LG 55LM9600 Led Lcd Tv Owners Manual

							ENGLISH
21MAKING CONNECTIONS
Connecting to a HD receiver, DVD, or VCR player
Connect a HD receiver, DVD, or VCR player to the TV and select an approp\
riate input mode.
HDMI Connection
HDMI is the best way to connect a device.
Transmits the digital video and audio signals from an external device to the TV. Connect the external device 
and the TV with the HDMI cable as shown in the following illustration. 
y Use the latest High Speed HDMI™ Cable with CEC (Customer Electronics\
 Control) function. 
 
y High Speed HDMI™ Cables are tested to carry an HD signal up to 1080p \
and higher.
 NOTE
Choose any HDMI input port to connect. It does not matter which port you\
 use.
HDMI
 2  3
 1 
 (ARC) 
4 (MHL) 
/ DVI INDVD/ Blu-Ray / HD Cable Bo x / HD STB
(*Not Provided)
ARC (Audio Return Channel)
 
y When connected with a high-speed 
HDMI cable, digital audio can be sent 
to a compactible device without an 
additional optical audio cable.
 
y ARC is only supported on the HDMI input 
1 (ARC) port. An external audio device 
that supports ARC should be connected 
to HDMI 1 if you wish to use ARC
 
y DTV Audio Supported Codec: MPEG, Dolby 
Digital
 
y HDMI Audio Supporeted Format: Dolby 
Digital, PCM (Up to 192 KHz, 32k/44.1k/48k
/88k/96k/176k/192k) -> Not supported DTS.
 NOTE   
						

							ENGLISH
22MAKING CONNECTIONS
DVI to HDMI Connection
Transmits the digital video signal from an external device to the TV. Co\
nnect the external device and the 
TV with the DVI-HDMI cable as shown in the following illustration. To tr\
ansmit an audio signal, connect an 
audio cable.
(RGB/HDMI-PC)AUDIO(RGB/DVI)AUDIO
 2  3
 1 
 (ARC) 
4 (MHL) 
/ DVI INAUDIO OUT DVI OUT
(*Not Pr
ovided)
(*Not Pr ovided)
DVD/ Blu-Ray / HD Cable Bo x   
						

							ENGLISH
23MAKING CONNECTIONS
Connecting to a mobile phone
Mobile High-definition Link (MHL) is an interface for transmitting dig\
ital audiovisual signals from mobile 
phones to television sets. 
y Connect the mobile phone to the HDMI/DVI IN 4 (MHL) port to view the p\
hone screen on the TV.
 
y This only works for the MHL-enabled phone.
 
y Some applications can be operated by the remote control.
 
y For some mobile phones supporting MHL, you can control with the Magic Re\
mote Control.
 
y The MHL passive cable is needed to connect the TV and a mobile phone.
 NOTE
 2  3
 1 
 (ARC) 
4 (MHL) 
/ DVI IN
(*Not Pr ovided)
MHL Cable
Mobile phone   
						

							ENGLISH
24MAKING CONNECTIONS
Component Connection
Transmits analog video and audio signals from an external device to the \
TV. Connect the external device 
and the TV with a component cable as shown in the following illustration\
. 
y If cables are installed incorrectly, it could case the image to display \
in black and white or with 
distorted color.
 
y Check to ensure the cables are matched with the corresponding color conn\
ection.
 NOTE
VIDEOAUDIO
L
R
DVD/ Blu-Ray / HD Cable Bo x
(Use the component video cable pr
ovided.)
(Use the composite video cable pr ovided. )
(*Not Provided)
(*Not Pr ovided)
GREEN
RED
BL
UE
YELL OW
GREEN
YELL OW
WHITE RED GREEN
RED BL
UE GREEN
RED BL
UE
WHITE RED
WHITE RED
IN
COMPONENTAV
VIDEO AUDIOYPBPR   
						

							ENGLISH
25MAKING CONNECTIONS
Composite Connection
Transmits analog video and audio signals from an external device to the \
TV. Connect the external device 
and the TV with the composite cable as shown in the following illustrati\
on.
 
y If you have a mono VCR, connect the audio cable from the VCR to the AUDI\
O L/MONO jack of the 
TV.
 
y Check to ensure the cables are matched with the corresponding color conn\
ection.
 NOTE
IN
COMPONENTAV
VIDEO
AUDIOYPBPR
VIDEOMONO()AUDIO
L R
VCR / DVD/ Blu-Ray / HD Cable Bo x
(*Not Provided)
YELL OW
WHITE RED
YELLOW
WHITE
RED
YELL OW
YELLO W
WHITE
RED
(Use the composi
te video cable provided. )   
						

							ENGLISH
26MAKING CONNECTIONS
Connecting to a PC
 
y It is recommended to use the HDMI connection for the best image quality.\
 
y Depending on the graphics card, DOS mode video may not work if a HDMI to\
 DVI Cable is in use.
 
