LG 22LG3060 Owners Manual

							
29
EXTERNAL EQIPMENT SETUP
NOTE
!

GTo enjoy vivid picture and sound, connect a PC to
the TV.
GAvoid keeping a fixed image on the TV’s screen for
prolonged periods of time. The fixed image may
become permanently imprinted on the screen; use
a screen saver when possible.
GConnect the PC to the RGB (PC) or HDMI IN (or
HDMI/DVI IN) port of the TV; change the 
resolution.
GThere may be interference relating to resolution,
vertical pattern, contrast or brightness in PC
mode. Change the PC mode to another resolution
or change the refresh rate to another rate or
adjust the brightness and contrast on the menu
until the picture is clear. If the refresh rate of the
PC graphic card can not be changed, change the
PC graphic card or consult the manufacturer of
the PC graphic card.
GThe synchronization input waveform for
Horizontal and Vertical frequencies are separate.
GConnect the signal cable from the monitor output
port of the PC to the RGB (PC) port of the TV or
the signal cable from the HDMI output port of the
PC to the HDMI IN (or HDMI/DVI IN) port on the
TV.
GConnect the audio cable from the PC to the Audio
input on the TV. (Audio cables are not included
with the TV).
GIf using a sound card, adjust PC sound as required.
GThis TV uses a VESA Plug and Play Solution. The
TV provides EDID data to the PC system with a
DDC protocol. The PC adjusts automatically when
using this TV.
GDDC protocol is preset for RGB (Analog RGB),
HDMI (Digital RGB) mode.
GIf required, adjust the settings for Plug and Play
functionality.
GIf the graphic card on the PC does not output 
analogue and digital RGB simultaneously, connect
only one of either RGB or HDMI IN (or HDMI/DVI
IN) to display the PC output on the TV.
GIf the graphic card on the PC does output 
analogue and digital RGB simultaneously, switch
the TV to either RGB or HDMI; (the other mode is
set to Plug and Play automatically by the TV.)
GDOS mode may not work depending on the video
card if you use a HDMI to DVI cable.
GIf you use too long an RGB-PC cable, there may be
interference on the screen. We recommend using
under 5m of cable. This provides the best picture
quality.

DVI-PC OUTPUTAUDIO
HDMI/DVI INAUDIO IN
(RGB/DVI)

Connecting with a HDMI to DVI cable
Connect the DVI output of the PC to the  H
H
D
D M
M I
I/
/ D
D V
VI
I 
 I
I N
N
,
H
H D
D M
M I
I/
/ D
D V
VI
I 
  I
IN
N  
 1
1 (
(D
D V
VI
I)
)
or  H
H
D
D M
M I
I/
/ D
D V
VI
I 
  I
IN
N  
 1
1  
 
jack on
the TV.
Connect the PC audio output to the  A A
U
U D
D I
IO
O  
 I
IN
N
(
( R
R G
G B
B/
/D
D V
VI
I)
)
jack on the TV.
Turn on the PC and the TV.
Select  HDMI/DVI or HDMI 1 input source using the
I I N
N P
PU
U T
T
button on the remote control.
2
3
4
1
12
 Ofrecido por www.electromanuales.com
 
						

							
30
EXTERNAL EQIPMENT SETUP
70.08
59.94
75.00 60.31
75.00 74.55
60.00 70.00
75.029 59.8759.8
59.6
60.0
59.90
59.948 59.94
Resolution
640x480
800x600 832x624
720x400
1024x768 Horizontal
Frequency(kHz) Vertical
Frequency(Hz)
1280x768
1360x768
1366x768
1280x1024
1440x900
1400x1050 1680x1050
Only 19LS4D *
Only 22LS4D *
EXTERNAL EQUIPMENT SETUP
Supported Display Resolution(Only 19/22LS4D *)
RGB[PC], HDMI[PC] mode
HDMI[DTV] mode
59.94
6050
50
59.94 60
59.94 60
50.00 23.97 24
29.976 30.00 50
59.94 60
31.469
31.5
31.25
37. 50 0 44.96 45
33.72 33.75
28.125 26.97 27
33.716 33.75
56.250 67. 4367. 5
Resolution
720x480720x576
1920x1080 1280x720
Horizontal
Frequency(kHz) Vertical
Frequency(Hz)
31.468
31.469
37. 68437. 879
46.875
49.725
48.363 56.470 60.123 47. 78
47. 72
47. 56
63.595 55.5
64.744 65.16
 Ofrecido por www.electromanuales.com
 
