless router, hub, etc). Please install correctly 
by referring to the manual of the equipment, and 
set the network.
 yWhen AP is set to include 802.11 n(Except 
for Russia), and if Encryption is designated 
as WEP(64/128bit) or WPA(TKIP/AES), the 
connection may not be possible. There may be 
different connection methods according to the 
AP manufacturers.