LG 55lw575s Owners Manual

							31
ENGENGLISH
WATCHING TV
Managing programmes
Selecting Antenna,
Use this to automatically find and store all available 
programmes.
When you start auto programming, all previously 
stored service information will be deleted.
1 Press Home to access the Home menu.
2 Press the Navigation buttons to scroll to 
SETUP and press OK.
3 Press the Navigation buttons to scroll to 
SETUP and press OK.
4 Press the Navigation buttons to scroll to 
Auto Tuning and press OK.
5 Press the Navigation buttons to scroll to 
Antenna and press OK.
6 Select Start to start automatic tuning.
The TV scans and saves available programmes 
automatically.
7 When you are finished, press EXIT.
When you return to the previous menu, press 
BACK .
NOTE
 yIf the TV scans a blocked programme, you 
will be prompted to enter your password to 
keep the programme scanned.
 y You can store up to 1,200 programmes ( Except 
for Satellite models) or  6,000 programmes(Only 
Satellite models) . The number of programmes 
that you can store differs depending on the 
broadcasting signal environment.
 y When select  Italy  in the Country menu, if the 
pop up is displayed when the conflicted pro -
gramme after Auto Tuning, select a broadcast -
er for conflicting programme number to solve.
 y When select UK in the Country menu, if the pop 
up is displayed when the conflicted programme 
after Auto Tuning, select a regions, country for 
conflicting programme number to solve.
 y When selected  Norway in the Country menu, 
If Network name is recognized more than two 
after Auto Tuning, you can select your desired 
one. Programme lists are arranged based 
on the selected Network name. (Only Nordic 
models)
 y In the following country, DVB cable can be used 
: Germany, Netherlands, Sweden, Switzerland, 
Denmark, Austria, Finland, Norway, Slovenia, 
Hungary, Ukraine, Bulgaria, Ireland, Poland, 
Romania, Russia, Lithuania, Estonia, Latvia, 
Spain. (The supported country can be added.)
Automatically setting up programme1 Press Home to access the Home menu .
2 Press the Navigation buttons to scroll to 
SETUP and press OK. 
3 Press the Navigation buttons to scroll to 
SETUP and press OK.
4 Press the Navigation buttons to scroll to 
Auto Tuning and press OK.
5 Press the Navigation buttons to scroll to 
Cable and press OK. 
6 Press the Navigation buttons to scroll to 
Service Operator  and press OK.
7 Press the Navigation buttons or Number but-
tons to scroll make appropriate adjustments 
and press OK.
8 Select Start to start automatic tuning.
The TV scans and saves available pro -
grammes automatically.
9 When you are finished, press EXIT.
When you return to the previous menu, press 
BACK .
Selecting Cable,
NOTE
 yIf the TV scans a blocked programme, you 
will be prompted to enter your password to 
keep the programme scanned.
 yUse this to automatically find and store all avail able programmes. When you start auto programming, all previously stored service 
information will be deleted.
 yWhen you select the Cable, the Cable 
Service Operator  selection screen can differ 
or not exist by the Cable situation of the ap -
plicable country.
 y The popup window to select  Service Opera-
tor is only shown initially for the 3 cases 
when you accessing the  Initial Setting 
menu, when you change from  Antenna to 
Cable or when you access the menu after 
changing the  Country.
 yWhen you want to select Service Operator 
aside from the above 3 cases, you can do so 
by selecting  Setup->Cable DTV Setting -> 
Service Operator .
  
