LG 55lv770s Owners Manual
Have a look at the manual LG 55lv770s Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1069 LG manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
21 ENGENGLISH ASSEMBLING AND PREPARING yDisconnect the power first, and then move or install the TV. Otherwise electric shock may occur. yIf you install the TV on a ceiling or slant - ed wall, it may fall and result in severe injury. Use an authorized LG wall mount bracket and contact the local dealer or qualified personnel. y Do not over tighten the screws as this may cause damage to the TV and void your warranty. y Use the screws and wall mount bracket that meet the VESA standard. Any dam - ages or injuries by misuse or using an improper accessory are not covered by the warranty. CAUTION y Use the screws that are listed on the VESA standard screw specifications. y The wall mount kit includes an installation manual and necessary parts. y The length of screws may differ depend - ing on the wall mount. Make sure to use the proper length. y For more information, refer to the manual supplied with the wall mount bracket. NOTE Mounting on a wall Attach a wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel. LG recommends that wall mounting be performed by a qualified professional installer. Make sure to use screws and wall mount bracket that meet the VESA standard. Standard dimen - sions for the wall mount kits are described in the following table. Separate purchase(Wall Mounting Bracket) Model 32LV55 ** 32LV57 ** 32LW55 ** 32LW57 ** 32LW65 **37LV55** 37LV57 ** 37LW55 ** 37LW57 ** VESA (A x B) 200 x 100200 x 200 Standard screw M4M6 Number of screws 44 Wall mount bracket LSW100B, LSW100BG LSW200B, LSW200BG 10 cm 10 cm 10 cm 10 cm Model42/47LV55** 42/47/55LV57 ** 42/47/55LV77 **, 42/47/55LW55**42/47/55LW57** 42/47/55LW65 ** 42/47/55LW75**42/47/55LW77** 47/55LW95 **72LZ97 ** VESA (A x B) 400 x 400600 x 400 Standard screw M6M8 Number of screws 44 Wall mount bracket LSW400B, LSW400BG, DSW400BG LSW600B A B
22 ENGENGLISH ASSEMBLING AND PREPARING yDo not move the TV by holding the cable management clip , as the cable management clip may break, and injuries and damage to the TV may occur. CAUTION Only 72LZ97** 2 Pull the cable management on the stand cover and organize cables. Then, put it back. 1 Gather and bind the cables w ith the cable holder. Tidying cables Only 32/37/42/47LV55 **, 32/37/42/47/55LV57 **, 42/47/55LV77 **, 32/37/42/47/55LW55 **, 32/37/42/47/55LW57 **, 32/42/47/55LW65 **, 42/47/55LW75 **, 42/47/55LW77 **, 47/55LW95 ** 1 Gather and bind the cables with the Cable Holder on the TV back cover. Cable Holder Cable Holder
23 ENGENGLISH REMOTE CONTROL REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the label inside the compartment, and close the battery cover. Be sure to point the remote control toward the remote control sensor on the TV. To remove the batteries, perform the installation actions in reverse. y Do not mix old and new batteries, as this may damage the remote control.\ CAUTION Alphanumeric buttonsEnters letters and numbers. LIST (See p.39) Accesses the saved programme list. ](Space) Opens an empty space on the screen keyboard. Q.VIEW Returns to the previously viewed programme. (POWER) Turns the TV on or off. LIGHT Illuminates the remote control buttons. ENERGY SAVING (See p.98) Adjusts the brightness of the screen to reduce energy consumption . AV MODE (See p.42) Selects an AV mode. INPUT (See p.43) Changes the input source; Turns the TV on. TV/RAD Selects Radio, TV and DTV programme.
