LG 55le8500 Users Guide Specification

							9
STAND INSTRUCTIONS (For 50/60PK750)
ꔛ Image shown may differ from your TV.
!NOTE
► When assembling the desk type stand, 
make sure the screws are fully tightened (If 
not tightened fully, the TV can tilt forward 
after the product installation). Do not  over 
tighten.
1Carefully place the TV screen side down on 
a cushioned surface to protect the screen 
from damage.
2Assemble the parts of the STAND BODY 
with the STAND BASE of the TV.
INSTALLATION (For 50PK750)
PROTECTION COVER
After removing the stand, install the included 
PROTECTION COVER over the hole for the 
stand.
Press the PROTECTION COVER into the TV until 
you hear it click.
When installing the wall mounting bracket, use 
the PROTECTION COVER.
1Carefully place the TV screen side down on 
a cushioned surface to protect the screen 
from damage.
2Remove the screws that hold the stand on. 
3Detach the stand from TV.
DETACHMENT
STAND BASESTAND BODYM5 x 14
3Assemble the TV as shown.
4Install the 4 screws into the holes shown.
M4 x 28
50PK750 60PK750
M4 x 30M4 x 28
PROTECTION COVER
Fix a guide to the outside.
 
						

							PREPARATION
10
INSTALLATION
DETACHMENT
ꔛ Image shown may differ from your TV.
!NOTE
► When assembling the desk type stand, 
make sure the screws are fully tightened (If 
not tightened fully, the TV can tilt forward 
after the product installation). Do not  over 
tighten.
1Carefully place the TV screen side down on 
a cushioned surface to protect the screen 
from damage.
2Assemble the parts of the STAND BODY 
with the STAND BASE of the TV.
3Assemble the TV as shown.
4Install the 4 screws into the holes shown.
AC  
INCA
BLE  MA
NAGE
MENT
AC  IN
CABLE  MANAGEMENT
AC  IN
CABLE  MANAGEMENT
STAND BASE STAND BODY
AC  IN
CABLE  MANAGEMENT
AC  IN
CABLE  MANAGEMENT
AC  INC
ABL
E  MA
NAGE
MENT
PROTECTION COVER
After removing the stand, install the included 
PROTECTION COVER over the hole for the 
stand.
Press the PROTECTION COVER into the TV until 
you hear it click.
When installing the wall mounting bracket, use 
the PROTECTION COVER.
1Carefully place the TV screen side down on 
a cushioned surface to protect the screen 
from damage.
2Remove the screws that hold the stand on. 
3Detach the stand from TV.
STAND INSTRUCTIONS (For 32/42/46/52/60LD550, 47/55LD650)
M4 x 20
 
						

							11
INSTALLATION
DETACHMENT
ꔛ Image shown may differ from your TV.
!NOTE
► When assembling the desk type stand, make sure the screws are fully tightened (If not tightened 
fully, the TV can tilt forward after the product installation). Do not  over tighten.
1Carefully place the TV screen side down on 
a cushioned surface to protect the screen 
from damage.
2Assemble the parts of the STAND BODY 
with the STAND BASE of the TV. At this 
time, tighten the screws that hold the 
STAND BODY on.
3Assemble the TV as shown.
4Assemble the part of the STAND REAR 
COVER with the TV.
5Install the 4 screws into the holes shown.
1Carefully place the TV screen side down on 
a cushioned surface to protect the screen 
from damage.
2Remove the screws that hold the stand on. 
3Detach the STAND REAR COVER from TV.
4Detach the stand from TV.
STAND INSTRUCTIONS 
(For 32/42/47/55LE5400, 42/47/55LE5500, 42/47/55LE7500, 47/55LE8500, 42/47/55LX6500)
STAND BASE STAND BODY
STAND REAR 
COVER
M4 x 20(47/55LE8500)
M4 x 16(Other models)
M4 x 24(55LE5400/5500/7500, 
55LX6500)
M4 x 20(47/55LE8500)
M4 x 16(Other models)
 
						