						

							32
ENGENGLISH
WATCHING TV
 yAcquired certification SO : 
Sweden(Comhem, Canal Dig -
ital), Denmark(YouSee, Canal Dig -
ital, Stofa), Norway(Canal Digital), 
Netherlands(Ziggo,  UPC Digitaal), 
Ukraine(Volia-Cable), Germany(KDG), 
Switzerland(CableCom, UPC), 
Austria(UPC Digital), Hungary(UPC Dig -
ital), Ireland(UPC Digital), Poland(UPC 
Digital), Romania(UPC Digital), 
Russia( OnLime).
 yIf there are not any Service Operator 
that you want, select Other Operators.
 yIf you select “Other Operators”, or 
the selected country supports “ Other 
Operators” only, it may take some time 
to search all the channels, or it may not 
search some of the channels.
The following values are needed in order to 
search all available programmes quickly and 
correctly.
The commonly used values are provided as 
"default".
However, for correct settings, please inquire 
of the cable service provider.
When running  Auto Tuning in DVB cable 
mode, selecting Full will search through all 
frequencies to find available channels.
In the case when the programme is not 
searched by selecting the Default, perform the 
searching by selecting the Full.
However, in the case when the programme is 
searched by selecting the Full, the Auto Tun-
ing time can be taken too much.  • 
Frequency : Enter a user-defined fre-quency.
• Symbol rate : Enter a user-defined symbol  rate (Symbol rate: Speed at which a 
device such as modem sends symbols to 
a channel).
• Modulation  : Enter a user-defined modula -
tion. (Modulation: Loading of audio or 
video signals onto carrier).
• Network ID : Unique identifier allocated for  each user.
• Start Frequency : Enter a user-defined  start frequency range.
• End Frequency : Enter a user-defined end  frequency range.
1 Press Home to access the Home menu .
2 Press the Navigation buttons to scroll to 
SETUP and press OK. 
3 Press the Navigation buttons to scroll to 
SETUP and press OK.
4 Press the Navigation buttons to scroll to 
Auto Tuning and press OK.
5 Press the Navigation buttons to scroll to 
Satellite and press OK.
6 Press the Navigation buttons to scroll make 
appropriate adjustments and press  OK.
7 Select Start to start automatic tuning.
The TV scans and saves available pro -
grammes automatically.
8 When you are finished, press EXIT.
When you return to the previous menu, press 
BACK .
Selecting Satellite,
NOTE
 yProgramme Type : You can select  All 
Programmes, FTA Programme or Paid 
Programme .
 yNetwork Search  : You can search through 
both an existing  Transponder List  and the 
Transponder List  that was transmitted via 
NIT.
 y You can change the  Setting ID Info from the 
Setting menu.
 y You can Add/Delete the Setting ID from the 
SETUP -> Satellite DTV Setting  menu.
 yIf more than 6000 programmes are stored, 
you cannot store any more programmes. To 
add programmes, delete the unused setting 
IDs in SETUP -> Satellite DTV Setting  and 
tune the TV again.
(Only Satellite models)
  
						

							33
ENGENGLISH
WATCHING TV
1 Press Home to access the Home menu.
2 Press the Navigation buttons to scroll to 
SETUP and press OK. 
3 Press the Navigation buttons to scroll to 
SETUP and press OK.
4 Press the Navigation buttons to scroll to 
Auto Tuning and press OK.
5 Press the Navigation buttons to scroll to 
Antenna & Satellite and press OK.
6 Press the Navigation buttons  to scroll make ap-
propriate adjustments and press  OK.
7 Select Start to start automatic tuning.
The TV scans and saves available pro -
grammes automatically.
8 When you are finished, press EXIT.
When you return to the previous menu, press 
BACK .
Selecting Antenna & Satellite,
1 Press Home to access the Home menu .
2 Press the Navigation buttons to scroll to 
SETUP and press OK. 
3 Press the Navigation buttons to scroll to 
SETUP and press OK.
4 Press the Navigation buttons to scroll to 
Auto Tuning and press OK.
5 Press the Navigation buttons to scroll to 
Cable & Satellite and press OK.
6 Press the Navigation buttons to scroll to 
Service Operator  and press OK.
7 Press the Navigation buttons to  select your 
desired  cable setting  and press OK.
8 Press the Navigation buttons to  select your 
desired  satellite setting  and press OK.
9 Select Start to start automatic tuning.
The TV scans and saves available pro -
grammes automatically.
10 When you are finished, press EXIT.
When you return to the previous menu, press 
BACK .
Selecting Cable & Satellite,
(Only Satellite models) (Only Satellite models)
  
