LG 32lw4500 Owners Manual

							51
ENGENGLISH
3D IMAGING
 ySome menus may not work while watching the TV in 3D.
 yIf used 3D effect on the 2D source, 3D may not work. 
 yThe 3D imaging mode is disabled automatically when switching DTV channel\
s or input source.
 yThe screen may not be displayed properly if you view 2D DTV images in 3D\
 imaging mode.
 y3D effect can be seen when 3D Mode is selected appropriately for the 3D input\
 signal supplied to 
the TV.
 yFor *mpo files (3D camera files), the 3D imaging mode is enabled autom\
atically. 
 y3D may not be displayed properly for some PC graphics cards.
CAUTION
 yIf you select 3D mode, “Power indicator” is turned off automatically.
 yWhile watching 3D imaging, you cannot adjust video/audio settings using \
the menu.
 yYou can only choose “Standard → Cinema → Game” with the AV MODE button on the remote 
control. AV Mode is set as Standard while playing in 3D.
 yIf you’d like to play the BGM using *.mpo file(3D camera file), In \
advance, the contents path for 
BGM should be set on full-sized photo view screen which isn’t *.mpo f\
ile(3D camera file). 
 yPicture mode is set as Standard, Energy Saving Off if entering to 3D mode.
CAUTION
* For LCD TV/LED LCD TV
  
						

							52
ENGENGLISH
ENTERTAINMENT
ENTERTAINMENT
Connecting to a wired network
(Depending on model)
Connect the TV to a local area network (LAN) via 
the LAN port as shown on the following illustration 
and set up the network settings.
If wired and wireless networks are both available, 
wired is the preferred method.
After making a physical connection, a small 
number of home networks may require the TV 
network settings to be adjusted. For most home 
networks, the TV will connect to automatically 
without any adjustments.
For detail information, contact your internet pro-
vider or router manual.
 yDo not connect a modular phone cable to 
the LAN port.
 ySince there are various connection meth-
ods, please follow the specifications of 
your telecommunication carrier or internet 
service provider.
CAUTION
To set up the network seetings: (Even if your TV 
has already connected automatically, running 
setup again will not harm anything),
1 Press Home to access the main menus.
2 Press the Navigation buttons to scroll to 
SETUP and press OK.
3 Press the Navigation buttons to scroll to NET-
WORK and press OK.
4 Press the Navigation buttons to select Net-
work Setting and press OK.
5 If wired and wireless are simultaneously con-
nected, press the Navigation buttons to select 
Wired and press OK.
6 If you already set Network Setting, select 
Resetting. The new connection settings resets 
the current network settings. 
7 Select IP Auto Setting or IP Manual Setting.
- If selecting IP Manual Setting, press the 
Navigation and Number buttons. IP address-
es will need to be input manually.
- IP Auto Setting: Select this if there is a 
DHCP server (Router) on the local area 
network (LAN) via wired connection, the TV 
will automatically be allocated an IP address. 
If you’re using a broadband router or broad-
band modem that has a DHCP (Dynamic 
Host Configuration Protocol) server function. 
The IP address will automatically be deter-
mined.
8  When you are finished, press EXIT.
Internet
  
						

