LG 55LM9600 Led Lcd Tv Owners Manual

							ENGLISH
11ASSEMBLING AND PREPARING
INSTALLATION PROCEdURE
1 Open the package and make sure all the accessories are included.
2 Attach the stand to the TV set.
3 Connect an external device to the TV set.
4 Make sure the network connection is available.
You can use the TV network functions only when the network connection is\
 made.
ASSEMBLING ANd PREPARING
Unpacking
Check your product box for the following items. If there are any missing\
 accessories, contact the local 
dealer where you purchased your product. The illustrations in this manua\
l may differ from the actual 
product and item.
 
y Do not use any unapproved items to ensure the safety and product life sp\
an.
 
y Any damages or injuries by using unapproved items are not covered by the\
 warranty. 
 
y In case of some model, the thin film on screen is a part of TV, So don’\
t take it off.
 CAUTION
 
y The items supplied with your product may vary depending on the model.
 
y Product specifications or contents of this manual may be changed without\
 prior notice due to 
upgrade of product functions.
 
y For an optimal connection, HDMI cables and USB devices should have bezel\
s less than 10 mm (0.39 
inches) thick and 18 mm (0.7 inches) width.
 
y Use an extension cable that supports USB 2.0 if the USB cable or USB mem\
ory stick does not fit 
into your TV's USB port.
B
AA
B
*A
  10 mm (0.39 inches)
*B  
 18 mm (0.7 inches)
 NOTE   
						

							ENGLISH
12ASSEMBLING AND PREPARING
Magic remote control, 
Batteries (AA) 
(See p.30)Owner’s manual
Cinema 3D glasses 
The number of 3D glasses 
may differ depending on the 
model or country.
Stand body
(See p.16)Stand base
(See p.16)Stand screws 
8 EA, M4 x 20 
(See p.16)
Component video cable 
(See p.24)
Composite video cable 
(See p.24, 25)
Polishing cloth
(Depending on model) 
Use this to remove dust 
from the cabinet.   
						

							ENGLISH
13ASSEMBLING AND PREPARING
Optional Extras
Optional extras can be changed or modified for quality improvement witho\
ut any notification.
Contact your dealer for buying these items.
These devices only work with certain models.
AN-MR300 
Magic remote controlAG-F2**, AG-F3**
Cinema 3D glasses
The model name or design may be changed manufacturer’s circumstances \
or policies.   
						

							ENGLISH
14ASSEMBLING AND PREPARING
Parts and buttons
ButtonDescription
 /  (^ / v)Scrolls through the saved channels.
 /  (+ / -)Adjusts the volume level.
 (OK 065C
) Selects the highlighted menu option or confirms an input.
 (SETTINGS)
Accesses the main menus, or saves your input and exits the menus.
 (INPUT)
Changes the input source.
 (1B0B
 / I) Turns the power on or off.
1 Intelligent sensor - Adjusts the image quality and brightness based on\
 the surrounding environment.
Speakers
Screen
Buttons
Power indicator Remote control and 
intelligent
1 sensors   
						

							ENGLISH
15ASSEMBLING AND PREPARING
Lifting and moving the TV
When moving or lifting the TV, read the following 
to prevent the TV from being scratched or 
damaged and for safe transportation regardless of 
its type and size. 
y Avoid touching the screen at all times, as 
this may result in damage to the screen. 
 CAUTION
 
y It is recommended to move the TV in the 
box or packing material that the TV originally 
came in.
 
y Before moving or lifting the TV, disconnect 
the power cord and all cables.
 
y When holding the TV, the screen should face 
away from you to avoid damage.
 
y Hold the top and bottom of the TV frame 
firmly. Make sure not to hold the transparent 
part, speaker, or speaker grill area.
 
y When transporting a large TV, there should 
be at least 2 people.
 
y When transporting the TV by hand, hold the 
TV as shown in the following illustration.
 
y When transporting the TV, do not expose the 
TV to jolts or excessive vibration.
 
y When transporting the TV, keep the TV 
upright, never turn the TV on its side or tilt 
towards the left or right.   
						

							ENGLISH
16ASSEMBLING AND PREPARING
Setting up the TV
Put your TV on a pedestal stand and mount the TV on a table or wall.
Attaching the stand
If you are not mounting the TV to a wall, use the following instructions\
 to attach the stand. 
y Remove the stand before installing the TV 
on a wall mount by performing the stand 
attachment in reverse.
 NOTE
 
y When attaching the stand to the TV 
set, place the screen facing down on a 
cushioned table or flat surface to protect 
the screen from scratches.
 CAUTION
2
 
y Make sure that the screws are fastened 
completely. (If they are not fastened 
securely enough, the TV may tilt forward 
after being installed.)
 
y Do not fasten the screws with too much 
force; otherwise they may be worn out 
and get loosened.
 CAUTION
1
Front
Top View
Stand Body
Stand Base
M4 x 20 4 EA
3
M4 x 204 EA   
						

