LG 55lv770s Owners Manual

							111
ENGENGLISH
CUSTOMIZING SETTINGS
SettingDescription
Data Service
(only in Ireland.) This function allow users to choose between MHEG (Digital Teletext) and Teletext if both 
exist at the same time.
If only one of them exists, either MHEG or Teletext is enabled regardless of which option you 
selected.
Factory Reset Resets the TV to factory default and erases all stored programmes.
Customizes the TV settings to suit your preference. The factory reset screen will appear 
when you turn on the TV for the first time.
 yIn Lock System “On” , if you forget your password, press ‘0’, ‘3’, ‘2’, ‘\
5’ on the 
remote  control handset.
NOTE
Set IDAdds an ID to the connected devices
Mode Setting Default selection is “Home Use”. We recommend setting the TV to “Home Use” mode for the 
best picture in your home environment.
Option
Home UseSelects it for the home environment.
Store Demo Selects it for the retail environment.
Demo Mode Sets to show special features of the TV. 
You can cancel the demo mode by pressing any buttons except the 
Volume and Mute buttons.
 yIt is not possible to use Demo Mode  in Home Use
 mode. yIn Store Demo, Demo Mode  is automatically set to On. yOn ce 
Demo Mode  is set to Off in Store Demo , Demo Mode  
does not run and only the screen is reset.
 y The screen is reset automatically after 5 minutes in 
Demo 
Mode.
NOTE
MHP Auto start(Only Italy)
(Depending on model) This menu is enabled only in Italy and MHP services of the other contries may not work 
properly.
This function is Auto Start function of MHP, Italian data broadcast.
Use in channel with MHP signal.
Data broadcast function may not be smooth due to situation from the broa\
dcasting station.
IR Blaster
(Depending on model) Adjusts when connecting Wireless media box (sold seperate). 
For futher information, refer to the "Wireless media box" manual for operating inssturctions.
 
  
						

							112
ENGENGLISH
CUSTOMIZING SETTINGS
NETWORK Settings
1 Press Home to access the Home menu.
2 Press the Navigation buttons to scroll to SETUP and press 
OK.
3 Press the Navigation buttons to scroll to NETWORK and 
press OK.
4 Press the Navigation buttons to scroll to the setting or option 
you want and press  OK.
- To return to the previous level, press BACK.
5 When you are finished, press EXIT.  
The available network settings are described in the following.
NETWORKOK
Move
• Network Setting : 
Wired• Network Status : Internet is connected• Smart TV Setting
• Legal Notice
Setting Description
Network Setting Configure the network settings  (See p.45).
Network Status Display the network status (See p.51).
Smart TV Setting Set the region for which weather forecast is provided and manage the IDs\
 added to the TV.
Setting
Country  SettingSet the country for premium services. Different premium services 
are provided depending on the country you set.
Weather Effect Sets the region for the weather to be displayed on the background 
of the premium service.
Select your region.
Premium Version Display the version of the premium service.
ID Management Manage the login history of the IDs added to the TV.
Reset Delete all IDs added and applications installed on the TV. Please be 
aware that all your paid applications may be deleted.
Legal Notice Display the Legal notice. (See p.53)
 Exit
  
						

							113
ENGENGLISH
CUSTOMIZING SETTINGS
SUPPORTOK
Move
• Software Update
• Picture Test
• Sound Test
• 
Signal Test
• Product/Service Info.
SUPPORT Settings
1 Press Home to access the Home menu .
2 Press the Navigation buttons to scroll to SETUP and press 
OK.
3 Press the Navigation buttons to scroll to SUPPORT and 
press OK.
4 Press the Navigation buttons to scroll to the setting or option 
you want and press  OK.
- To return to the previous level, press BACK.
5 When you are finished, press EXIT.  
The available support settings are described in the following.
Setting Description
Software Update Update the TV with the latest firmware.
Picture Test Executes picture or built-in melody sound tests.
 »If this test has an error, select Yes. You  will see product or service information. » If this test has no errors, check the connection status of external devi\
ces and refer to the manual of external devices.
Sound Test
Signal Test
Shows the MUX and Service information etc.
 yThis displays the information and signal strength of the tuned *MUX.
 yThis displays the signal information and service name of the selected MU\
X.
(*MUX: 
A higher directory of channels in digital broadcasting (a single MUX con\
tains multiple 
channels.))
 y If you select Satellite

 as the auto tuning input source, a signal test is not displayed. If 
you select Antenna & Satellite or Cable & Satellite, a signal test only for Antenna 
or Cable is displayed.
NOTE
Product/Service Info. Shows the product or service information. 
Customer Service Cen
ter can differ by country.
 Exit
  
						

							114
ENGENGLISH
MAKING CONNECTIONS
MAKING CONNECTIONS
Connect various external devices to the TV and switch input modes to select an external device. For more 
information on external device’s connection, refer to the manual provided with each device.
Available external devices are: HD receivers, DVD players, VCRs, audio sy\
stems, USB storage devices, 
PC, gaming devices,  and other external devices.
 yIf you record a TV programme
 on a DVD recorder or VCR, make sure to connect the TV 
signal input cable to the TV through a DVD recorder or VCR. For more  information on 
recording, refer to the manual provided with the connected device.
 y The external device connection may differ from the model.
 yConnect external devices to the TV regardless of the order of the TV port.
NOTE
  
						

