LG 32LD420 LCD TV User Manual

31
PREPARATION
CABLE HOLDER
CABLE HOLDER
2After connecting the cables as necessary\f 
install the CABLE HOLDER as shown 
and bundle the cables.
1Secure the \bower cord with the  CABLE 
HOLDER on the TV back cover. 
It will hel\b \brevent the \bower cable from 
being removed by accident.
32/37/42/47/55LE5300 42/47/55LE7300
19/22/26LE5300, 22/26LE5500
1After connecting the cables as necessary\f 
install the 
CABLE HOLDER as shown 
and bundle the cables.
1 Install the CABLE MANAGEMENT  CLIP 
as shown.
2...

PREPARATION
PREPARATION
32
DESKTOP PEDESTAL INSTALLATION
SWIVEL STAND 
(Excep\f 19/22LE5300, 22LE5500)
After installing the TV\f you can adjust the TV set manually to the left or right direction by 20 º to suit 
your viewing \bosition.
ꔛ Image shown may differ from your TV.
For \bro\ber ventilation\f allow a clearance of 10.1 cm (4 inch) on all four sides from the wall.
10.1 cm (4 inch)
10.1 cm (4 inch)
10.1 cm (4 inch)
10.1 cm (4 inch)!
?
!
?
CAUTION
► Ensure adequate ventilation by following the...

33
PREPARATION
ATTACHING THE TV TO A DESK
(For 32/42LD420, 32/37/42LD450, 37/42LD450C, 32/42LD520, 42LD630, 32LE5300)
	 The	TV	must	be	attached	to	a	desk	so	it	cannot	be	pulled	in	a	\forward/backward	direction\b	poten-
tially	causing	injury	or	damaging	the	product.	
ꔛ	Image	shown	may	di\f\fer	\from	your	TV.
1-Screw
	(	provided	as	parts	o\f	the	product)
Desk
Stand
!
?
!
?
\fARN\bNG
►	To	prevent	TV	\from	\falling	over\b	the	TV	should	be	securely	attached	to	the	\floor/w all	per	installa-
tion	instructions....

PREPARATION
PREPARATION
34
SECURING THE TV TO THE WALL TO PREVENT FALLING 
WHEN THE TV IS USED ON A STAND
 We recommend that you set u\b the TV close to a wall so it cannot fall over if \bushed backwards. 
 Additionally\f we recommend that the TV be attached to a wall so it cannot be \bulled in a forward 
direction\f \botentially causing injury or damaging the \broduct. 
 Caution: Please make sure that children don’t climb on or hang from the TV. 
ꔛ Insert the eye-bolts (or TV brackets and bolts) to...

35
PREPARATION
ANTENNA OR CABLE CONNECTION
ꔛ To \brevent damage do not connect to the \bower outlet until all connections are made between the 
devices.
ꔛ Image shown may differ from your TV.
1. An\fenna (Ana\bog or Digi\fa\b)
   Wall Antenna Socket or Outdoor Antenna without a Cable Box 
Connections.
 For o\btimum \bicture quality\f adjust antenna direction if needed.
2. Cab\be
Wa\b\b 
An\fenna  
Socke\f
Ou\fdoor 
An\fenna 
(VHF, UHF)
Cab\be TV 
Wa\b\b Jack
Mu\b\fi-fami\by Dwe\b\bings/Apar\fmen\fs...

EXTERNAL EQUIPMENT SETUP
EXTERNAL  EQUIPMENT  SETUP
36
HD RECEIVER SETUP
ꔛ	To	prevent	the 	equipment 	damage\f 	ne ver 	plug 	in 	any 	po wer 	\b ords 	until 	y ou 	ha ve 	finished 	\b onne\bting 	all 	
equipment.
ꔛ	IThis	part	of 	E XTERNAL 	E QUIPMENT 	SETUP 	mainly 	us e 	pi\btur e 	o f 	f or 	2 6LE5300/26LE5500.
Y\f CB/PB\f CR/PR
1. How to connect
1Conne\bt	the	video 	output s 	(Y\f	PB\f	PR)	of	the 	
digital	set-top 	bo x 	t o 	the 	COMPONENT  IN 
VI\fEO 
or	1/2* ja\bks	on 	the 	T V. 	Ma t\bh 	the...

37
EXTERNAL  EQUIPMENT  SETUP
HDMI Connection
1. How to connect
1Conne\bt	the	digital 	s et-top 	bo x 	t o 	H\fMI/\fVI IN 
1
\f	2\f	3*\f	or 	4** ja\bk	on 	the 	 TV.
\bNo	separate 	audio 	\b onne\btion 	is 	ne\b essary.
HDMI	supports	bo th 	audio 	and 	video .
2. How to use
ꔛ		Turn	on	the 	digital 	s et-top 	bo x. 	
				(Refer	to	the 	o wner’s 	manual 	f or 	the 	digital 	s et-
top	box.)	
ꔛ	Sele\bt	the	H\fMI1\f	H\fMI2\f	H\fMI3*\f	or	H\fMI4 ** 
input	sour\be 	on 	the 	 TV 	using 	the 	INP\bT	button	
on	the...

EXTERNAL EQUIPMENT SETUP
EXTERNAL  EQUIPMENT  SETUP
38
DVI to HDMI Connection
1. How to connect
1Conne\bt	the	D VI 	output 	o f 	the 	digital 	s et-top 	
box	to	the 	H\fMI/\fVI IN 1	or	2*	ja\bk 	on 	the 	T V.
\bConne\bt	the	digital 	s et-top 	bo x 	audio 	output 	t o 	
the	A\b\fIO IN (
RGB/\fVI )	ja\bk
	on 	the 	 TV.
2. How to use
ꔛ		Turn	on	the 	digital 	s et-top 	bo x. 	
				(Refer	to	the 	o wner’s 	manual 	f or 	the 	digital 	s et-
top	box.)	
ꔛ		Sele\bt	the	H\fMI1	or	H\fMI2*	input 	sour\be 	on 	the...

39
EXTERNAL  EQUIPMENT  SETUP
DVD SETUP
Component Input ports
To get better picture quality\f connect a DVD 
player to the component input ports as shown 
below.
1. How to connect
1Conne\bt	the	video 	output s 	(Y\f	PB\f	PR)	 	of	the 	
DVD	to	the 	COMPONENT  IN  VI\fEO or	1/2* 
ja\bks	on	the 	T V. 	Ma t\bh 	the 	ja\bk 	\b olors 	(Y	=	
green\f	PB	=	blue\f 	and 	PR	=	red)
.
\bConne\bt	the 	audio 	output s 	o f 	the 	D VD 	t o 	the 	
COMPONENT  IN  A\b\fIO or	1/2* ja\bks	on	the 	
TV.
2. How to use
ꔛ	Turn	on...

EXTERNAL EQUIPMENT SETUP
EXTERNAL  EQUIPMENT  SETUP
40
Composite (RCA) Connection
1. How to connect
1Conne\bt	the	A\b\fIO/VI\fEO	ja\bks between	TV	
and	DVD.	Ma t\bh 	the 	ja\bk 	\b olors 	( Video 	= 	y ellow\f 	
Audio	Left	= 	whit e\f 	and 	A udio 	Right 	= 	r ed)
2. How to use
ꔛ	Turn	on	the 	D VD 	play er\f 	ins ert 	a 	D VD.
ꔛ	Sele\bt	the	AV or	AV1/2*	input	sour\be 	on 	the 	T V 	
using	the	INP\bT	button	on 	the 	r emote 	\b ontrol. 		
ꔛ	Refer	to	the 	D VD 	play er's 	manual 	f or 	oper ating...