LG 32ld455 Owners Manual

							
23
WATCHING TV / PROGRAMME CONTROL
 
■ When you select the Full,
Search every available signal.
Full
OK
Close
•  
If you wish to keep on auto tuning, select 
Start  using the 
       button. Then, press 
the  OK button. Otherwise select  Close. 
•  Automatic Numbering : Decide whether 
to use the programme numbers as sent 
by broadcasting stations for tuning.
•  Skip Scramble Programme  : Scramble 
Programme is skipped in  Auto Tuning 
and  Manual Tuning .
• 
You can not select the Full when the service  operator is set to  Ziggo or Other 
Operators  of Netherlands.
• Press the MENU/EXIT  button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
6Select Full.
7Select  OK.
8Select  Start.
9Run Auto tuning .
 
Check your antenna connection.
The previous channel information
will be updated during Auto Tuning.
Skip Scramble Programme
Automatic Numbering
Start
Close
Cable
Cable
 
						

							
24
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
The following values are needed in order to search all available program\
mes quickly and correctly.
The commonly used values are provided as default.
However, for correct settings, please inquire of the cable service provider.
When running Auto Tuning in DVB cable mode, selecting Full will search through all frequenc\
ies to 
find available channels.
In the case when the programme is not searched by selecting the Default,\
 perform the searching by 
selecting the Full.
However, in the case when the programme is searched by selecting the Full, the \
Auto Tuning time can be 
taken too much. 
•  Frequency :  Enter a user-defined frequency.
•  Symbol rate :  Enter a user-defined symbol rate (Symbol rate: Speed at which a device \
such as 
modem sends symbols to a channel).
•  Modulation :  Enter a user-defined modulation. (Modulation: Loading of audio or video\
 signals onto carrier).
• Network ID :  Unique identifier allocated for each user.
• 
Start Frequency :  Enter a user-defined start frequency range.
• 
End Frequency  : Enter a user-defined end frequency range.
 
 
						

							
25
WATCHING TV / PROGRAMME CONTROL
CABLE DTV SETTING
(IN CABLE MODE ONLY)
The range that a user can select from the Service Operator menu differs depending on number of 
Service Operator supported by each country, and if number of supported Service Operator for each 
country is 1, corresponding function becomes non-activation. 
After changing Service Operator, a warning window saying that channel map will be deleted when OK 
button is pressed or Close is selected, and a Auto-tuning pop-up window appears when ‘ YES’ is 
selected. 
• Press the  MENU/EXIT  button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
OK
Move
●
 Auto Tuning● Manual Tuning● Programme Edit● CI Information   ● Cable DTV Setting
SETUP
● Cable DTV Setting
OK
Move
●
 Auto Tuning● Manual Tuning● Programme Edit● CI Information   ● Cable DTV Setting
SETUP
● Cable DTV Setting
1Select  SETUP .
2Select Cable DTV Setting .
3Select Service Operator  or Channel 
Auto Update .
4Select your desired Source.
►
◄  Comhem  ►
Channel Auto  Update Service OperatorOff
Close
•  If you select  Cable, you can see  Cable 
DTV Setting  menu.
•  When Channel Auto Update  is On , you 
can update information for all the pro-
grammes 
that can be updated, including 
the programme 
currently being watched.
•  When  Channel Auto Update  is Off , you 
can only update information for the pro-
gramme currently being watched.
•  You can not select the  Cable DTV 
Setting  when the service operator is set 
to  Ziggo .
 
						

							
26
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
OK
Move
●
 Auto Tuning● Manual Tuning● Programme Edit● CI Information   
SETUP
● Manual Tuning
MANUAL PROGRAMME TUNING
Manual Tuning lets you manually add a programme to your programme list.
• Press the  MENU/EXIT  button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
(IN DIGITAL MODE)
1Select SETUP .
2Select Manual Tuning .
3
Select DTV.
4             Select the desired channel number.
5Select update or add if signal present.
OK
Move
●
 Auto Tuning● Manual Tuning● Programme Edit● CI Information   
SETUP
● Manual TuningFrequency(kHz) 474000
◄           DTV          ►
UHF CH.30
Close
Add
 ●  Signal Strength
 50%
  ●  Signal Quality
 50%
If you want to select the  Antenna,
•  Use NUMBER
 buttons to input a 4-digit 
password in  Lock System  ‘On ’.
•  You can select  SBAND when the country is set 
to Norway, Latvia.
►►
 