							115
ENGENGLISH
MAKING CONNECTIONS
Connection Overview
Connect various external devices to the ports on the TV back panel.
1 Find an external device you want to connect to your TV as shown on the following illustration.
2 Check the connection type of the external device.
3 Go to the appropriate illustration and check the connection de tails.
HDMI – See p.116DVI – See p.116
Component – See p.117
Composite – See p.118
Digital – See p.121
HDMI – See p.119
DVI – See p.119
RGB – See p.120HDMI – See p.116
DVI – See p.116
Component – See p.117
Composite – See p.118
Euro Scart – See p.117
Composite – See p.118
Euro Scart – See p.117
Memory storage – 
See p.122
Memory card reader 
– See p.122
HDMI – See p.116
Component – See p.117
Composite – See p.118
HD Receiver DVDVCR
Speaker USB
PC Gaming device
 yIf you connect a gaming device to the TV, use the cable supplied with the gaming device.
 yRefer to the external equipment's manual for operating instructions.
NOTE
  
						

							116
ENGENGLISH
MAKING CONNECTIONS
DVI to HDMI Connection
Transmits the digital video signal from an external 
device to the TV. Connect the external device and 
the TV with the DVI-HDMI cable as shown in the 
following illustration.  To transmit an audio signal, 
connect an audio cable.
Connecting to a HD receiver, 
DVD, or VCR player
Connect a HD receiver, DVD, or VCR player to the 
TV and select an appropriate input mode.
HDMI Connection
Transmits the digital video and audio signals from 
an external device to the TV. Connect the external 
device and the TV with the HDMI cable as shown 
in the following illustration.
 y Use the latest High Speed HDMI™ Cable 
with CEC (Customer Electronics Control) 
function. 
 yHigh Speed HDMI™ Cables are tested 
to carry an HD signal up to 1080p and 
higher.
NOTE
 yThis section on MAKING CONNECTIONS 
mainly uses diagrams for the 47/55LW95
** 
models.
 y Image shown may differ from your TV.
  
						

							117
ENGENGLISH
MAKING CONNECTIONS
Euro Scart Connection
Transmits the video and audio signals from an 
external device to the TV set. Connect the external 
device and the TV set with the Euro Scart cable as 
shown on the following illustration. To display im-
ages by using progressive scan, make sure to use 
the Euro Scart cable.
 y Any Euro scart cable used must be 
signal shielded.
 yWhen watching digital TV in 3D imaging 
mode, monitor out signals cannot be 
output through the SCART cable. (Only 
3D models)
 y If you set the 3D mode to On while a 
scheduled recording is performed on 
digital TV, monitor out signals cannot 
be output through the SCART cable, 
and the recording cannot be performed. 
(Only 3D models)
NOTE
 y
If cables are installed incorrectly, it could 
case the image to display in black and 
white or with distorted colour. Check to 
ensure the cable are matched with the 
corresponding colour connection.
NOTE
Component Connection
Transmits the analogue  video and audio signals 
from an external device to the TV. Connect the 
external device and the TV with the component 
cable as shown in the following  illustration.
         Output Type 
Current 
input modeAV1
(TV Out1) AV1
(When DTV sched-
uled recording is in  progress using 
recording equip -
ment.)
Digital TV Digital TVO
Analogue TV, AV Analogue TVO
(The input mode is 
converted to DTV.)Component/RGB Analogue TV
HDMI XX
1  TV Out : Outputs  Analogue TV or Digital TV signals.
  
						

							118
ENGENGLISH
MAKING CONNECTIONS
Composite Connection
Transmits the analogue video and audio signals 
from an external device to the TV. Connect the 
external device and the TV with the composite 
cable as shown in the following illustration.
 y If you have a mono VCR, connect the 
audio cable from the VCR to the AUDIO 
L/MONO jack of the TV.
NOTE
Connecting to a PC
 NOTE
 y
It is recommended to use the TV set with the 
HDMI connection for the best image quality.
or
  
						

							119
ENGENGLISH
MAKING CONNECTIONS
HDMI Connection
Transmits the digital video and audio signals from 
your PC to the TV. Connect the PC and the TV 
with the HDMI cable as shown in the following 
illustrations.
DVI to HDMI Connection
Transmits the digital video signal from your PC to 
the TV. Connect the PC and the TV with the DVI-
HDMI cable as shown in the following illustration. 
To transmit an audio signal, connect an audio 
cable.
  
						

							120
ENGENGLISH
MAKING CONNECTIONS
RGB Connection
Transmits the analogue video signal from your 
PC to the TV. Connect the PC and the TV with the 
supplied D-sub 15 pin signal cable as shown in the 
following illustrations.  To transmit an audio signal, 
connect an audio cable. y There may be interference relating to 
resolution, vertical pattern, contrast or 
brightness in PC mode. Change the PC 
mode to another resolution or change the 
refresh rate to another rate or adjust the 
brightness and contrast on the menu until 
the picture is clear. If the refresh rate of 
the PC graphic card can not be changed, 
change the PC graphic card or consult the 
manufacturer of the PC graphic card.
 yThe synchronization input waveform for 
Horizontal and Vertical frequencies are 
separate.
 yWe recommend using 
1920x1080, 60 Hz 
for the PC mode, this should provide the 
best picture quality.
 y Connect the signal cable from the monitor 
output port of the PC to the RGB (PC) port 
of the TV or the signal cable from the HDMI 
output port of the PC to the HDMI IN (or 
HDMI/DVI IN) port on the TV.
 yConnect the audio cable from the PC to the 
Audio input on the TV. (Audio cables are 
not included with the TV).
 yIf using a sound card, adjust PC sound as 
required.
 yIf the graphic card on the PC does 
not output analogue and digital RGB 
simultaneously, connect only one of either 
RGB or HDMI IN (or HDMI/DVI IN) to 
display the PC output on the TV.
 yDOS mode may not work depending on the 
video card if you use an HDMI to DVI cable.
 yIf you use too long an RGB-PC cable, there 
may be interference
 on the screen. We 
recommend using under 5m of cable. This 
provides the best picture  quality.
NOTE