24 ENGENGLISH REMOTE CONTROL + - Adjusts the volume level. MARK Selects a menu or option. FAV (See p.40) Accesses your favourite programme list. CHAR/NUM Switches between Letter and Number input modes. 3D (Only 3D models) (See p.92) Uses for viewing 3D video. RATIO (See p.41) Resizes an image DELETE Deletes letters and numbers. MUTE Mutes all sounds. P Scrolls through the saved programmes . PAGE Moves to the previous or next screen. AV MODE INPUTTV/ RADENERGY SAVING 1.,;@2 abc3 def 4 ghi5 jkl6 mno 7pqrs8 tuv 0[ 9 wxyz BACK EXIT OK LISTQ.VIEW PremiumHomeQ.MENU GUIDE ADAPP/ * INFO RATIO FAV RATIO MUTE MARK DELETE CHAR/NUMPP A G E L/R SELECT LIVE TV REC SMART TV Premium Accesses the Premium menus. Home Accesses the Home menu . Q. MENU (See p.44) Accesses the quick menus. 3D OPTION (Only 3D models) (See p.92) Used for viewing 3D video. Direct access to your internet portal of entertainment and news services\ developed by Orange. (Only France) Navigation buttons (up/down/left/right) Scrolls through menus or options. OK Selects menus or options and confirms your input. BACK Returns to the previous level. GUIDE Shows programme guide. EXIT Clears all on-screen displays and return to TV viewing. AV MODE INPUTTV/ RADENERGY SAVING 1.,;@2 abc3 def 4 ghi5 jkl6 mno 7pqrs8 tuv 0[ 9 wxyz BACK EXIT OK LISTQ.VIEW PremiumHomeQ.MENU GUIDE ADAPP/ * INFO RATIO FAV RATIO MUTE MARK DELETE CHAR/NUMPP A G E L/R SELECT LIVE TV REC SMART TV AV MODE LIGHT INPUTTV/ RADENERGY SAVING 1.,;@2 abc3 def 4 ghi5 jkl6 mno 7pqrs8 tuv 0[ 9 wxyz BACK EXIT OK LISTQ.VIEW PremiumHome Q.MENUGUIDE APP/ * INFO RATIO FAV RATIO MUTE MARK DELETE CHAR/NUMPP A G E L/R SELECT LIVE TV AD GUIDE @ SMART TV
25 ENGENGLISH REMOTE CONTROL Coloured buttons These access special functions in some menus. AV MODE INPUTTV/ RADENERGY SAVING 1.,;@2 abc3 def 4 ghi5 jkl6 mno 7pqrs8 tuv 0[ 9 wxyz BACK EXIT OK LISTQ.VIEW PremiumHomeQ.MENU GUIDE ADAPP/ * INFO RATIO FAV RATIO MUTE MARK DELETE CHAR/NUMPP A G E L/R SELECT LIVE TV REC SMART TV AV MODE LIGHT INPUTTV/ RADENERGY SAVING 1.,;@2 abc3 def 4 ghi5 jkl6 mno 7pqrs8 tuv 0[ 9 wxyz BACK EXIT OK LISTQ.VIEW PremiumHomeQ.MENU GUIDE AD INFO FAV RATIO MUTE MARK DELETE CHAR/NUMPP A G E SMART TV AV MODE LIGHT INPUTTV/ RADENERGY SAVING 1.,;@2 abc3 def 4 ghi5 jkl6 mno 7pqrs8 tuv 0[ 9 wxyz BACK EXIT OK LISTQ.VIEW PremiumHome Q.MENUGUIDE APP/ * INFO RATIO FAV RATIO MUTE MARK DELETE CHAR/NUMPP A G E L/R SELECT LIVE TV AD GUIDE @ SMART TV AV MODE LIGHT INPUTTV/ RADENERGY SAVING 1.,;@2 abc3 def 4 ghi5 jkl6 mno 7pqrs8 tuv 0[ 9 wxyz BACK EXIT OK LISTQ.VIEW PremiumHomeQ.MENU GUIDE ADAPP/ * INFO FAV MUTE MARK DELETE CHAR/NUMPP A G ERATIO SMART TV SUBTITLERecalls your preferred subtitle in digital mode. Control butto ns ( )Controls the Premium contents, DVR or Smart Share menus or the SIM- PLINK compatible devices (USB or SIMPLINK or DVR). LIVE TV (See p.79) Return to LIVE TV. REC Uses to adjust DVR menu . INFO (See p.90) Views the information of the current programme and screen . AD Switches the Audio Description On or Off. RATIO (See p.41) Resizes an image. GUIDE Shows programme guide. SIMPLINK (See p.123) Accesses the AV devices connected to the TV; Opens the SIMPLINK menu. APP/ * Select the MHP TV menu source. (Only Italy) (Depending on model) TELETEXT BUTTONS (See p.125) These buttons are used for teletext. For further details, see the ‘Teletext’ section.