							PREPARATION
12
VESA WALL MOUNTING
Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building mate-
rials, please contact your nearest installer.
If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.
We recommend that you use an LG brand wall mount when mounting the TV to a wall.
LG recommends that wall mounting be performed by a qualified professional installer.
ModelVESA (A 
* B)A
BStandard 
ScrewQuantityWall Mounting Bracket
(sold separately)
32LD550,
32LE5400200
 * 100 M4 4LSW100B, LSW100BG 
42/46LD550,
47LD650,
42/47LE5400,
42/47LE5500,
42/47LE7500,
47LE8500,
42/47LX6500200
 * 200 M6 4LSW200B, LSW200BG
 
52LD550, 55LD650,
55LE5400,
55LE5500,
55LE7500,
55LE8500,
60LD550,
55LX6500400
 * 400 M6 4LSW400B, LSW400BG
 
50PK750 400
 * 400 M6 4AW-50PG60M   AW-50PG60MS
  
60PK750 600
 * 400 M8 4AW-60PG60M   AW-60PG60MS
  
 
						

							13
CAUTION
► Do not install your wall mount kit while your TV is turned on. It may result in personal injury due to 
electric shock.
!NOTE 
► Screw length needed depends on the wall 
mount used. For further information, refer to 
the instructions included with the mount.
► Standard dimensions for wall mount kits are 
shown in the table.
► When purchasing our wall mount kit, a detailed 
installation manual and all parts necessary for 
assembly are provided.
► Do not use screws longer than the standard 
dimension, as they may cause damage to the 
inside to the TV.
► For wall mounts that do not comply with the 
VESA standard screw specifications, the length 
of the screws may differ depending on their 
specifications.
► Do not use screws that do not comply with the 
VESA standard screw specifications.
  Do not use fasten the screws too strongly, this 
may damage the TV or cause the TV to a fall, 
leading to personal injury. LG is not liable for 
these kinds of accidents.
► LG is not liable for TV damage or personal 
injury when a non-VESA or non specified wall 
mount is used or the consumer fails to follow 
the TV installation instructions.
DESKTOP PEDESTAL INSTALLATION
ꔛ Image shown may differ from your TV.
For proper ventilation, allow a clearance of 10.1 cm (4 inch) on all four sides from the wall.
10.1 cm (4 inch)10.1 cm (4 inch) 10.1 cm (4 inch)10.1 cm (4 inch)
CAUTION
► Ensure adequate ventilation by following the clearance recommendations.
► Do not mount near or above any type of heat source.
 
						

							PREPARATION
14
1Connect the cables as necessary.
To connect additional equipment, see the 
EXTERNAL EQUIPMENT SETUP section.
2Open the CABLE MANAGEMENT CLIP as 
shown.32/42/47/55LE5400, 42/47/55LE5500, 
42/47/55LE7500, 47/55LE8500, 
42/47/55LX6500
1
Secure the power cord with the CABLE 
HOLDER on the TV back cover. 
It will help prevent the power cable from 
being removed by accident.
2After connecting the cables as necessary, 
install the CABLE HOLDER as shown and 
bundle the cables.
32/42/46/52/60LD550, 47/55LD650
CABLE MANAGEMENT
ꔛ Image shown may differ from your TV.
3Put the cables inside the CABLE 
MANAGEMENT CLIP and snap it closed.
AC  IN
AC  IN
AC  IN
CABLE MANAGEMENT CLIP
CABLE HOLDER
CABLE HOLDER
Plasma TV
CABLE HOLDER
1
After connecting the cables as necessary, 
install the CABLE HOLDER as shown and 
bundle the cables.
In case of the LAN cable, install as shown 
to reduce the electromagnetic wave.
 