						

							
31
EXTERNAL EQIPMENT SETUP
Supported Display Resolution
(Only 19/22/26/32/37/42LG30
**, 32/37/42LG20
**, 32/37/42/47/52LG5
***)
70.08
59.94
75.00 60.31
75.00 74.55
60.00 70.00
75.029 59.8759.8
59.6
59.90
59.948 59.9460.0
59.988
RGB[PC], HDMI[PC] mode
31.468
31.469 37. 68437. 879
46.875
49.725
48.363 56.470 60.123 47. 78
47. 72
47. 56 55.5
64.744 65.16
63.595
66.647
Resolution
640x480
800x600 832x624
720x400
1024x768 Horizontal
Frequency(kHz) Vertical
Frequency(Hz)
1280x768
1360x768
1366x768
1440x900
1400x1050
1680x1050
1280x1024
1920x1080
HDMI[DTV] mode
59.94 / 60 50
50
59.94 / 60
59.94 / 60 50.00
23.97 / 24
26.976 / 30.00 50
59.94 / 60
31.469 / 31.5
31.25
37. 50 0
44.96 / 45
33.72 / 33.75 28.125
26.97 / 27
33.716 / 33.75 56.250
67.43 / 67.5
Resolution
720x480720x576
1280x720
1920x1080 Horizontal
Frequency(kHz) Vertical
Frequency(Hz)
Supported Display Resolution(Only 42/50PG10 **, 42/50PG20
**, 42/50/60PG30
**)
70.08
59.94 60.31
60.00 59.87
59.80
59.988
RGB[PC], HDMI[PC] mode
31.468
31.469 37. 879
48.363 47. 78
47. 72
66.647
Resolution Horizontal
Frequency(kHz) Vertical
Frequency(Hz)
HDMI[DTV] mode
59.94
60.00 59.94
60.00 50.00
50.00 59.94
60.00 50.00 59.94
60.00 24.00 30
50.00 59.94 60
31.469
31.469
31.47
31.50 31.25 37. 50
44.96
45.00
28.125 33.7233.75
27.000 33.75
56.25
67. 433 67. 50
Resolution
640x480
720x480 720x576
1280x720
1920x1080 Horizontal
Frequency(kHz) Vertical
Frequency(Hz)
640x480
800x600 720x400
1024x768
1280x768
1360x768
1920x1080
Only 19LG30 **
Only 19LG30**, 37/42/47/52LG5
***
Only 37/42/47/52LG5 ***
Only 22LG30**
 Ofrecido por www.electromanuales.com
 
						

							
32
EXTERNAL EQIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
Screen Setup for PC mode
Returns to the default settings Position, Size and Phase at the factory.
This function works in the following mode : RGB[PC].
Screen Reset
1
Select PICTURE .
2
Select SCREEN .
3
Select Reset.
5
Run Reset .

