LG 50pk760 Owners Manual

							57
WATCHING TV / PROGRAMME CONTROL
•  Antenna or Cable : Select it when watch-
ing the DTV/RADIO/TV.
•    USB : Select it when using USB depends 
on connector.
•    AV  : Select it when watching the VCR or 
external equipment.
•   Component : Select it when using the 
DVD or the Digital set-top box depends on 
connector.
•   RGB :Select it when using PC depends on 
connector.
•   HDMI : Select it when using DVD, PC or 
Digital set-top box depend on connector.
INPUT LIST
HDMI and AV1 (SCART) can be recognized by a detect pin and thus enabled only when an exte\
rnal 
device approves voltage.
By using TV/RAD button, you can move from External Input to RF Input and to the last wa\
tched pro-
gramme in DTV/RADIO/TV mode. 
1Select the input source.
AntennaUSB1USB2
HDMI2HDMI3HDMI4HDMI1
AV 1AV 2Component
RGB OK
Move
Input List
Input LabelExit
 
■ Image shown may differ from your TV.
 
						

							58
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
INPUT LABEL
Selects a label for each input source.• 
Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
1Select Input Label .
2Select the source.
3Select the label.
BLUE
Input Label
AV 1
AV 2
Component
RGB
HDMI1
Close
▼
AntennaUSB1USB2
HDMI2HDMI3HDMI4HDMI1
AV 1AV 2Component
RGB OK
Move
Input List
Input LabelExit
◄
◄
◄
◄
◄
►
►
►
►
►
 
■ Image shown may differ from your TV.
 
						

							59
WATCHING TV / PROGRAMME CONTROL
OK
Move
●
 Language(Language)● Country :  Ireland● Disability Assistance● Power Indicator
 ●  Data Service  : MHEG● Factory Reset● Set ID  : 1●●●●●●●  MdMdMdModeModeModeModeModeModeModeModeModeModeStStStSetSetSetSetSetSetSetSet Set SettitititingtingtingtingtingtingtingtingtingtingggggHHH:H:H:H:H:H:H:H:H : H : Homeomeomeomeomeomeomeomeome ome UUUUseUseUseUseUseUseUseUseUseUse
OPTION
● Data Service  : MHEG
DATA SERVICE
(This menu is enabled only in Ireland. )
This function allow users to choose between  MHEG(Digital Teletext) and Teletext if both exist at the same 
time.
If only one of them exists, either MHEG or Teletext is enabled regardless of which option you select-
ed.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK  button to move to the previous menu screen.
1Select OPTION .
2Select Data Service .
3Select MHEG  or Teletext.
4Save.
OK
Move
●
 Language(Language)● Country :  Ireland● Disability Assistance● Power Indicator
 ●  Data Service  : MHEG● Factory Reset● Set ID  : 1●●●●●●●  MdMdMdModeModeModeModeModeModeModeModeModeModeStStStSetSetSetSetSetSetSetSet Set SettitititingtingtingtingtingtingtingtingtingtingggggHHH:H:H:H:H:H:H:H:H : H : Homeomeomeomeomeomeomeomeome ome UUUUseUseUseUseUseUseUseUseUseUse
OPTION
● Data Service  : MHEGMHEG
TeletextMHEG►►►
 
						

							60
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
OK
Move
●
 Language(Language)● Country :  Italy● Disability Assistance● Power Indicator
 ●  Data Service  : MHEG● Factory Reset● Set ID  : 1●●●●●●● MdMdMdModeModeModeModeModeModeModeModeModeodeStStStSetSetSetSetSetSetSetSet SetSettitititingtingtingtingtingtingtingtingtingtggggHHH:H:H:H:H:H:H:H:H : Homeomeomeomeomeomeomeomeome oeUUUUseUseUseUseUseUseUseUseUseUse
OPTION
● MHP Auto start  : Off
1Select  OPTION .
2Select MHP Auto start.
3Select On or Off.
OK
Move
●
 Language(Language)● Country :  Italy● Disability Assistance● Power Indicator
 ●  Data Service  : MHEG● Factory Reset● Set ID  : 1●●●●●●● MdMdMdModeModeModeModeModeModeModeModeModeodeStStStSetSetSetSetSetSetSetSet SetSettitititingtingtingtingtingtingtingtingtingtggggHHH:H:H:H:H:H:H:H:H : Homeomeomeomeomeomeomeomeome oeUUUUseUseUseUseUseUseUseUseUseUse
OPTION
● MHP Auto start  : OffMHEG
OffOn►►►
MHP SERVICE
(This menu is enabled only in Italy and MHP services of the other contries may not work properly.)
This function is Auto Start function of MHP, Italian data broadcast. 
Use in channel with MHP signal.
Data broadcast function may not be smooth due to situation from the broa\
dcasting station.
(Only  32/37/42LE48
**, 
32/37/42/47/55LE58
**, 32/37/42/47/55LE78
**, 
42/47LE7380,  42/47/55LE88
**, 
32/37/42LD48
**, 
32/37/42/47/55LD68
**, 
32/42/47LD78 **, 32/37/42LD88
**, 42/47LX68
**, 
47/55LX98
**, 50/60PK78
**, 
50/60PK98 **, 50/60PX98
**)
 
						

							61
WATCHING TV / PROGRAMME CONTROL
• Press the EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
 
■ When MHP Auto Start is set to On
1Display the  MHP.
RED
 
■ When MHP Auto Start is set to Off
1Display the  MHP Application List.
2Select your desired MHP broadcast.
 