26 ENGENGLISH REMOTE CONTROL This item is not included for all models. Refer to the Magic Motion Remote Control manual for operating instructio\ ns. Please read this manual carefully and use the TV correctly. When the message "Magic motion remote control battery is low. Change the battery." is displayed, replace the battery. To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching and ends to the label inside the compartment, and close the battery cover. Be sure to point the remote control toward the remote control sensor on the TV. To remove the batteries, perform the installation actions in reverse. Magic Motion Remote Control Functions P MUTE OK (POWER) Turns the TV on or off. Navigation buttons (up/down/ left/right) Scrolls through menus or options. Pointer (RF transmitter) Blinks the light when operating. + - Adjusts the volume level. P ꕌꕍScrolls through the saved pro - grammes. Home Accesses the Home menu . OKSelects menus or options and confirms your input. Press this button to display the pointer when it disappears from the screen. You can control the TV by selecting Quick Menu on the screen. - If you press the Navigation button while moving the pointer on the screen, the pointer disappears, and the Magic Motion remote control works as a common remote control. To display the pointer again, shake the Magic Motion remote control from side to side within two minutes after it disappeared. (If two minutes have passed, press the OK button to display the pointer.) MUTEMutes all sounds. y Do not mix old and new batteries, as this may damage the remote control CAUTION Home Menu Programme List Quick Menu (Only 3D models)
27 ENGENGLISH REMOTE CONTROL Registering Magic Motion Remote Control The Magic Motion Remote Control operates by pairing with your TV. Register the Magic Motion Remote Control to use. How to register the Magic Motion Remote Control To register the remote control , press the OK button on the remote control while aiming it at your TV. How to Re-register the Magic Motion Remote Control after Registration Failure Reset the remote control by pressing and holding both the OK and MUTE buttons for 5 seconds. (Once the reset is complete, the light on the Pointer blinks. ) Then repeat the above procedure to register the remote control. How to use Magic Motion Remote Control 1 Press OK button if there is no pointer on your TV screen. The pointer will then appear on the screen. If the pointer has not been used for a certain period of time, it will disappear. 2 You can move the pointer by aiming the Pointer Receiver of the remote control at your TV then move it left, right, up or down. If the pointer does not work properly after click - ing the OK button, leave the remote control for 10 seconds then use it again. Precautions to Take when Using the Magic Motion Remote Control y Use the remote control within the maximum com - munication distance (10 m). Using the remote control beyond this distance, or with an object obstructing it, may cause a communication failure. y A communication failure may occur due to nearby devices. Electrical devices such as a microwave oven or wireless LAN product may cause interference, as this will use the same bandwidth (2.4 GHz) as the Magic Mo - tion Remote Control. y The Magic Motion Remote Control may be damaged or may malfunction if it is dropped or receives a heavy impact. yWhen playing a game using the Magic Motion Remote Control, hold it securely by wrapping its strap around your wrist and adjusting the length with the adjustable ring. y Take care not to bump into nearby furniture or other people when using the Magic Motion Remote Control. yManufacturer and installer cannot provide service related to human safety as the ap - plicable wireless device has possibility of electric wave interference. y It is recommended that an Access Point (AP) be located more than 1 m away from the TV. If the AP is installed closer than 1 m, the magic motion remote control may not perform as expected due to frequency interference. Installing RF Dongle (Only 32/37/42/47LV55 **, 32/37/42/47/55LV57 **, 32/37/42/47/55LW55 **, 32/37/42/47/55LW57 **, 32/42/47/55LW65 **) Image shown may differ from your TV . 3 Attach the RF Dongle to the velcro as shown below and then turn on the TV. * If the RF dongle for the wireless media box is at - tached, attach the RF dongle for the Magic Motion remote control on the upper right of the back of the TV. * To avoid wireless interference, keep the distance between the RF dongle for the Magic Motion remote control and the Wi-Fi dongle at 20 cm. 1 Locate the designated Velcro attachment location on the TV. Then tear off the protection paper and attach the Velcro. (The attachment location is different depending on the TV model you own) or y Separate purchase : Except for 32/37/42/47/55LV571S, 32/37/42/47/55LW573S, 32/37/42/47/55LW575S NOTE * Attach the RF dongle aligning with the upper left corner bracket. 2 Connect the RF Dongle Cable plug on the RF Dongle to a USB jack on the TV. HDD IN USB IN 1 USB Apps USB IN 2 RF Dongle Velcro 20 cm