							ENGLISH
17ASSEMBLING AND PREPARING
Mounting on a table
1 Lift and tilt the TV into its upright position on a 
table.
- Leave a 10 cm (4 inch) (minimum) space from 
the wall for proper ventilation.
10 cm
10 cm
10 cm
10 cm
(
4  
i n c
h e
s)
2  Connect the power cord to a wall outlet.
 
y Do not place the TV near or on sources 
of heat, as this may result in fire or other 
damage.
 CAUTION
Adjusting the angle of the TV to suit view
Swivel 10 degrees to the left or right and adjust 
the angle of the TV to suit your view.
10
10
 
y When adjusting the angle of the TV, watch 
out for your fingers.
- Personal injury may occur if hands or 
fingers are pinched. If the product is tilted 
too much, it may fall, causing damage or 
injury.
R earFr on t
 CAUTION   
						

							ENGLISH
18ASSEMBLING AND PREPARING
Securing the TV to a wall (optional)
1 Insert and tighten the eye-bolts, or TV brackets 
and bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts 
position, remove the bolts first.
2  Mount the wall brackets with the bolts to the 
wall. 
Match the location of the wall bracket and the 
eye-bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets tightly 
with a sturdy rope. 
Make sure to keep the rope horizontal with the 
flat surface.
 
y Make sure that children do not climb on or 
hang on the TV.
 CAUTION
 
y Use a platform or cabinet that is strong and 
large enough to support the TV securely.
 
y Brackets, bolts and ropes are optional. You 
can obtain additional accessories from your 
local dealer.
 NOTE
Tidying cables
1 
Gather and bind the cables with the cable 
management clip.
Cable management clip
2 Gather and bind the cables with the cable 
holder on the back of the TV.
Cable holder
 
y Do not move the TV by holding the cable 
holder and cable management clip, as the 
cable holders may break, and injuries and 
damage to the TV may occur.
 CAUTION   
						

							ENGLISH
19ASSEMBLING AND PREPARING
Mounting on a wall
Attach an optional wall mount bracket at the rear 
of the TV carefully and install the wall mount 
bracket on a solid wall perpendicular to the 
floor. When you attach the TV to other building 
materials, please contact qualified personnel.
We recommend that you use an LG brand wall 
mount when mounting the TV to a wall.
10 cm
10 cm
10 cm
10 cm
Make sure to use screws and wall mounts that 
meet the VESA standard. Standard dimensions for 
the wall mount kits are described in the following 
table.
Model
47LM9600
55LM9600
VESA (A x B)
A
B
400 x 400
Standard screw M6
Number of screws 4
Wall mount bracket 
(optional) LSW400BX 
LSW420BX 
 
y Disconnect the power first, and then move 
or install the TV. Otherwise electric shock 
may occur.
 
y If you install the TV on a ceiling or slanted 
wall, it may fall and result in severe injury. 
Use an authorized LG wall mount and 
contact the local dealer or qualified 
personnel.
 
y Do not over tighten the screws as this may 
cause damage to the TV and void your 
warranty.
 
y Use the screws and wall mounts that meet 
the VESA standard. Any damages or injuries 
by misuse or using an improper accessory 
are not covered by the warranty.
 CAUTION
 
y Use the screws that are listed on the VESA 
standard screw specifications.
 
y The wall mount kit includes an installation 
manual and necessary parts.
 
y The wall mount bracket is optional. You can 
obtain additional accessories from your local 
dealer.
 
y The length of screws may differ depending 
on the wall mount. Make sure to use the 
proper length.
 
y For more information, refer to the manual 
supplied with the wall mount.
 NOTE   
						

							ENGLISH
20MAKING CONNECTIONS
MAKING CONNECTIONS
Connect various external devices to the TV and switch input modes to sel\
ect an external device. For more 
information of external device’s connection, refer to the manual prov\
ided with each device. 
Available external devices are: HD receivers, DVD players, VCRs, audio s\
ystems, USB storage devices, PC,  
gaming devices, and other external devices. 
y If you record a TV program on a DVD recorder or VCR, make sure to connec\
t the TV signal input 
cable to the TV through a DVD recorder or VCR. For more information of r\
ecording, refer to the 
manual provided with the connected device.
 
y The external device connection may differ from the model.
 
y Connect external devices to the TV regardless of the order of the TV por\
t.
 NOTE
Connecting to an antenna or cable
Connect an antenna, cable, or cable box to watch TV while referring to t\
he following. The illustrations may 
differ from the actual items and a RF cable is optional.
ANTENNA
 / CABLE
VHF Antenna
UHF  Antenna
Ant enna
T erminal
Coaxial (
75)
 
y Make sure not to bend the copper wire of 
the RF cable.
Copper wire
 
y Complete all connections between devices, 
and then connect the power cord to the 
power outlet to prevent damage to your TV.
 CAUTION
 
y Use a signal splitter to use more than 2 TVs.
 
y Visit http://lgknowledgebase.com for more 
information about the antenna and cable 
connection. Search for antenna.
 NOTE