						

							62
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
SIMPLINK
This function operates only with devices with the SIMPLINK logo.
Please check the SIMPLINK logo.
This TV might not function properly when using it with other products with HD\
MI-CEC function.
This allows you to control and play other AV devices connected to the display through HDMI cable 
without additional cables and settings.
If you do not want SIMPLINK menu,select “Off”.
In wireless external output, SIMPLINK function is not supported.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK  button to move to the previous menu screen.
1Display the SIMPLINK.
2Select On or Off.
3Save.
◄     On      ►
Watch TV
DISC
VCR
VCR
SpeakerTV Speaker
HDD Recorder
◄►
OKExit
 
						

							63
WATCHING TV / PROGRAMME CONTROL
Connecting to Home Theater with the SIMPLINK logo.
NOTE
 
► Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the terminal (HDMI terminal) of the SIMPLINK 
device with the HDMI cable. 
 
► When you switch the Input source using the INPUT button on the remote control, you can stop the opera-
tion of a device controlled by SIMPLINK.
 
►  When you select or operate a media device with 
home theater function, the speaker automatically 
switches to home theater speaker (HT speaker).
1Connect the HDMI/DVI IN 1(DVI),  HDMI/DVI IN 
2,  HDMI/DVI IN 3 or HDMI IN 4 (Except for 
32/37/42LD4 ***, 
32/37/42/47/55LD6
***, 
32/42/47LD7 ***, 32/37/42LD8
***)
 
terminal on 
the back of the TV and the HDMI output terminal 
of the Home Theater using HDMI cables.
2Connect the Digital Audio output terminal on 
the back of the TV and the Digital Audio input 
terminal of the Home Theater using optical 
cables.
3Select Home Theater in the Speaker menu by 
pushing the  SIMPLINK button.
    12
Home Theater
 
						

							64
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
Disc playback
Control connected AV devices by pressing the        
        , OK, ►, 
▀ , 
l l , ◄◄  and ►►
 buttons.
Direct Play 
After connecting AV devices to the TV, you can directly control the devices and play media without additional\
 set-
tings.
Select AV device
Enables you to select one of the AV devices connected to the TV and operate it.
Power off all devices
When you switch off the TV, all connected devices are turned off.
Switch audio-out 
Offers an easy way to switch audio-out.
Sync Power on
When the equipment with Simplink function connected HDMI terminal starts\
 to play, The TV will change automatically 
to turn on mode.
*  A device, which is connected to the TV through an HDMI cable but does not support SIMPLINK, 
does not provide this function.
Note: To operate SIMPLINK, an  High Speed HDMI Cable with *CEC function should be used. 
(*CEC: Consumer Electronics Control).
SIMPLINK Functions
 
						

							65
WATCHING TV / PROGRAMME CONTROL
SIMPLINK Menu 
Press the               button and then OK button to select the desired SIMPLINK source.
TV viewing :  Switch to the previous TV pro-
gramme regardless of the current mode.
DISC playback : Select and play connected 
discs.
When multiple discs are available, the device 
type of discs are conveniently displayed at 
the bottom of the screen.
VCR playback : Play and control the con-
nected VCR.
  HDD Recordings playback : Play and con-
trol recordings stored in HDD.
  Audio Out to Home theater/Audio Out to 
TV:  Select Home theater or TV speaker for 
Audio Out.
1
2
3
4
5
• Home theater: Only one supported at a time
• DVD, Recorder: Up to three(Only 32/37/42LD4 ***, 
32/37/42/47/55LD6
***, 32/42/47LD7
***, 
32/37/42LD8 ***), four(Only 32/37/42LE4
***, 
32/37/42/47/55LE5
***, 32/37/42/47/55LE7
***, 
42/47/55LE8 ***, 
42/47LX6
***, 47/55LX9
***, 50/60PK5
**, 50/60PK7
***, 50/60PK9
***, 50/60PX9
***) 
supported at a time.
• VCR: Only one supported at a time
◄      On      ►
Watch TV
DISC
VCR
VCR
SpeakerTV Speaker
HDD Recorder
◄►
OKExit
Selected Device
When a device is con-
nected (displayed in 
bright colour)
When device is not con-
nected (displayed in 
gray)
1
2
3
4
5
 
						

							66
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
OffCinema
GameSport
AV MODE
You can select the optimal images and sounds when connecting AV devices to external input.
Off     Disables the AV MODE.
Cinema or 
 Cinema  Optimizes video and audio for watching movies.
Sport 
      Optimizes video and audio for watching sports events.
Game        Optimizes video and audio for playing games.
• If you select Cinema  or  Cinema in AV mode, Cinema  or  
Cinema will be selected both for  Picture Mode and Sound Mode  in 
PICTURE menu and AUDIO menu respectively .
• If you select “Off” in AV mode, the picture and image which you initially set will be selected. 
• When playing a video game using PlayStation or Xbox, it is recommended to use the Game mode.
• When in Game mode, functions related to picture quality will be optimized for 
playing games.
1 Press the AV MODE button repeatedly to select the desired source.
2
 Cinemaor