							53
ENGENGLISH
ENTERTAINMENT
 yIf you want to access the Internet directly 
on your TV, the broadband internet con-
nection should always be on.
 yIf you cannot access the Internet, check 
the network conditions from a PC on your 
network. 
 yWhen you use Network Setting, check 
the LAN cable or check if DHCP in the 
router is turned on.
 yIf you do not complete the network set-
tings, the network may not work properly.
NOTE
Tips for Network setting
 yUse a standard LAN cable with this TV. Cat5 or 
better with a RJ45 connector.
 yMany network connection problems during set 
up can often be fixed by re-setting the router or 
modem. After connecting the player to the home 
network, quickly power off and/or disconnect the 
power cable of the home network router or cable 
modem. Then power on and/or connect the 
power cable again.
 yDepending on the internet service provider 
(ISP), the number of devices that can receive 
internet service may be limited by the applicable 
terms of service. For details, contact your ISP.
 yLG is not responsible for any malfunction of the 
TV and/or the internet connection feature due 
to communication errors/malfunctions associ-
ated with your broadband internet connection, or 
other connected equipment.
 yLG is not responsible for problems within your 
internet connection.
 ySome content available through the network 
connection may not be compatible with the TV. If 
you have questions about such content, please 
contact the producer of the content.
 yYou may experience undesired results if the 
network connection speed does not meet the 
requirements of the content being accessed. 
 ySome internet connection operations may not 
be possible due to certain restrictions set by the 
Internet service provider (ISP) supplying your 
broadband Internet connection.
 yAny fees charged by an ISP including, without 
limitation, connection charges are your respon-
sibility.
 yA 10 Base-T or 100 Base-TX LAN port is re-
quired when using a wired connection to this TV. 
If your internet service does not allow for such a 
connection, you will not be able to connect the 
TV.
 yA DSL modem is required to use DSL service 
and a cable modem is required to use cable mo-
dem service. Depending on the access method 
of and subscriber agreement with your ISP, you 
may not be able to use the internet connection 
feature contained in this TV or you may be lim-
ited to the number of devices you can connect at 
the same time. (If your ISP limits sub-scription to 
one device, this TV may not be allowed to con-
nect when a PC is already connected.)
 yThe use of a “Router” may not be allowed or its 
usage may be limited depending on the policies 
and restrictions of your ISP. For details, contact 
your ISP directly.  
Network Status
1 Press Home to access the main menus.
2 Press the Navigation buttons to scroll to NET-
WORK and press OK.
3 Press the Navigation buttons to select Net-
work Status.
4 Press OK to check the network status.
5 When you are finished, press EXIT.
OptionDescription
SettingReturn to the network setting menu.
TestTest the current network status after setting the network.
CloseReturn to the previous menu.
  
						

							54
ENGENGLISH
ENTERTAINMENT
Tips for using USB storage devices
 yOnly a USB storage device is recognizable.
 yIf the USB storage device is connected 
through a USB hub, the device is not recog-
nizable.
 yA USB storage device using an automatic 
recognition programme may not be recog-
nized.
 yA USB storage device which uses its own 
driver may not be recognized.
 yThe recognition speed of a USB storage 
device may depend on each device.
 yPlease do not turn off the TV or unplug the 
USB device when the connected USB stor-
age device is working. When such device is 
suddenly separated or unplugged, the stored 
files or the USB storage device may be dam-
aged.
 yPlease do not connect the USB storage 
device which was artificially maneuvered on 
the PC. The device may cause the product to 
malfunction or fail to be played. Never forget 
to use only a USB storage device which has 
normal music files, image files or movie files.
 yPlease use only a USB storage device which 
was formatted as a FAT32 file system, NTFS 
file system provided with the Windows op-
erating system. In case of a storage device 
formatted as a different utility programme 
which is not supported by Windows, it may 
not be recognized.
 yPlease connect power to a USB storage 
device(over 0.5 A) which requires an external 
power supply. If not, the device may not be 
recognized.
 yPlease connect a USB storage device with 
the cable offered by the device maker.
 ySome USB storage devices may not be sup-
ported or operated smoothly.
 yFile alignment method of USB storage 
device is similar to Window XP and filename 
can recognize up to 100 English characters.
 yBe sure to back up important files since data 
stored in a USB memory device may be 
damaged. We will not be responsible for any 
data loss.
 yIf the USB HDD does not have an external 
power source, the USB device may not be 
detected. So be sure to connect the external 
power source. 
- Please use a power adaptor for an external 
power source. We do not guarantee an USB 
Connecting USB storage devices
Connect USB storage devices such as a USB 
flash memory, external hard drive to the TV and 
use multimedia features (See “Browsing files”on 
p.55).
Connect a USB flash memory or USB memory 
card reader to the TV as shown on the following 
illustration. The My media screen appears.
or
To disconnect a USB storage device, 
make sure to end the connection properly to pre-
vent damages to the TV or files.
1 Press Q.MENU to access the quick menus.
2 Press the Navigation buttons to scroll to USB 
Device and press OK.
3 Press the Navigation buttons to scroll to Eject 
and press OK.
4 Disconnect the USB storage device only when 
the message says that it is safe to remove.
 yDo not turn the TV off or remove a USB 
storage device while the USB storage 
device is connected to the TV, as this 
could result in loss of files or damage to 
the USB storage device.
 yBack up your files saved on a USB stor-
age device frequently, as you may lose 
or damage the files and this may be not 
covered by the warranty.
CAUTION
  
