LG 55le8500 Users Guide Specification

9
STAND INSTRUCTIONS (For 50/60PK750)
ꔛ Image shown may differ from your TV.
!NOTE
► When assembling the desk type stand, 
make sure the screws are fully tightened (If 
not tightened fully, the TV can tilt forward 
after the product installation). Do not  over 
tighten.
1Carefully place the TV screen side down on 
a cushioned surface to protect the screen 
from damage.
2Assemble the parts of the STAND BODY 
with the STAND BASE of the TV.
INSTALLATION (For 50PK750)
PROTECTION COVER
After removing the...

PREPARATION
10
INSTALLATION
DETACHMENT
ꔛ Image shown may differ from your TV.
!NOTE
► When assembling the desk type stand, 
make sure the screws are fully tightened (If 
not tightened fully, the TV can tilt forward 
after the product installation). Do not  over 
tighten.
1Carefully place the TV screen side down on 
a cushioned surface to protect the screen 
from damage.
2Assemble the parts of the STAND BODY 
with the STAND BASE of the TV.
3Assemble the TV as shown.
4Install the 4 screws into the holes...

11
INSTALLATION
DETACHMENT
ꔛ Image shown may differ from your TV.
!NOTE
► When assembling the desk type stand, make sure the screws are fully tightened (If not tightened 
fully, the TV can tilt forward after the product installation). Do not  over tighten.
1Carefully place the TV screen side down on 
a cushioned surface to protect the screen 
from damage.
2Assemble the parts of the STAND BODY 
with the STAND BASE of the TV. At this 
time, tighten the screws that hold the 
STAND BODY on.
3Assemble the TV...

PREPARATION
12
VESA WALL MOUNTING
Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building mate-
rials, please contact your nearest installer.
If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.
We recommend that you use an LG brand wall mount when mounting the TV to a wall.
LG recommends that wall mounting be performed by a qualified professional installer.
ModelVESA (A 
* B)A
BStandard 
ScrewQuantityWall Mounting...

13
CAUTION
► Do not install your wall mount kit while your TV is turned on. It may result in personal injury due to 
electric shock.
!NOTE 
► Screw length needed depends on the wall 
mount used. For further information, refer to 
the instructions included with the mount.
► Standard dimensions for wall mount kits are 
shown in the table.
► When purchasing our wall mount kit, a detailed 
installation manual and all parts necessary for 
assembly are provided.
► Do not use screws longer than the standard...

PREPARATION
14
1Connect the cables as necessary.
To connect additional equipment, see the 
EXTERNAL EQUIPMENT SETUP section.
2Open the CABLE MANAGEMENT CLIP as 
shown.32/42/47/55LE5400, 42/47/55LE5500, 
42/47/55LE7500, 47/55LE8500, 
42/47/55LX6500
1
Secure the power cord with the CABLE 
HOLDER on the TV back cover. 
It will help prevent the power cable from 
being removed by accident.
2After connecting the cables as necessary, 
install the CABLE HOLDER as shown and 
bundle the cables....

15
SWIVEL STAND
After installing the TV, you can adjust the TV set manually to the left or right direction by 20 º to suit 
your viewing position.
ATTACHING THE TV TO  A  DESK (For 32/42LD550, 32LE5400)
  The TV must be attached to a desk so it cannot be pulled in a forward/backward direction, poten-
tially causing injury or damaging the product. 
1-Screw
 ( provided as parts of the product)
Desk
Stand
KENSINGTON SECURITY SYSTEM
ꔛ This feature is not available for all models.
-  The TV is equipped with a...

PREPARATION
16
To connect an additional equipment, see the External Equipment Setup section in CD Manual.
RGB IN (PC)
LAN
WIRELESS
CONTROL
(RGB/DVI)
RS-232C IN(SERVICE ONLY)
OPTICAL
DIGITAL/DVI IN
23
1
VIDEOAUDIOL(MONO)RAV IN 1AUDIO INAUDIO OUT
VIDEOAUDIO
COMPONENT INYPBPRLR2
1
YLRPBPR
ꔡ
Component3
Composite4
You can use a adapter to connect 
DVI to HDMI, but you will only 
have 2 channel stereo for sound. 
The adapter is not needed when 
connecting a PC.* Typical Layout
Make sure 
you dont 
mix up the...

17
NETWORK
RGB IN (PC)
WIRELESS
CONTROL
(RGB/DVI)
/DVI IN
2
3
1
VIDEOAUDIOL(MONO)R
VIDEOAUDIO
COMPONENT IN
AV IN 1
AUDIO INAUDIO OUT
2
1
LAN
YPBPRLR
OPTICAL DIGITAL
RS-232C IN(SERVICE ONLY)
ꔡ
Broadband modem
Broadband modem Router
Broadband Service
Broadband Service
NETWORK SETUP
This TV can be connected to a local area network (LAN) via the LAN port. After making the physical 
connection, the TV needs to be set up for network communication. 
CAUTION
► Do not connect a modular phone cable to the LAN...

NETWORK
18
ꔛ This feature requires an always-on 
broadband internet connection.
ꔛ You do not need to connect to a PC 
to use this function.
ꔛ If Network Setting is not working, 
check your network conditions. Check 
the LAN cable and make sure your 
router has DHCP turned on if you 
wish to use the Auto Setting. 
ꔛ If the Network Setting is not com-
pleted, network may not operate nor-
mally. 
ꔛ IP Auto Setting: Select it if there is a 
DHCP server on the local area net-
work (LAN) via wired connection,...