						

							
27
WATCHING TV / PROGRAMME CONTROL
OK
Move
●
 Auto Tuning● Manual Tuning● Programme Edit● CI Information   ● Cable DTV Setting
SETUP
● Manual Tuning
• Press the  MENU/EXIT  button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
1Select SETUP .
2Select Manual Tuning .
3
Select Cable DTV .
OK
Move
●
 Auto Tuning● Manual Tuning● Programme Edit● CI Information   ● Cable DTV Setting
SETUP
● Manual Tuning
If you want to select the  Cable,
◄       Cable DTV       ►
Frequency(kHz)362000Symbol rate(kS/s)6875Modulation64QAM
Close
Add
 ●  Signal Strength
 50%
  ●  Signal Quality
 50%
•   Use NUMBER
 buttons to input a 4-digit 
password in  Lock System  ‘On ’.
•   Symbol rate :  Enter a user-defined 
symbol rate (Symbol rate: Speed at 
which a device such as modem sends 
symbols to a channel).
•   Modulation :  Enter a user-defined 
modulation. (Modulation: Loading of 
audio or video signals onto carrier).
•  You can not select the  Cable DTV 
when the service operator is set to 
 Ziggo  or Other Operators  of 
Netherlands.
►►
Make appropriate adjustments.4
 
						

							
28
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
MANUAL PROGRAMME TUNING
(IN ANALOGUE MODE)
Manual Tuning lets you manually tune and arrange the stations in whatever order \
you desire. 
• Press the MENU/EXIT  button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
•  Use NUMBER
 buttons to input a 4-digit password in 
Lock System ‘On ’.
•  L : SECAM L/L’ (France)
  BG  : PAL B/G, SECAM B/G (Europe / East Europe / Asia / New Zealand / M.East / Africa)
  I : PAL I (U.K. / Ireland / Hong Kong / South Africa)
  DK  : PAL D/K, SECAM D/K (East Europe / China / Africa / CIS)
•  To store another channel, repeat steps 4 to 9.
1Select  SETUP .
2Select Manual Tuning .
3
Select TV or Cable TV .
4or
Select the desired 
programme
number on.
5Select a TV system.
6Select V/UHF or Cable .
or
7Select the desired 
channel number.
8Commence searching.
9Select  Store. 
● Storage
◄        Cable TV        ►
3● SystemBG● BandV/UHF● Channel
◄  ►
◄  ►●  Fine
● Search
0
● NameC  02
Close
Store
OK
Move
●
 Auto Tuning● Manual Tuning● Programme Edit● CI Information   
SETUP
● Manual Tuning● Storage
◄           TV           ►
3● SystemBG● BandV/UHF● Channel
◄  ►
◄  ►●  Fine
● Search
0
● NameC  02
Close
Store
OK
Move
●
 Auto Tuning● Manual Tuning● Programme Edit● CI Information   
SETUP
● Manual Tuning
or
►►
 
						

							
29
WATCHING TV / PROGRAMME CONTROL
You can assign a station name with five characters to each programme numb\
er.
 
■ Assigning a station name
• Press the  MENU/EXIT  button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
1Select SETUP .
2Select Manual Tuning .
3
Select TV or Cable TV .
4Select Name.
5
Select the position and make 
your choice of the second 
character, and so on.
You can use an the alphabet 
A to  Z, the number  0 to  9, +/ 
-, and blank. 
6Select  Close. 
7Select  Store. 
Normally fine tuning is only necessary if reception is poor.
 
■ Fine Tuning 
Select  Fine.
Select 
SETUP .
Select  Manual Tuning .
Select Store.
6
Fine tune for the best picture 
and sound.
1
2
Select  TV or Cable TV .3
4
5
OK
Move
●
 Auto Tuning● Manual Tuning● Programme Edit● CI Information   
SETUP
● Manual Tuning● Storage
◄           TV           ►
3● SystemBG● BandV/UHF● Channel
◄  ►
◄  ►●  Fine
● Search
0
● NameC  02
Close
Store
OK
Move
●
 Auto Tuning● Manual Tuning● Programme Edit● CI Information   
SETUP
● Manual Tuning● Storage
◄        Cable TV        ►
3● SystemBG● BandV/UHF● Channel
◄  ►
◄  ►●  Fine
● Search
0
● NameC  02
Close
Store
or
►►
 
						