						

							55
ENGENGLISH
ENTERTAINMENT
cable for an external power source.
 yIf your USB memory device has multiple 
partitions, or if you use a USB multi-card 
reader, you can use up to 4 partitions or USB 
memory devices.
 yIf a USB memory device is connected to a 
USB multi-card reader, its volume data may 
not be detected.
 yIf the USB memory device does not work 
properly, disconnect and reconnect it.
 yHow fast a USB memory device is detected 
differs from device to device.
 yIf the USB is connected in Standby Mode, 
specific hard disk will automatically be 
loaded when the TV is turned on. yThe recommended capacity is 1 TB or less for a USB external hard disk and 32 GB or less for USB memory. yAny device with more than the recommended capacity may not work properly. yIf a USB external hard disk with a “Energy Saving” function does not work, turn the hard disk off and on again to make it work properly. yUSB storage devices below USB 2.0 are supported as well. But they may not work properly in the movie list. yMaximum of 999 folders or files can be rec-ognized under one folder.
Browsing files
Access the photo, music, or movie lists and browse 
files.
1 Connect a USB storage device.
2 Press Home to scroll to main menus.
3 Press the Navigation buttons to scroll to My 
Media and press OK. 
4 Press Navigation buttons to scroll to PHOTO 
LIST, MUSIC LIST, or MOVIE LIST and press 
OK.
Movie ListMusic ListPhoto List
Page 1/1Photo List
Drive1Page 1/1USB External
001
010011012013014015
002003004005006007008009
To Music ListChange NumbersMark ModeExit
MarkMARKViewPage ChangeMoveP
112
3
4
5
No.Description
1Moves to upper level folder
2Current page/Total pages
3Corresponding buttons on theremote control
4
Current page/ total pages ofcontents under the folderfocused on 1
5Contents under the folderfocused on 1
ButtomDescription
Green button
Repeatedly, press the GREEN button to converted to Photo List->Music List, Music List->Movie List or Movie List->Photo List.
Yellow buttonA method to view in 5 large thumbnail or simple list.
Blue buttonConvert to Mark Mode.
  
						