						

							34
ENGENGLISH
WATCHING TV
Cable DTV Setting
The range that a user can select from the Service 
Operator menu differs depending on number of 
Service Operator supported by each country, and 
if number of supported Service Operator for each 
country is 1, corresponding function becomes non-
activation.
1 Press Home to access the Home menu.
2 Press the Navigation buttons to scroll to 
SETUP and press OK. 
3 Press the Navigation buttons to scroll to 
SETUP and press OK.
4 Press the Navigation buttons to scroll to Cable 
DTV Setting and press OK.
5 Press the Navigation buttons to scroll to Serv-
ice Operator or Channel Auto update and 
press OK.
6 Select your desired Source.
7 When you are finished, press EXIT.
When you return to the previous menu, press 
BACK .
Satellite DTV Setting
You can add or delete a satellite setting ID.
1 Press Home to access the Home menu .
2 Press the Navigation buttons to scroll to 
SETUP and press OK. 
3 Press the Navigation buttons to scroll to 
SETUP and press OK.
4 Press the Navigation buttons to scroll to Satel-
lite DTV Setting  and press OK.
5 Select your desired  setting ID.
 You can change the following settings for each 
setting ID for your preferences.
(In Satellite, Antenna & Satellite, Cable & Satellite 
mode only-Only Satellite models)
(In Cable, Cable & Satellite(-Only Satellite models) 
mode only)
Option
Description
Satellite Select your desired Satellite.
LNB 
Frequency Select one value 
from Universal, 9750, 
10600, 5150.
If you select  Universal for LNB Frequency 
which is 9750/10600(MHz),  22KHz Tone 
is disabled.
If you cannot find the LNB frequency value 
from the list, select User and manually 
enter the frequency.
22KHz Tone When using 22KHz Tone switch, select A 
or B. If you use 22KHz Tone, Tone Burst 
and Motorized System are disabled.
Tone Burst When using Tone Burst switch, select  A 
or B. If you use Tone Burst, 22KHz Tone 
and Motorized System are disabled.
LNB Power To enable the power supply for the LNB, 
select On.
If you select Off, Motorized System is 
disabled.
DiSEqC When using DiSEqC, select one option 
from DiSEqC A~D. If you use DiSEqC, 
Motorized System is disabled.
Motorized 
System When using the motor, select On. To set 
the antenna position, press 
OK button 
and move the motor. If you use the motor, 
22KHz Tone, Tone Burst  and DiSEqC 
are disabled.
NOTE
 y When Channel Auto Update is On, you can 
update information for all the programmes 
that can be updated, including the pro -
gramme currently being watched.
 y When Channel Auto Update is Off, you can 
only update information for the programme 
currently being watched.
 yYou can not select the Cable DTV Setting 
when the service operator is set to " Ziggo".
  
						

							35
ENGENGLISH
WATCHING TV
NOTE
 yIf you set  Satellite to Others when adding a 
setting ID, you must add a transponder using 
Manual Tuning .
 yYou can add up to 16 setting IDs. yAll setting IDs can be deleted, except for 
Setting ID 1 .
 yWhen selecting  22KHz Tone and DiSEqc, or 
Tone Burst and DiSEqc, you must connect 
them in the same position as displayed on 
the OSD. 
 y If you delete a setting ID, all programmes 
stored in the setting ID are deleted.
6 If you select Motorized System to On, select 
your desired  source.
7 When you are finished, press EXIT.
When you return to the previous menu, press 
BACK .
Option Description
Drive 
Direction Select the direction in which you want to 
move the motor.
Drive Mode Two modes are available: Step and Con -
tinuous.
 y Step: The motor moves based on the 
value you enter (from 1 to 128).
 yContinuous
: The motor moves con-
tinuously until you press the "Stop".
Test TP Select the test TP you want to tune.
Set Limit Set the motor movement to east or west 
to have the motor move only within the 
direction set.
 yOn: You can limit the movement to 
the current direction by selecting the 
"West/East".
 yOff: You can cancel the limit you set.
Go To Zero You can move the motor to "Zero".
Store You can save the motor's current direction.
Tivu Programme List Update
 