						

							15
SWIVEL STAND
After installing the TV, you can adjust the TV set manually to the left or right direction by 20 º to suit 
your viewing position.
ATTACHING THE TV TO  A  DESK (For 32/42LD550, 32LE5400)
  The TV must be attached to a desk so it cannot be pulled in a forward/backward direction, poten-
tially causing injury or damaging the product. 
1-Screw
 ( provided as parts of the product)
Desk
Stand
KENSINGTON SECURITY SYSTEM
ꔛ This feature is not available for all models.
-  The TV is equipped with a Kensington Security System con-
nector on the back panel. Connect the Kensington Security 
System cable as shown below.
-  For the detailed installation and use of the Kensington Security 
System, refer to the user’s guide provided with the Kensington 
Security System.
  For further information, contact http://www.kensington.com, 
the internet homepage of the Kensington company. Kensington 
sells security systems for expensive electronic equipment such 
as notebook PCs and LCD projectors.
NOTE: The Kensington Security System is an optional accessory.
WARNING
► To prevent TV from falling over, the TV should be securely attached to the floor/wall per installa-
tion instructions. Tipping, shaking, or rocking the machine may cause injury.
ꔛ Image shown may differ from your TV.
 
						

							PREPARATION
16
To connect an additional equipment, see the External Equipment Setup section in CD Manual.
RGB IN (PC)
LAN
WIRELESS
CONTROL
(RGB/DVI)
RS-232C IN(SERVICE ONLY)
OPTICAL
DIGITAL/DVI IN
23
1
VIDEOAUDIOL(MONO)RAV IN 1AUDIO INAUDIO OUT
VIDEOAUDIO
COMPONENT INYPBPRLR2
1
YLRPBPR
ꔡ
Component3
Composite4
You can use a adapter to connect 
DVI to HDMI, but you will only 
have 2 channel stereo for sound. 
The adapter is not needed when 
connecting a PC.* Typical Layout
Make sure 
you dont 
mix up the 
colors.
DVI2
Sorry, A phone 
Jack to stereo 
0.32 cm (1/8) 
headphone plug 
adapter is not 
included. It is 
available from 
most stores that 
carry electronics.
S-VIDEO
OUTPUT
SWITCH ANT IN
ANT OUT
RGB IN (PC)
LAN
WIRELESS
CONTROL
(RGB/DVI)/DVI IN
23
1
VIDEOAUDIO
COMPONENT INAUDIO INAUDIO OUT2
1
VIDEOAUDIOL(MONO)RAV IN 1
YPBPRLR
OPTICAL DIGITAL
(SERVICE ONLY)
LRVIDEO
AUDIO
Use Composite 
for the video 
connection if 
available. 
Match the jack 
colors.
HDMI OUTPUT
RGB IN (PC)
LAN
WIRELESS
CONTROL
(RGB/DVI)VIDEOL(MO
VIDEO
AUDIO INAUDIO OUT2
1
/DVI IN
23
1YPBPR
OPTICAL DIGITAL
(SERVIC
ꔡ
LRDVI OUTPUT
AUDIO
RGB IN (PC)
LAN
WIRELESS
CONTROL
RS-232C IN(SERVICE ONLY)
VIDEOAUDIOL(MONO)R
VIDEOAUDIO
COMPONENT IN
AV IN 1
YPBPRLR
AUDIO OUT2
1
/DVI IN
23
1
(RGB/DVI)AUDIO INOPTICAL DIGITAL
ꔡ
HDMI1
Use HDMI to connect 
external devices when 
available. If not avail-
able, use DVI or 
Component.
 
Connection Order
1
2
HDMI is the best way to connect a 
device. If it's not available, move down 
the list in order until you find a con-
nection that's available on each device.
HDMI
DVI
3
4
Component
Composite
ANTENNA/
CABLE IN
Use this connection when you need to 
connect directly to an antenna or cable 
system instead of using a cable box.  Antenna/Cable
Antenna
RF Coaxial 
Wire (75 Ω)Be careful not 
to bend the 
copper wire. Cable TV
OR
EXTERNAL EQUIPMENT SETUP
ANTENNA/ 
CABLE IN
RGB IN (PC)
LAN
WIRELESS
CONTROL
(RGB/DVI)OPTICAL DIGITAL
/DVI IN
2
3
1
VIDEOAUDIOL(MONO)R
VIDEOAUDIO
COMPONENT IN
AV IN 1
YPBPRLR
AUDIO INAUDIO OUT
2
1
RS-232C IN(SERVICE ONLY)
ꔡ
CONNECTING YOUR TV
 
						