							
30
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
PROGRAMME EDIT 
When a programme number is skipped, it means that you will be unable to \
select it using P       button 
during TV viewing. 
If you wish to select the skipped programme, directly enter the programm\
e number with the NUMBER 
buttons or select it in the Programme edit menu.
This function enables you to skip the stored programmes.
You can change the programme number using “Move”function, if “Au\
tomatic Numbering” is unchecked 
when you start Auto Tuning.
• Press the MENU/EXIT  button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
1Select SETUP .
2Select Programme Edit .
3Enter the Programme Edit .
4Select a programme to be stored or 
skipped.
OK
Move
●
 Auto Tuning
● Manual Tuning● Programme Edit● CI Information   
SETUP
● Manual Tuning● Manual Tuning● Manual Tuning● Manual Tuning● Programme Edit
Previous
Page Change
PBlock/UnblockSkip
Pr. Change
DTV RADIO
TV
800   YLE TV1
803   YLE24
806   Kanal Lokal
809   TV4 Plus
812   TV4 Fakta
815   Demo
818   24H TVE
801  YLE TV2
804  YLE Teema
807  CNN
802  YLE FST
805  TV4 Stockholm
808  TV4
810  TV400
813  MediaCorp HD5
811  TV4 Film
814  SNY_SSU
816  TVE 1817  TVE 2
819  CLAN/50 TVE820  LA7
Page 1/2Programme Edit Favourite Group : A
▼
Favourite Pr. GroupQ.MENUFavourite Pr.FAV
Previous
Page Change
PBlock/UnblockSkip
Pr. Change
Cable DTV Cable Radio
Cable TV
800   YLE TV1
803   YLE24
806   Kanal Lokal
809   TV4 Plus
812   TV4 Fakta
815   Demo
818   24H TVE
801  YLE TV2
804  YLE Teema
807  CNN
802  YLE FST
805  TV4 Stockholm
808  TV4
810  TV400
813  MediaCorp HD5
811  TV4 Film
814  SNY_SSU
816  TVE 1817  TVE 2
819  CLAN/50 TVE820  LA7
Page 1/2Programme Edit Favourite Group : A
▼
Favourite Pr. GroupQ.MENUFavourite Pr.FAV
or
►►
 
						

							
31
WATCHING TV / PROGRAMME CONTROL
This function enables you to delete or skip the stored programmes.
You can also move some channels and use other programme numbers.
 
■ Skipping a programme number
IN TV MODE
 
■ Deleting a programme
 
■ Moving a programme
IN DTV/RADIO MODE
•  When programmes are to be skipped, the 
skipped programme shows in blue and 
these programmes will not be selected by 
the  P         buttons during TV viewing.
•   If you wish to select a skipped programme, 
directly enter the programme number with 
the NUMBER buttons or select it in the 
programme edit or EPG.
•  The selected programme is deleted, all the 
following programmes are shifted up one
1Select a programme number to be skipped.
2
BLUE Turn the programme number to blue.
3
BLUE Release.
1Select a programme number to be deleted.
2
REDTurn the programme number to red.
1Select a programme number to be moved.
2GREENTurn the programme number to 
green.
3
GREENRelease.
 
■ Locking a programme number
1Select a programme number to be locked.
2
YELLOWTurn the programme number to yellow.
3
YELLOWRelease.
•  It can be registered as Lock 
programme even when Lock 
System is turned Off.
 
						

							
32
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
 
■ Auto Sort• After activating Auto Sort once, you can no 
longer edit programmes.
1Start Auto  Sort.
 
■ Skipping a programme number•  When a programme number is skipped it 
means that you will be unable to select it 
using the  P         button during normal TV 
viewing. 
•   If you wish to select a skipped programme, 
directly enter the programme number with 
the NUMBER buttons or select it in the 
programme edit or EPG.
1Select a programme number to be skipped.
2
BLUE Turn the programme number to blue.
3
BLUERelease.
 
■ Selecting favourite programme
1Select your desired programme.
2Add corresponding programme to Favourite 
list of current Favourite group.
3Release.
Favourite programmes is a convenient feature that lets you quickly scan \
up to programmes of your 
choice without having to wait for the TV to scan through all the in-between programmes.
 
■ Locking a programme number
1Select a programme number to be locked.
2
YELLOWTurn the programme number to yellow.
3
YELLOWRelease.
•  It can be registered as Lock 
programme even when Lock 
System is turned Off.