1 Press Home to access the Home menu .
2 Press the Navigation buttons to scroll to 
SETUP and press OK. 
3 Press the Navigation buttons to scroll to 
SETUP and press OK.
4 Press the Navigation buttons to scroll to  Tivu 
Programme List Update and press OK.
5 Press the Navigation buttons to scroll to 
Off or On .
(In Satellite, Antenna & Satellite, Cable & Satellite 
mode only-Only Satellite models)(Only Italy)
NOTE
 y
It updates the changed Programme List in -
formation by based on country broadcasting 
circumstance and satellite.
 y It updates the Programme List when the TV 
turn off all the time. After updates, the Pro-
gramme List may be changed. If not want, 
select Off.
  
						

							36
ENGENGLISH
WATCHING TV
NOTE
 yIf the TV scans a blocked programme, you 
will be prompted to enter your password to 
keep the programme scanned.
 ySymbol rate : Enter a user-defined symbol 
rate (Symbol rate: Speed at which a device 
such as modem sends symbols to a chan -
nel).
 y Modulation  : Enter a user-defined modula -
tion. (Modulation: Loading of audio or video 
signals onto carrier).
 y You can not select the Cable DTV when the 
service operator is set to "Ziggo" or "Other 
Operators" of Netherlands.
1 Press Home to access the Home menu .
2 Press the Navigation buttons to scroll to 
SETUP and press OK. 
3 Press the Navigation buttons to scroll to 
SETUP and press OK.
4 Press the Navigation buttons to scroll to 
Manual Tuning and press OK.
5 Press the Navigation buttons to scroll to Cable 
DTV.
6 Make appropriate adjustments.
7 When you are finished, press EXIT.
When you return to the previous menu, press 
BACK .
Selecting Cable,
(In Cable, Cable & Satellite(-Only Satellite models) 
mode only)
1 Press Home to access the Home menu .
2 Press the Navigation buttons to scroll to 
SETUP and press OK. 
3 Press the Navigation buttons to scroll to 
SETUP and press OK.
4 Press the Navigation buttons to scroll to 
Manual Tuning and press OK.
5 Press the Navigation buttons to scroll to DTV.
6 Scroll through the programme types, and then 
add programmes .
7 When you are finished, press EXIT.
When you return to the previous menu, press 
BACK .
Manually setting up programme 
(In digital mode)
Manual Tuning lets you manually add a pro -
gramme to your programme list.
Selecting Antenna,
NOTE
 y If the TV scans a blocked programme, you 
will be prompted to enter your password to 
keep the programme scanned.
 y You can select  SBAND when the country is 
set to "Norway, Latvia."
  
						