							17
NETWORK
RGB IN (PC)
WIRELESS
CONTROL
(RGB/DVI)
/DVI IN
2
3
1
VIDEOAUDIOL(MONO)R
VIDEOAUDIO
COMPONENT IN
AV IN 1
AUDIO INAUDIO OUT
2
1
LAN
YPBPRLR
OPTICAL DIGITAL
RS-232C IN(SERVICE ONLY)
ꔡ
Broadband modem
Broadband modem Router
Broadband Service
Broadband Service
NETWORK SETUP
This TV can be connected to a local area network (LAN) via the LAN port. After making the physical 
connection, the TV needs to be set up for network communication. 
CAUTION
► Do not connect a modular phone cable to the LAN port.
► Since there are various connection methods, please follow the specifications of your telecommu-
nication carrier or internet service provider. 
1. How to connect
1Connect the LAN port of the Modem or Router to the LAN port on the TV.
2. How to use
ꔛ Select “Network Setting” in the NETWORK menu.
ꔛ After connecting the LAN port, use the NETCAST menu.
ꔛ For more information about NETCAST setup and troubleshooting, visit our Knowledgebase at 
LGknowledgebase.com. Search for NetCast.
Wired Network Connection
1
 
						

							NETWORK
18
ꔛ This feature requires an always-on 
broadband internet connection.
ꔛ You do not need to connect to a PC 
to use this function.
ꔛ If Network Setting is not working, 
check your network conditions. Check 
the LAN cable and make sure your 
router has DHCP turned on if you 
wish to use the Auto Setting. 
ꔛ If the Network Setting is not com-
pleted, network may not operate nor-
mally. 
ꔛ IP Auto Setting: Select it if there is a 
DHCP server on the local area net-
work (LAN) via wired connection, the 
TV will automatically be allocated an 
IP address. If you’re using a broad-
band router or broadband modem 
that has a DHCP (Dynamic Host 
Configuration Protocol) server func-
tion. The IP address will automatically 
be determined.
ꔛ IP Manual Setting: Select it if there is 
no DHCP server on the network and 
you want to set the IP address manu-
ally.
NETWORKꔂ Move    ꔉ Enter
•  Network Setting  : Wired•  Network Status  : Internet is connected
•  Legal Notice
•  ESN
Wired Network Setup
1MENUSelect NETWORK.
2ENTERSelect Network Setting.
3ENTERSelect Wired.
4ENTER
If you already set Network Setting: 
Select Resetting. The new connection 
settings resets the current network 
settings.
5ENTERSelect IP Auto Setting or IP Manual 
Setting.
12 ABC3 DEF4 GHI5 JKL6 MNO7PQRS8 TUV09 WXYZ
When Selecting IP Manual Setting:
IP addresses will need to be input 
manually.
6ENTERSelect Enter. IP Auto SettingIf you already set 
the Network Setting
 IP Manual Setting If wired and wireless networks are both available, wired is the preferred method.
After making a physical connection, a small number of home networks may require the TV network 
settings to be adjusted.
For detail information, contact your internet provider or router manual.
Network Type
Wired network is recommendedWired
Wireless 
Network Setting
Select the IP setting mode.
  IP Mode◀ IP Auto Setting ▶
ꔈIP Address255 . 255 . 0 . 0
ꔈSubnet Mask255 . 255 . 0 . 0
ꔈGateway255 . 255 . 0 . 0
ꔈDNS Server255 . 255 . 0 . 0
 ꕉ Previous
Enter
ꕯ Exit
Network Setting
Insert the IP address.
  IP Mode◀ IP Manual Setting ▶
ꔈIP Address255 . 255 . 0 . 0
ꔈSubnet Mask255 . 255 . 0 . 0
ꔈGateway255 . 255 . 0 . 0
ꔈDNS Server255 . 255 . 0 . 0
 ꕉ Previous
Enter
ꕯ Exit
Network Status
Network connecting
Setting Test Close
Previous setting value exists. Do
you want to connect with the
previous setting?
Enter
Resetting
ꕯ Exitꔉ Next
TV
Appeared when wired and 
wireless are simultaneously 
connected.