							56
ENGENGLISH
ENTERTAINMENT
Supported file format
TypeSupported file format
MovieDAT,MPG,MPEG,VOB,AVI,DIVX,MP4,MKV,TS,TRP,TP,ASF,WMV,FLV)
Movie(*.mpg/*.mpeg/*dat/*.ts/*.trp/*.tp/*.vob/*.mp4/*.mov/*.mkv/*.divx/*.avi/*.asf/*.wmv/*.flv/*.avi(motion-jpeg)/*.mp4(motion-jpeg)/*.mkv(motion-jpeg))sup-porting file
Video format : DivX3.11, DivX4.12, DivX5.x, DivX6, Xvid1.00, Xvid1.01, Xvid1.02, Xvid1.03, Xvid1.10 beta-1/beta-2,Mpeg-1, Mpeg-2, Mpeg-4, H.264/AVC, VC1, JPEG, Sorenson H.263
Audio format : Dolby Digital, AAC, Mpeg, MP3, LPCM, HE-AAC, ADPCM, WMA
Bit rate : within 32 kbps to 320 kbps(MP3)
External Subtitle format : *.smi/*.srt/*.sub(MicroDVD,Subviewer1.0/2.0)/*.ass/*.ssa/*.txt(TMPlayer)/*.psb(PowerDivX)
Internal Subtitle format : only, XSUB (It is the subtitle format used in DivX6 files)
PhotoJPEG
Baseline : 64 x 64 to 15360 x 8640Progressive : 64 x 64 to 1920 x 1440
 yYou can play JPEG files only. yNon-supported files are displayed in the form of predefined icon.
Only 3D Models
FileExtensionsItemProfile
2Djpegjpgjpe
supportedfile format ySOF0: baseline ySOF1:  Extend Sequential ySOF2: Progressive
photo size yMin: 64 X  64 yMax-Normal Type: 15360 (W) X 8640 (H) yProgressive Type: 1920 (W) X 1440 (H)
3Dmposupportedfile formatmpo
photo size y4:3 size: 3,648 X 2,736 2,592 X 1,944 2,048 X 1,536 y3:2 size: 3,648 X 2,432
MusicMP3
Bit rate 32 to 320 ySampling rate MPEG1 Layer3 : 32 kHz, 44.1 kHz, 48 kHz ySampling rate MPEG2 Layer3 : 16 kHz, 22.05 kHz, 24 kHz ySampling rate MPEG2.5 Layer3 : 8 kHz, 11.025 kHz, 12 kHz
Viewing movies
Play video files on the TV. Your TV displays all of
the video files saved in a USB storage device or
shared folder on a PC.
1 Press the Navigation buttons to scroll to My 
Media and press OK.
2 Press the Navigation buttons to scroll to Movie 
List and press OK.
3 Select Drive1 to access the connected USB 
storage device.
4 Press the Navigation buttons to scroll to a 
folder you want and press OK.
5 Press the Navigation buttons to scroll to a file 
you want and press OK.
Page 1/1Movie List
USB ExternalDrive1Page 1/1
MarkMARKPlayPage ChangeMoveP
To Photo ListChange NumbersMark  ModeExit
003001 002
004
005006
Page 1/1Movie List
USB ExternalDrive1Page 1/1
MarkMARKMarkPage ChangeMoveP
Play MarkedMark AllUnmark AllExit
003001002004
005006
Mark Mode
Exit Mark Mode
051. Apple_ ......02:30:25
MenuDescription
Play Marked
Play the selected movie file.Once a movie file finishes playing, the next selected one will be played automatically.
Mark AllMark all movie files on the screen.
Unmark AllDeselect all marked movie files.
Exit Mark ModeExit the Mark Mode.
  
						