							37
ENGENGLISH
WATCHING TV
NOTE
 yIf the TV scans a blocked programme, you 
will be prompted to enter your password to 
keep the programme scanned. 
 yTransponder : If there is no transponder to 
use, you can add a transponder by logging in 
as User . 
 yIf more than 2000 transponders are stored, 
you cannot add any more transponders. To 
add transponders, delete the unused setting 
IDs in SETUP > Satellite DTV Setting  and 
try again.
 y If there is no transponder, you cannot use 
Auto Tuning . In this case, you must add a 
transponder using  Manual Tuning.
1 Press Home to access the Home menu .
2 Press the Navigation buttons to scroll to 
SETUP and press OK. 
3 Press the Navigation buttons to scroll to 
SETUP and press OK.
4 Press the Navigation buttons to scroll to 
Manual Tuning and press OK.
5 Press the Navigation buttons to scroll to Satel-
lite DTV.
6 Make appropriate adjustments.
7 When you are finished, press EXIT.
When you return to the previous menu, press 
BACK .
Selecting Satellite,
(In Satellite, Antenna & Satellite, Cable & Satellite 
mode only-Only Satellite models)
NOTE
 y If the TV scans a blocked programme, you 
will be prompted to enter your password to 
keep the programme scanned.
 y L : SECAM L/L’ (France) (Except for DVB-T2 
support models)
 y  BG  : PAL B/G, SECAM B/G (Europe / East 
Europe / Asia / New Zealand / M.East / Africa)
 y I : PAL I (U.K. / Ireland / Hong Kong / South 
Africa)
 y DK : PAL D/K, SECAM D/K (East Europe / 
China / Africa / CIS)
 y To store another channel, repeat steps 6 to 11.
Manually setting up programme 
(In analogue mode)
Manual Tuning lets you manually tune and arrange 
the stations in whatever order you desire. 
1 Press Home to access the Home menu .
2 Press the Navigation buttons to scroll to 
SETUP and press OK. 
3 Press the Navigation buttons to scroll to 
SETUP and press OK.
4 Press the Navigation buttons to scroll to 
Manual Tuning and press OK.
5 Press the Navigation buttons to scroll to 
TV or Cable TV or Cable DTV or Satellite 
DTV.
6 Scroll through the programme types, and then 
add or delete  programmes.
7 Press the Navigation buttons to scroll to 
TV System.
8 Press the Navigation buttons to scroll to 
V/UHF or Cable.
9 Press the Navigation buttons or Number but-
tons to scroll to the desired channel number.
10 Press the Navigation buttons to scroll and start 
searching .
11 Press the Navigation buttons to scroll to 
Store and press OK.
12 When you are finished, press EXIT.
When you return to the previous menu, press 
BACK .
  
						

							38
ENGENGLISH
WATCHING TV
Fine Tuning
(Except for Satellite models)
Normally fine tuning is only necessary if reception 
is poor.
1 Press Home to access the Home menu .
2 Press the Navigation buttons to scroll to 
SETUP and press OK. 
3 Press the Navigation buttons to scroll to 
SETUP and press OK.
4 Press the Navigation buttons to scroll to 
Manual Tuning and press OK.
5 Press the Navigation buttons to scroll to 
TV or Cable TV.
6 Press the Navigation buttons to scroll to 
Fine.
7 Fine tune for the best picture and sound.
8 Press the Navigation buttons to scroll to 
Store and press OK
9 When you are finished, press EXIT.
When you return to the previous menu, press 
BACK .
Assigning a station name
You can assign a station name with five characters 
to each programme number.
1 Press Home to access the Home menu .
2 Press the Navigation buttons to scroll to 
SETUP and press OK. 
3 Press the Navigation buttons to scroll to 
SETUP and press OK.
4 Press the Navigation buttons to scroll to 
Manual Tuning and press OK.
5 Press the Navigation buttons to scroll to 
TV or Cable TV.
6 Press the Navigation buttons to scroll to 
Name and press OK.
7 Press the Navigation buttons to scroll to select 
the position and make your choice of the sec -
ond character, and so on. You can use an the 
alphabet A to Z, the number 0 to 9, +/ -, and 
blank and press  OK.
8 Press the Navigation buttons to scroll to 
Close and press OK.
9 Press the Navigation buttons to scroll to 
Store and press OK
10 When you are finished, press EXIT.
When you return to the previous menu, press 
BACK .
  