28 ENGENGLISH WATCHING TV WATCHING TV Connecting to an antenna Connect an antenna to watch TV while referring to the following. To prevent damage do not connect to the mains outlet until all connections are made between the devices. Connecting an antenna Connect the TV to a wall antenna socket with an RF cable (75 ). y Use a signal splitter to use more than 2 TVs. yIf the image quality is poor, install a signal amplifier properly to improve the image quality. yIf the image quality is poor with an antenna connected, aim the antenna to the correct direction. y An antenna cable and converter are not supplied. NOTE Wall Antenna Socket Connecting with a satellite dish (Only Satellite models) Connect the TV to a satellite dish to a satellite socket with a satellite RF cable (75 ). Satellite Dish
29 ENGENGLISH WATCHING TV 4 When the basic settings are complete, press OK. yIf you do not complete the Initial setting, it will appear whenever the TV turns on. yDisconnect the power cord from the power outlet when you do not use the TV for a long period of time. NOTE 5 To turn the TV off, press (POWER). y For those countries without confirmed DTV broadcasting standards, some DTV features might not work, depending on the DTV broadcasting environment. y When France is selected for Country, password is not ‘0’, ‘0’, ‘0’, ‘0’ but ‘1’, ‘2’, ‘3’, ‘4’. yTo display images in the best quality for your home environment, select Home Use. y Store Demo is suitable for the retail environment. yIf you select Store Demo, any customized settings will switch back to the default settings of Store Demo in 5 minutes. NOTETurning the TV on for the first time When you turn the TV on for the first time, the Initial setting screen appears. Select a language and customize the basic settings. 1 Connect the power cord to a power outlet. 2 In Standby mode, press ( POWER) to turn the TV on. The Initial setting screen appears if you turn the TV on for the first time. 3 Follow the on-screen instructions to customize your TV settings according to your preferences. Selects a language to display. Selects Home Use for the home environment. Sets the power indicator. (When you select Home Use from the Mode Setting) Selects a country to display. (Depending on model) Language Mode Setting Power Indicator Country Time Zone Set Password Network Setting Auto Tuning Selects the time zone and daylight saving. (When Russia is selected for Country) Sets your network to enable network-related feature on the TV. (Only 47/55LW95 **) Scans and saves available programmes automatically. Sets the password. (When France is selected for Country) y You can also access Factory Reset by accessing OPTION in the Home menu - SETUP . NOTE Watching TV 1 In Standby mode, press (POWER) to turn the TV on. 2 Press INPUT and select Antenna. 3 To turn the TV off, press (POWER). The TV switches to Standby mode.
30 ENGENGLISH WATCHING TV Accessing Home menu 1 Press Home to access the Home menu. 2 Press the Navigation buttons to scroll to one of the following m enus and press OK. 3 Press the Navigation buttons to scroll to the setting or option you want and press OK. 4 When you are finished, press EXIT. OptionDescription 1Current Date, Time 2Channel programme info 3Function card: You can enjoy various content files by selecting each card and you can edit the premium card by selecting 5 items. 4Function card position 5Sign In 6Exit 7Current watching channel screen 8INPUT, SETUP, GUIDE menu. 9Launcher bar Sign In Premium Search Sat. Jan. 1, 2011 12:00 World Nature 5:05 ~ 5:55 LG Apps Web Browser Media Link ArrowSudokuMy Apps INPUT SETUP GUIDE LG AppsHOT NEWExitUCC Service Movie Online Weather InfoPhoto Album Social Network Service 1 7 8 9 4 56 2 3 Unit convertor National-flag Mah-Jong Puzzle Horoscope Winesound