LG 32ld455 Owners Manual

							
11 3
SOUND & LANGUAGE CONTROL
DTV AUDIO SETTING (IN DIGITAL MODE ONLY)
When different audio types exist in an input signal, this function allows you to\
 select the audio type 
you want. 
• Press the MENU/EXIT  button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
•  Auto : Automatically outputs in the order  HE-AAC > Dolby Digital+  > Dolby Digital  > MPEG . 
    (Except for Italy)
   Auto : Automatically outputs in the order  HE-AAC > Dolby Digital+  > MPEG  > Dolby Digital . 
(Only Italy)
•   HE-AAC, Dolby Digital+, Dolby Digital, MPEG : Allows users to select the audio type they want. 
 ex) If  MPEG is selected,  MPEG is always outputted. 
         If MPEG is not supported, another audio type is set in that order.
•  Refer to p. 120 to 121 (Audio Language Selection)
1Select  AUDIO .
2Select DTV Audio Setting .
3Select Auto, HE-AAC, Dolby Digital +, Dolby 
Digital  or MPEG .
OK
Move
●●●●●●  SSSSounSounSounSounSounSounSounSounSounSoundMdMdMdModModModModModModModMod Mod Modddde :de :de :de :de :de :de :de :de :de :SStStStaStaStaStaStaStaStaSta Sta Stadddndarndarndarndarndarndarndarndarndarndarddddddddddddd
  • Infinite Sound : Off
 • Treble 50
 • Bass 50
 
• Reset
●
 Digital Audio Out  : PCM
● TV Speaker  : On
● DTV Audio  Setting  : Auto
AUDIO
● DTV Audio  Setting  : Auto
OK
Move
●●●●●●  SSSSounSounSounSounSounSounSounSounSounSoundMdMdMdModModModModModModModMod Mod Modddde :de :de :de :de :de :de :de :de :de :SStStStaStaStaStaStaStaStaSta Sta Stadddndarndarndarndarndarndarndarndarndarndarddddddddddddd
  • Infinite Sound : Off
 • Treble 50
 • Bass 50
 
• Reset
●
 Digital Audio Out  : PCM
● TV Speaker  : On
● DTV Audio  Setting  : Auto
AUDIO
● DTV Audio  Setting  : Auto
Auto
HE-AAC
Dolby Digital+
Dolby Digital
MPEGAuto
►
►
 
						

							
11 4
SOUND & LANGUAGE CONTROL
SOUND & LANGUAGE CONTROL
SELECTING DIGITAL AUDIO OUT
This function allows you to select your preferred Digital Audio Output.
When Dolby Digital is available, selecting Auto in the Digital Audio Out menu will set SPDIF(Sony 
Philips Digital InterFace) output to Dolby Digital. 
If Auto is selected in the digital audio out menu when Dolby Digital is not\
 available, SPDIF output will 
be PCM(Pulse-code modulation).
Even if both Dolby Digital and Audio language have been set in a channel which broadcast Dolby 
Digital Audio, only Dolby Digital will be played.• 
Press the MENU/EXIT  button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
Item Audio Input Digital Audio output
Auto(Speaker On)
MPEG
Dolby Digital
Dolby Digital Plus
HE-AAC PCM
Dolby Digital
Dolby Digital
PCM
Auto(Speaker Off)
MPEG
Dolby Digital
Dolby Digital Plus
HE-AAC
PCM
Dolby Digital
Dolby Digital
Dolby Digital
PCMAll PCM
1Select 
AUDIO .
2Select Digital Audio Out .
3Select Auto or PCM .
Manufactured under license from  
Dolby Laboratories. Dolby and the  
double-D symbol are trademarks of  
Dolby Laboratories.
•   There is a possibility that when HDMI mode, 
some DVD players do not make SPDIF sound. 
At that time, set the output of the digital audio of 
the DVD player to PCM. (In HDMI, Dolby Digital 
Plus is not supported).
OK
Move
●●●●●●● SSSSounSounSounSounSounSounSounSounSounSoundMdMdMdModModModModModModModModMod Modddde :de :de :de :de :de :de :de :de :de :SStStStaStaStaStaStaStaStaStaSta Stadddndarndarndarndarndarndarndarndarndarndarddddddddddddd
  • Infinite Sound : Off
 • Treble 50
 • Bass 50
 
• Reset
●
 Digital Audio Out  : PCM
● TV Speaker  : On
● DTV Audio  Setting  : Auto
AUDIO
● Digital Audio Out  : PCM
OK
Move
●●●●●●●
 SSSSo nSounSounSounSounSounSounSounSoundMdMdMdModModModModModModModMod Moddddede :de :de :de :de :de :de :de :StStStStaStaStaStaStaStaStaSta Stadddndarndarndarndarndarndarndarndarndardddddddddddd
  • Infinite Sound : Off
 • Treble 50
 • Bass 50
 
• Reset
● Digital Audio Out  : PCM
● TV Speaker  : On
● DTV Audio  Setting  : Auto
AUDIO
● Digital Audio Out  : PCMAuto
PCM
PCM
►►►
 
						