						

							39
ENGENGLISH
WATCHING TV
6 When you are finished, press EXIT.
When you return to the previous menu, press 
BACK.
Editing your programme list
1 Press Home to access the Home menu .
2 Press the Navigation buttons to scroll to 
SETUP and press OK. 
3 Press the Navigation buttons to scroll to 
SETUP and press OK.
4 Press the Navigation buttons to scroll to Pro-
gramme Edit and press OK.
5 Edit programmes using the following buttons.
When a programme number is skipped, it means 
that you will be unable to select it using 
P  but-
ton during TV viewing. 
If you wish to select the skipped programme, 
directly enter the programme number with the 
NUMBER buttons or select it in the Programme 
edit menu.
This function enables you to skip the stored pro -
grammes.
Button Description 
Highlight the programme type.
Scrolls through programme types or pro -
grammes.
OK Edits programmes.
Watch Selects the highlighted 
programme to view.
Set as Fa-
vourite Registers or cancels the 
current programme in 
favourite programme list.
Skip Selects a programme 
number to be skipped.
Add/Delete 
(Only Analogue 
mode)Adds or deletes a programme.The deleted programme 
displays in blue.
Move 
(Only 
Analogue 
mode)Moves a programme.
Programme 
Number Edit 
(Only Digital 
mode)Selects your desired pro -
gramme number.
Block Blocks or unblocks a 
programme.
P 
Moves to the previous or next page.
Red button Selects your desired favourite programme 
group.
Green button
Starts Auto Sort.  (Only Analogue mode)Starts Satellite Programme Sort.  (Only 
Satellite DTV, Satellite Radio mode)
Selecting a programme on the programme list
1 Press LIST to access the programme  list.
ButtonDescription
Selects programme list or recent 
programme list.
Scrolls through programme.
OKSelects the highlighted programme 
to view.
P 
Moves to the previous or next page.
Red button Edits programme.
TV/RAD Selects a desired programme mode.
FAV Moves to the favourite programme 
list.
2 When you are finished, press EXIT.
When you return to the previous menu, press 
BACK .
NOTE
 yIf you select the blocked programme, you will 
be prompted to enter your password.
  
						

							40
ENGENGLISH
WATCHING TV
Using favourite programmes
Add the programmes that you watch frequently to 
the favourite list.
1 Select a programme to add to the favourite list.
2 Press FAV.
ButtonDescription
Selects a desired favourite programme  
group.
P 
Moves to the previous or next page.
Red button Moves to the Programme Edit. 
Green button Register or cancel the
 current pro-
gramme.
TV/RAD Selects a desired programme mode.
FAV Moves to the Programme List.
3 When you are finished, press EXIT.
CI [Common interface] Information 
1 Press Home to access the Home menu .
2 Press the Navigation buttons to scroll to 
SETUP and press OK. 
3 Press the Navigation buttons to scroll to 
SETUP and press OK.
4 Press the Navigation buttons to scroll to CI 
Information and press OK.
5 Select the desired item: Module information, 
smart card information, language, or software 
download etc and press  OK.
6 When you are finished, press EXIT.
This function enables you to watch some encrypt
-
ed services (pay services). If you remove the CI 
Module, you cannot watch pay services.
When the module is inserted into the CI slot, you 
can access the module menu.
To purchase a module and smart card, contact 
your dealer. Do not repeatedly insert or remove a 
CI module from the TV. This may cause a malfunc-
tion. When the TV is turned on after inserting a CI 
Module, you may not have any sound output.
This may be incompatible with the CI module and 
smart card.
CI (Common Interface) functions may not be pos -
sible depending upon the country broadcasting 
circumstances.
When using a CAM(Conditional Access Module), 
please make sure it meets fully the requirements 
of either DVB-CI or CI plus. 
A abnormal process of CAM(Conditional Access 
Module) may cause a bad picture.
NOTE
 y This OSD is only for illustration and the 
menu options and screen format will vary ac -
cording to the Digital pay services provider. 
 y It is possible for you to change CI (Com -
mon Interface) menu screen and service by 
consulting your dealer.
Booster
1 Press Home to access the Home menu .
2 Press the Navigation buttons to scroll to 
SETUP and press OK. 
3 Press the Navigation buttons to scroll to 
SETUP and press OK.
4 Press the Navigation buttons to scroll to 
Booster and press OK.
5 Select On or Off.
If reception is poor select Booster to On.
When the signal is strong, select 
Off.
(Except for Satellite models)