y In PC mode, there may be noise associated with the resolution, vertical patter\
n, contrast or 
brightness. If noise is present, change the PC output to another resolut\
ion, change the refresh rate 
to another rate or adjust the brightness and contrast on the PICTURE men\
u until the picture is clear.
 
y The synchronization input form for Horizontal and Vertical frequencies i\
s separate.
 
y Depending on the graphics card, some resolution settings may not allow t\
he image to be positioned 
on the screen properly.
 NOTE
HDMI Connection, DVI to HDMI Connection or RGB Connection
Choose method A, B, or C to make connection.
Method A: HdMI Connection
HDMI
 2  3
 1 
 (ARC) 
4 (MHL) 
/ DVI IN
Choose any HDMI input port  to connect. 
It does not matt er which port  you use.
(*Not Provided)
PC   
						

							ENGLISH
27MAKING CONNECTIONS
Method B: dVI to HdMI Connection
(RGB/HDMI-PC)AUDIO(RGB/DVI)AUDIO
 2  3
 1 
 (ARC) 
4 (MHL) 
/ DVI INAUDIO OUT DVI OUT
(*Not Pr
ovided)
(*Not Pr ovided)
PC
Method C: RGB Connection
R GB OUT (PC)AUDIO OU T
(PC)RGB(RGB/HDMI-PC)AUDIO(PC)RGB(RGB/DVI)AUDIO
(*Not Provided)
(*Not Pr ovided)
PC   
						

							ENGLISH
28MAKING CONNECTIONS
Connecting to an Audio System
You may use an optional external audio system instead of the built-in sp\
eaker. 
y If you use an optional external audio device instead of the built-in spe\
aker, set the TV speaker 
feature to off.
 NOTE
Digital Optical Audio Connection
Transmits a digital audio signal from the TV to an external device. Conn\
ect the external device and the TV 
with the optical audio cable as shown in the following illustration.
 
y Do not look into the optical output port. Looking at the laser beam may \
damage your vision.
 
y Audio with ACP (Audio Copy Protection) function may block digital audi\
o output.
 NOTE
OPTICAL A
UDIO IN  
OPTICAL
DIGIT AL
AUDIOOUT
Digital  Audio Syst em
(*Not Provided)   
						

							ENGLISH
29MAKING CONNECTIONS
Connecting to a USB
Connect a USB storage device such as a USB flash memory, external hard d\
rive, or a USB memory card 
reader to the TV and access the Smart Share menu to use various multimed\
ia files. 
y To use a HDD device, make sure that it is connected to the USB IN 1 HDD \
IN port.
 
y To store apps on a USB storage device, make sure that it is connected to\
 the USB IN 3 USB Apps 
port.
 
y Some USB Hubs may not work. If a USB device connected using a USB Hub is\
 not detected, 
connect it to the USB port on the TV directly.
 NOTE
USB
HDD IN USB Apps
      
1
2
3
USB IN
USB
HDD
USB Hub
(*Not Pr
ovided)
(*Not Pr
ovided)
(*Not Pr ovided)
Choose any USB input port to connect.
It does not matter which port you use.   
						

							ENGLISH
30REMOTE CONTROL
REMOTE CONTROL
Magic Remote Control Functions
When the message “Magic remote control battery is low. Change the bat\
tery.” is 
displayed, replace the battery. To replace batteries, open the battery c\
over, replace 
batteries (1.5 V AA) matching 
 and  ends to the label inside the compartment, 
and close the battery cover. Be sure to point the remote control at the \
remote control 
sensor on the TV. To remove the batteries, perform the installation acti\
ons in reverse.
 
y Do not mix old and new batteries, as this may damage the remote control.\
 CAUTION
Make sure to point the remote control at the remote control sensor on th\
e TV.
 
(
POWER )
Turns the TV on or off.
 HOME
Accesses the Home menu.
Navigation buttons  (up/down/left/right)
Scrolls through menus or options.
Pointer (RF transmitter) BACK
Returns to the previous level.
 VOL Adjusts the volume level.   CH  Scrolls through the saved channels.  (MUTE)
Mutes all sounds.
 MY APPS
Shows the list of Apps. 
Q.MENU 
Accesses the quick menu.Used for viewing 3D video.
 Wheel (OK)
Selects menus or options and confirms 
your input. 
Scrolls through the saved channels. 
If you press the navigation button while  moving the pointer on the screen, the 
pointer disappears, and the Magic remote  control works as a regular remote control.  To display the pointer again, shake the 
Magic remote control from side to side.
  Voice Search  (Depending on country)
Select the Voice Search icon on the screen. 
Speak slowly and precisely. When a voice 
is recognized, the processing message 
appears on the screen. Use the magic 
remote control no further than 15 cm from 
your face. (This is a beta version and only 
available in selected functions for supported 
models.)