							
11 5
SOUND & LANGUAGE CONTROL
Settings of the selected Sound Mode return to the default factory settin\
gs.
AUDIO RESET
• Press the MENU/EXIT  button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
OK
Move
●●●●●●●
  SSSSounSounSounSounSounSounSounSounSounSoundMdMdMdModModModModModModModMod Mod Modddde :de :de :de :de :de :de :de :de :de :SStStStaStaStaStaStaStaStaSta Sta Stadddndarndarndarndarndarndarndarndarndarndarddddddddddddd
  • Infinite Sound : Off
 • Treble 50
 • Bass 50
 
• Reset
● Digital Audio Out  : PCM
● TV Speaker  : On
● DTV Audio  Setting  : Auto
AUDIO
 • Reset
OK
Move
●●●●●●●
  SSSSounSounSounSounSounSounSounSounSounSoundMdMdMdModModModModModModModMod Mod Modddde :de :de :de :de :de :de :de :de :de :SStStStaStaStaStaStaStaStaSta Sta Stadddndarndarndarndarndarndarndarndarndarndarddddddddddddd
  • Infinite Sound : Off
 • Treble 50
 • Bass 50
 
• Reset
● Digital Audio Out  : PCM
● TV Speaker  : On
● DTV Audio  Setting  : Auto
AUDIO
 • Reset►►
          
All audio settings will be resetted.
          Continue?
Ye sNo
?
1Select  AUDIO .
2Select Reset.
3Select Ye s.
4Initialize the adjusted value.
 
						

							
11 6
SOUND & LANGUAGE CONTROL
SOUND & LANGUAGE CONTROL
AUDIO DESCRIPTION (IN DIGITAL MODE ONLY)
This function is for the blind, and provides explanatory audio describin\
g the current situation in a TV 
programme in addition to the basic audio.
When Audio Description On is selected, basic audio and Audio Description are provided only for those 
programmes that have Audio Description included.
Volume Changes the Audio Description volume
Beep  Beeps when a programme with Audio Description information is selected
Adjustment for Audio Description Volume With selecting On
• Press the MENU/EXIT  button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
1Select OPTION .
2Select Disability Assistance .
3Select Audio Description .
4Select Volume  or Beep .
5
Make desired adjustment.
OK
Move
●
 Language(Language)● Country : UK● Disability Assistance● Power Indicator● Factory Reset● Set ID  : 1● Mode Setting  : Home Use
OPTION
● Disability Assistance
OK
Move
●
 Language(Language)● Country : UK● Disability Assistance● Power Indicator● Factory Reset● Set ID  : 1● Mode Setting  : Home Use
OPTION
● Disability Assistance
Close
• Volume                0
Hard of Hearing(   )
• Beep 
 Off     
 Off     
-+
Audio Description◄       On       ►►►
 
						

							
11 7
SOUND & LANGUAGE CONTROL
 I/II
 
■  Mono sound selection
If the stereo signal is weak in stereo reception, you can switch to mono\
. In mono reception, the 
clarity of 
sound is improved.
 
■ Language selection for dual language broadcast
If a programme can be received in two languages (dual language), you c\
an switch to DUAL I, 
DUAL II or DUAL I+II.
 
DUAL I   Sends the primary broadcast language to the loudspeakers.
 
DUAL II   Sends the secondary broadcast language to the loudspeakers.
 
DUAL I+II  Sends a separate language to each loudspeaker.
STEREO/DUAL RECEPTION (IN ANALOGUE MODE ONLY)
When a programme is selected, the sound information for the station appe\
ars with the programme 
number and station name.
Broadcast On Screen Display
Mono
MONO
StereoSTEREO
DualDUAL I, DUAL II, DUAL I+II
1Select Audio  or Audio Language. 
2Select the sound output.
 
						

							
11 8
SOUND & LANGUAGE CONTROL
SOUND & LANGUAGE CONTROL
NICAM RECEPTION (IN ANALOGUE MODE ONLY)
If the TV is equipped with a receiver for NICAM reception, high quality NICAM (\
Near Instantaneous 
Companding Audio Multiplex) digital sound can be received.
Sound output can be selected according to the type of broadcast received\
.
SPEAKER SOUND OUTPUT SELECTION
In AV, Component, RGB and HDMI mode, you can select output sound for the left\
 and 
right loudspeakers.
Select the sound output.
L+R:  Audio signal from audio L input is sent to the left loudspeaker and audio signal from 
audio R input is sent to the right loudspeaker.
L+L:   Audio signal from audio L input is sent to left and right loudspeakers.
R+R:  Audio signal from audio R input is sent to left and right loudspeakers.
1When  NICAM mono  is received, you can select  NICAM MONO or FM MONO .
2When NICAM stereo  is received, you can select  NICAM STEREO or FM MONO . 
If the stereo signal is weak, switch to  FM MONO.
3When NICAM dual  is received, you can select  NICAM DUAL I, NICAM DUAL II  or 
NICAM DUAL I+II  or FM MONO .
    