							57
ENGENGLISH
ENTERTAINMENT
7 Control playback by using the following 
buttons.
►01:02:30 / 02:30:25OptionQ.MENU
◄►
■► II◄◄
►►HideExit
ButtonDescription
rStops the playback
sPlays a video
tPauses or resumes the playback
vScans backward in a file
wScans forward in a file
Home or Q.MENUShow the Option menu.
BACKHide the menu on the full-sized screen.
EXITReturn to Movie List.
< or >
Skips to specific points in a file during playback. The time of a specific point will appear on the status bar. In some files, this func-tion may not work properly.
ENERGY SAVING
Press the ENERGY SAVING button repeatedly to increase the brightness of your screen.
AV MODEPress the AV MODE button repeatedly to select the desired source.
Tips for using playing video files
 ySome user-created subtitles may not work 
properly.
 ySome special characters are not supported 
in subtitles.
 yHTML tags are not supported in subtitles.
 ySubtitles in languages other than the sup-
ported languages are not available.
 yThe screen may suffer temporary interrup-
tions (image stoppage, faster playback, etc.) 
when the audio language is changed.
 yA damaged movie file may not be played 
correctly, or some player functions may not 
be usable.
 yMovie files produced with some encoders 
may not be played correctly.
 yIf the video and audio structure of recorded 
file is not interleaved, either video or audio is 
outputted.
 yHD videos with a maximum of 
1920x1080@25/30P or 1280x720@50/60P 
are supported, depending on the frame.
 yVideos with resolutions higher than 
1920X1080@25/30P or 1280x720@50/60P 
may not work properly depending on the 
frame.
 yMovie files other than the specified types and 
formats may not work properly.
 yMax bitrate of playable movie file is 20 Mbps. 
(only, Motion JPEG : 10 Mbps)
 yWe do not guarantee smooth playback of 
profiles encoded level 4.1 or higher in H.264/
AVC.
 yDTS Audio codec is not supported.
 yA movie file more than 30 GB in file size is 
not supported for playback.
 yA DivX movie file and its subtitle file must be 
located in the same folder.
 yA video file name and its subtitle file name 
must be identical for it to be displayed.
 yPlaying a video via a USB connection that 
doesn’t support high speed may not work 
properly.
 yFiles encoded with GMC(Global Motion 
Compensation) may not be played. yWhen you are watching the movie by Movie 
List function, you can adjust an image by En-
ergy Saving and AV Mode key on the remote 
control. User setup for each image mode 
does not operate.
6 Play a movie.
NOTE
 yNon-supported files are displayed the 
preview image by icon only .
 yAbnormal files are displayed in the form of 
bitmap .
  
						

							58
ENGENGLISH
ENTERTAINMENT
SyncAdjusts the time synchronisation 
of the subtitle from -10 secs to 
+10 secs by steps of 0.5 secs 
during movie play.
PositionChanges the position of the
subtitle either up or down during 
movie play.
SizeSelects your desired Subtitle size
during movie play.
RepeatTurn on/off repeat function of
movie playback. When turned 
on, the file within the folder will 
be played back repeatedly. Even 
when the repeated playback
is turned off, it can run the play-
back if the file name is similar to 
the previous file.
Subtitle 
Language
Support Language
Latin1English, Spanish, French, Ger-
man, Italian, Swedish, Finnish, 
Dutch, Portuguese, Danish, 
Romanian,
Norwegian, Albanian, Gaelic, 
Welsh, Irish, Catalan,Valencian
Latin2Bosnian, Polish, Croatian, Czech,
Slovak, Slovenian, Serbian, 
Hungarian 
Latin4Estonian, Latvian, Lithuanian
CyrillicBulgarian, Macedonian, Russian, 
Ukrainian, Kazakh
GreekGreek
TurkishTurkish
 yOnly 10,000 of sync blocks can be supported 
within the subtitle file.
 yWhen playing a video, you can adjust the 
Picture Size by pressing the RATIO button.
NOTE
Video options
1 Press Q. MENU to access the Pop-Up menus.
2 Press the Navigation buttons to scroll to Set 
Video Play., Set Video. or Set Audio. and 
press OK. 
When you select the Set Video Play,,
1 Press the Navigation buttons to scroll to show 
the Picture Size, Audio Language, Subtitle 
Language or Repeat.
2 Press the Navigation buttons to scroll to make 
appropriate adjustments.
 yOption values changed in Movie List does 
not affect Photo List and Music List.
 yOption value changed in Photo List and Mu-
sic List are changed likewise in Photo List 
and Music List excluding Movie List.
 yWhen replaying the video file after stopping, 
you can play from where it stopped previ-
ously.
NOTE
MenuDescription
Picture SizeSelects your desired picture
format during movie play.
Audio Lan-
guage
Changes the Language Group of 
the audio during movie play. Files
with a single audio track cannot 
be selected.
Subtitle 
Language
Turn on/off the subtitle.
LanguageActivated for SMI subtitle and
can select the language within the 
subtitle.
Code PageCan select the font for subtitle.
When set to default, same font as 
general menu will be used.
  