• Contrast : 70
• Brightness : 50
• Sharpness : 50
• Colour : 50
• Tint : 0
• Advanced Control
• Picture Reset
PICTUREMove
OKD
Screen

To  S e t
Auto Config.
SCREENMove
Prev.RETURN

Resolution

Position

Size

Phase

ResetG

MENU

OK 

OK 

OK 

4
Select Ye s.
OK 

• Press the  MENUbutton to return to normal TV viewing.
• Press the  RETURNbutton to move to the previous menu screen.
 Ofrecido por www.electromanuales.com
 
						

							
33
EXTERNAL EQIPMENT SETUP
If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the
picture phase manually.
This function works in the following mode : RGB[PC].
Adjustment for screen Position, Size, Phase1
Select  PICTURE .
2
Select SCREEN .
3
Select Position , Size  or Phase .
4
Make appropriate adjustments.

• Contrast : 70
• Brightness : 50
• Sharpness : 50
• Colour : 50
• Tint : 0
• Advanced Control
• Picture Reset
PICTUREMove
OKD
Screen

Auto Config.
SCREENMove

Resolution

PositionG

Size

Phase

Reset

G
FD
E

MENU
OK 
OK 
Prev.RETURN
• Press the  MENUbutton to return to normal TV viewing.
• Press the  RETURNbutton to move to the previous menu screen.
 Ofrecido por www.electromanuales.com
 
						

							
34
EXTERNAL EQIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
To view a normal picture, match the resolution of RGB mode and selection of PC mode.
This function works in the following mode: RGB[PC] mode.
Selecting Resolution1
Select  PICTURE .
2
Select SCREEN .
3
Select Resolution .
4
Select the desired resolution.

• Contrast : 70
• Brightness : 50
• Sharpness : 50
• Colour : 50
• Tint : 0
• Advanced Control
• Picture Reset
PICTUREMove
OKD
Screen

10 2 4  x  7 6 8
12 8 0  x  7 6 8
13 6 0  x  7 6 8
13 6 6  x  7 6 8
Auto Config.
SCREENMove

ResolutionG

Position

Size

Phase

Reset

MENU
OK 
OK 
• Press the MENUbutton to return to normal TV viewing.
• Press the  RETURNbutton to move to the previous menu screen.
Prev.RETURN
Except for PLASMA TV
 Ofrecido por www.electromanuales.com
 
						

							
35
EXTERNAL EQIPMENT SETUP
1
Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still
not correct, your TV is functioning properly but needs further adjustment.A A u
ut
to
o  
 c
c o
o n
nf
fi
ig
g u
u r
re
e
This function is for automatic adjustment of the screen position, clock, and phase The displayed image will
be unstable for a few seconds while the auto configuration is in progress.
Auto Configure (RGB [PC] mode only)
• Press the  MENUbutton to return to normal TV viewing.
• Press the  RETURNbutton to move to the previous menu screen.
•If the position of the image is still not correct,
try Auto adjustment again.
•If picture needs to be adjusted again after Auto
adjustment in RGB (PC), you can adjust the
P P o
o s
si
it
t i
io
o n
n
, S
S
i
iz
z e
e  
 
or  P
P
h
ha
as
se
e
.
Select  PICTURE .
2
Select SCREEN .
3
Select Auto Config. .

• Contrast : 70
• Brightness : 50
• Sharpness : 50
• Colour : 50
• Tint : 0
• Advanced Control
• Picture Reset
PICTUREMove
OKD
Screen

To  S e t
Auto Config.G
SCREENMove

Resolution

Position

Size

Phase

Reset

MENU
OK 
OK 
Prev.RETURN
5
Run Auto Config. .OK 
4
Select Ye s.OK 
 Ofrecido por www.electromanuales.com
 
						

							
36
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
REMOTE CONTROL KEY FUNCTIONS (Only 19/22LS4D*)
When using the remote control, aim it at the remote control sensor on the TV.

OK 
MENUAV MODE
GUIDE
RATIO
123
456
789
0
Q.VIEWLIST
TV INPUTD/A
POWER
VOL PR
INDEX
SLEEP
HOLDREVEAL
SUBTITLEUPDATE
I/IIMUTETEXT
RETURNEXIT
FAV
TIME
INFO   i
TV/RADIO
*
?