 
						

							
11 9
SOUND & LANGUAGE CONTROL
ON-SCREEN MENU LANGUAGE / COUNTRY 
SELECTION
The installation guide menu appears on the TV screen when it is switched on for the first time.* If you want to change Language/ Country selection
• 
Press the MENU/EXIT  button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
NOTE
 
► If you do not finish the set-up  Installation Guide by pressing BACK or if you time out on the OSD (On 
Screen Display) the installation menu will continuously appear until th\
e set up is completed whenever the 
TV is switched on.
 
► If you select the wrong local country, teletext may not appear correctly on the screen and some problems 
may occur during teletext operation.
 
► The CI (Common Interface) function may not be applied based on country\
 broadcasting circumstances.
 
► DTV mode control buttons may not function based on country broadcasting \
circumstances.
 
►   In country that Digital broadcasting regulation isn’t fixed, some DTV\
 function may not work depending on 
digital broadcasting circumstances.
 
► The Country Setting UK should only be activated in UK.
 
► If the country setting is set to --, European terrestrial digital stan\
dard broadcasting programmes are avail-
able, but some DTV functions may not work properly.
1Select your desired language.
2
Select your country.
1Select  OPTION .
2Select Language(Language) .
3Select Menu Language .
4Select your desired language. 
5Save.
1Select OPTION .
2Select Country .
3Select your country. 
4Select Ye s or No.
5Save.
 
						

							
120
SOUND & LANGUAGE CONTROL
SOUND & LANGUAGE CONTROL
120
The Audio function allows selection of a preferred language.
If audio data in a selected language is not broadcast, the default langu\
age audio will be played.
Use the Subtitle function when two or more subtitle languages are broadc\
ast. If subtitle data in a 
selected language is not broadcast, the default language subtitle will b\
e displayed.
When the languages you selected as the primary for Audio Language and Subtitle Language and Text 
Language are not supported, you can select language in secondary categor\
y. 
In Digital mode, use the Text language function when two or more Text languages are broadcast. If tele-
text data in a selected language is not broadcast, the default 
Text language page will be displayed.
• Press the  BACK button to move to the previous menu screen.
LANGUAGE SELECTION
1Select  OPTION .
2Select Language(Language) .
3Select Audio Language, Subtitle 
Language  or Text Language (Except 
for UK)
.
4Select your desired language. 
5Save.
1Select  OPTION .
2Select Disability Assistance .
3
Select Hard of Hearing(    ). 
4
Select  On or  Off.
 
						

							
121
SOUND & LANGUAGE CONTROL
< Audio Language Selection >
 
► When two or more audio languages are broadcast, you can 
select the audio language.
-  The audio/subtitles can be displayed in a simpler form with 1 to 3 chara\
cters broadcast by the service pro-
vider.
-  When you select supplementary Audio (Audio for “Visual/Hearing Impaired”) the TV may output a part of  the Main audio.
< Subtitle Language Selection >
 
► When two or more subtitle languages are broadcast, you 
can select the subtitle language with the  SUBTITLE button 
on the remote control.
 
►   Press the 
       button to select a subtitle language.
Subtitle Language OSD Information
Audio Language OSD Information
Display Status
N.A Not Available
MPEG Audio
Dolby Digital Audio
Audio for “Visual Impaired”
Audio for “Hearing Impaired”
Dolby Digital Plus Audio
HE-AAC Audio
Display Status N.A Not Available
Teletext Subtitle
 Subtitle for “Hard of Hearing”
1Select Audio  or Audio Language.
     Select an audio language.2
HE-AAC
 
						

							
122
CLOCK SETUP
TIME SETTING
The clock is set automatically when receiving a digital signal in Auto mode. You can set the clock 
manually in  Manual mode.
You must set the time correctly before using on/off timer function.
The TV time is set by the time offset information based on Time Zone and GMT (Greenwich Mean 
Time) which is received with the broadcast signal and the time is set au\
tomatically by a digital signal.
When if the city name in  Time Zone is changed into offset, you can change time by 1 hour.
Time Zone  menu can be changed in  Auto mode.
• Press the  MENU/EXIT  button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
1Select TIME.
2Select  Clock.
3Select  Auto or Manual .
4Select either the year, month, date, 
time or Time Zone option.
5Set the year, month, date, time or Time 
Zone option.
TIME SETTING
OK
Move
●
 Clock
● Off Time  : Off
● On Time  : Off
● Sleep Timer  : Off
TIME
● Clock● Clock
● Off Time  : Off
● On Time  : Off
● Sleep Timer  : Off
TIME
● Clock►OK
Move
Date3
MonthMar.
Year2008
Hour16
Minute09
Time ZoneLondon
Close
◄
  Auto  ►
OK
Move
GMT
This Table means the Time Zone table of 9 
area of Russia, and when the user selects the 
Time Zone for his or her area, it automatically 
sets the time for the corresponding area.
However, even though the user selected his or 
her area, if the broadcasting station’s local 
time offset is not offered, or if the region infor-
mation does not match, then the user may 
select the Offset from the Time Zone to set the 
correct time.
Time Zone
Magadan, Kamchatka
Vladivostok
Yakutsk
Irkutsk
Krasnoyarsk
Omsk 
Yekaterinburg
Moscow, Samara
Kaliningrad