						

							59
ENGENGLISH
ENTERTAINMENT
When you select the Set Video,,
1 Press the Navigation buttons to scroll to make 
appropriate adjustments. (See p.67)
When you select the Set Audio,,
1 Press the Navigation buttons to scroll to show 
the Sound Mode, Auto Volume, Clear Voice 
II or Balance.
2 Press the Navigation buttons to scroll to make 
appropriate adjustments. (See p.72)
Viewing photos
View image files saved in a USB storage device 
or shared folder on a PC through the network 
connection. The displays on the screen may differ 
from the model.
1 Press the Navigation buttons to scroll to My 
Media and press OK.
2 Press the Navigation buttons to scroll to Photo 
List and press OK.
3 Press the Navigation buttons to select Drive1 
to access the connected USB storage device.
4 Press the Navigation buttons to scroll to a 
folder you want and press OK.
5 Press the Navigation buttons to scroll to a file 
you want and press OK.
6 View photos.
NOTE
 yNon-supported files are displayed the pre-
view image by icon only  .
 yAbnormal files are displayed in the form of 
bitmap .
Page 1/1Photo List
Drive1Page 1/1USB External
001
010011012013014015
002003004005006007008009
To Music ListChange NumbersMark ModeExit
MarkMARKViewPage ChangeMoveP
Page 1/1Photo List
Drive1Page 1/1USB External
001
010011012013014015
002003004005006007008009
MarkMARKMarkPage ChangeMoveP
Mark Mode
View MarkedMark AllUnmark AllExitExit Mark Mode
MenuDescription
View MarkedDisplay the selected photo file.
Mark AllMark all photo files on the screen.
Unmark AllDeselect all marked photo files.
Exit Mark ModeExit the Mark Mode.
  
						

							60
ENGENGLISH
ENTERTAINMENT
Photo options
1 Press Q. MENU or Home to show the Option 
menus.
2 Press the Navigation buttons to scroll to Set 
Photo View., Set Video. or Set Audio. and 
press OK. 
 yOption values changed in Movie List does 
not affect Photo List and Music List.
 yOption value changed in Photo List and Mu-
sic List are changed likewise in Photo List 
and Music List excluding Movie List.
NOTE
When you select the Set Photo View,
1 Press the Navigation buttons to scroll to select 
Slide Speed or BGM..
2 Press the Navigation buttons to scroll to make 
appropriate adjustments.
OptionDescription
SlideshowStarts or stops a slideshow with selected photos.If there are no selected photos, all photos saved in the current folder display during a slideshow.To set a slideshow speed, select Option.
BGMTurns the background music on or off. To set the background music folder, select Option.You can adjust Option by Q.MENU or Home button on the remote control.
  (Rotate)Rotates photos clockwise (90°, 180°, 270°, 360°).
 
y The supported photo size is 
limited. You cannot rotate a 
photo if the resolution of the 
rotated width is larger than 
the supported resolution size.
NOTE
View the photo by zoom in 2, 4 times.
ENERGY SAVINGPress the ENERGY SAVING button repeatedly to change the brightness of your screen.
Using photo options
Use the following options while viewing photos.
01_a.jpg2008/12/101920 x 1080479 KB
2/13◄►
Slideshow►BGM■
◄
HideOptionQ.MENU
Number of selected photosOptions
Option ySlide Speed: Selects a slideshow speed (Fast, Medium, Slow). yBGM: Selects a music folder for the background music.
 
y You cannot change the music 
folder while the background 
music is playing. 
 
y You can only select the MP3 
folder saved on the device 
that currently displays the 
photo.
NOTE
HideHides the option window. To display the options, press OK.
EXITReturn to Photo List.
Exit
◄