POWER
D/A INPUT
INPUT Switches the TV on from standby or off to standby.
Selects digital or analogue mode.
Switches the TV on from standby.
External input mode rotate in regular sequence.
Switches the TV on from standby.
TV/RADIO
I/II
MUTESelects Radio or TV channel in digital mode.
Selects the sound output.
Switches the sound on or off.
0 ~9 number
button
LIST
Q.VIEWSelects a programme.
Selects numbered items in a menu.
Displays the programme table.
Returns to the previously viewed programme.
MENU
AV MODE
INFO  i  GUIDE
THUMBSTICK
(Up/Down/Left Right)
OK
Selects a menu.
It helps you select and set images and sounds when con-
necting AV devices.
Shows the present screen information.
Shows programme schedule.
Allows you to navigate the on-screen menus and adjust
the system settings to your preference.
Accepts your selection or displays the current mode.
VOLUME UP /DOWN
RETURN(EXIT)
*
FAV
Programme UP/DOWNAdjusts the vol ume.
Allows the user to move back one step in an interactive
application, EPG or other user interaction function.
No function
Displays the selected favourite programme.
Selects a programme.
 Ofrecido por www.electromanuales.com
 
						

							
37
WATCHING TV / PROGRAMME CONTROL

Installing Batteries
■ Open the battery compartment cover on the back and install the
batteries matching correct polarity (+with +,-with -). 
■Install two 1.5V AAA batteries. Do not mix old or used batteries
with new ones.
■Close cover.

OK 
MENUAV MODE
GUIDE
RATIO
123
456
7890
Q.VIEWLIST
TV INPUTD/A
POWER
VOL PR
INDEX
SLEEP
HOLDREVEAL
SUBTITLEUPDATE
I/IIMUTETEXT
RETURNEXIT
FAV
TIME
INFO   i
TV/RADIO
*
?

Coloured buttons These buttons are used for teletext (on 
T
T
E
EL
LE
E T
T E
EX
X T
T
models only) or  P
P
r
ro
o g
gr
ra
a m
m m
me
e 
 e
e d
d i
it
t
.
TELETEXT
BUTTONS These buttons are used for teletext.
For further details, see the ‘Teletext’ section.
1
1
1
RATIO
SLEEP
SUBTITLE Selects your desired picture format.
Sets the sleep timer.
Recalls your preferred subtitle in digital mode.
 Ofrecido por www.electromanuales.com
 
						

							
38
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL

OK 
RETURN
EXIT
Q.MENU
MENU
RATIO
123
456
789
0
Q.VIEWLIST
INPUTTV/RAD
POWER
P
TEXTAV MODE
FAV
MARK
MUTE*
GUIDE
T.OPTSUBTITLE*

POWER
INPUT
TV/RAD Switches the TV on from standby or off to standby.
External input mode rotate in regular sequence.
Switches the TV on from standby.
Selects Radio or TV channel in digital mode.
GUIDE
INFO  i  
TELETEXT BUTTONS
AV MODEShows programme schedule.
Shows the present screen information.
These buttons are used for teletext.
For further details, see the ‘Teletext’ section.
It helps you select and set images and sounds when
connecting AV devices.
0 ~9 number
button
LIST
Q.VIEWSelects a programme.
Selects numbered items in a menu.
Displays the programme table.
Returns to the previously viewed programme.
MENU
Q.MENU
THUMBSTICK
(Up/Down/Left Right)
OK
RETURN(EXIT)
RATIOSelects a menu.
Clears all on-screen displays and returns to TV viewing
from any menu.
Select the desired quick menu source.
Allows you to navigate the on-screen menus and adjust
the system settings to your preference.
Accepts your selection or displays the current mode.
Allows the user to move back one step in an interactive
application, EPG or other user interaction function.
Selects your desired picture format.
1
1
1
(Only 42/50PG10
**)
 Ofrecido por www.electromanuales.com