Lexmark Z735 User Manual

							Printing a poster
31
If you formatted your handouts to print on both sides of the page, continue printing your handouts.
1After the first half of your handouts prints, your printer software prompts you to reload the 
paper. Insert the paper and reloading instruction page with the printed side facing away from 
you and the arrows pointing down into the paper support.  
2Click Continue Printing.
If you do not want to print the reloading instruction page:
1From the Print Properties dialog box, click Options  Style Options.
2Clear the Print instruction page to assist in reloading check box.
3Click OK.
Printing a poster
You can enlarge a single page image to print on multiple pages. For example, you can enlarge a 
photograph to print as a four-, nine-, or 16-page poster. 
Print up to 100 sheets of paper at a time, depending on the thickness of the paper.
Downloaded From ManualsPrinter.com Manuals 
						

							Printing a poster
32
Step 1: Load the paper
Load the paper vertically against the right side of the paper support.  
Make sure the print side is facing you.
Do not force the paper into the printer.
Squeeze and slide the paper guide to the left side of the paper.
Note:If you are using letter size paper, adjusting the paper guide may not be necessary.
Note:For the best print quality, use a heavier weight paper.
Step 2: Customize the print settings
1With your document open, click File  Print.
The Print dialog box appears.
2From the Print dialog box, click Properties, Preferences, or Options
3Select a print layout:
aFrom the Print Properties dialog box, select the Print Layout tab.
bFrom the Layout area, select Poster.
Downloaded From ManualsPrinter.com Manuals 
						

							Printing a poster
33 4
Select your poster size:
aSelect the size of your poster: 2 x 2 (four pages total), 3 x 3 (nine pages total), or 4 x 4 (16 
pages total).
bSelect Print Crop Marks if you want help cutting the edges of your pages. 
5If you need to reprint a selection of pages: 
aClick Select Pages To Print...
The pages that are not going to print have a circle and a bar symbol over the number and 
are shaded. Select or clear each page by clicking it. 
bClick OK.
6Click OK.
Step 3: Print your poster
Click OK.
Assemble your poster
1On each printed page, trim the white edges from two adjacent sides.
For example, trim the white edge from the top and left sides of each page. 
2Arrange the pages so that every trimmed edge overlaps an untrimmed edge (the white edge).
3Tape the backs of the pages together.
4To complete your poster, trim any remaining white edges.
Printed pages 
with the white 
edge trimmed 
from two 
adjacent sidesTrimmed edges
Untrimmed 
edges
Downloaded From ManualsPrinter.com Manuals 
						

							Printing iron-on transfers
34
Printing iron-on transfers
You can load up to 100 iron-on transfers at a time, depending on the thickness of the transfers. You 
may want to print on plain paper before loading your iron-on transfers.
Note:For best results, load one iron-on transfer at a time.
Step 1: Load the iron-on transfers
If your iron-on transfers include instructions, read them carefully.
Load the iron-on transfers vertically against the right side of the paper support.  
Make sure the print side (blank side) is facing you.
Do not force the iron-on transfers into the printer.
Downloaded From ManualsPrinter.com Manuals 
						

							Printing transparencies
35
Squeeze and slide the paper guide to the left side of the iron-on transfers.
Note:If you are using letter size iron-on transfers, adjusting the paper guide may not be 
necessary.
Step 2: Customize the print settings
1With your document open, click File  Print.
The Print dialog box appears.
2From the Print dialog box, click Properties, Preferences, or Options.
3If your software program does not have mirror or iron-on settings, select a print layout:
aFrom the Print Properties dialog box, select the Print Layout tab.
bFrom the Layout area, select Mirror.
4Click OK.
Step 3: Print your iron-on transfer
Click OK.
Note:To prevent smudging, remove each iron-on transfer as it exits the printer, and then 
let it dry before stacking.
Printing transparencies
You can load up to 20 transparencies at a time, depending on the thickness of the transparencies.
Step 1: Load the transparencies
Use transparencies designed for inkjet printers.
Downloaded From ManualsPrinter.com Manuals 
						

							Printing transparencies
36
If your transparencies include instructions, read them carefully.
Load the transparencies vertically against the right side of the paper support.  
Make sure the rough side (print side) of the transparencies is facing you. If the transparencies 
have a removable stripe, make sure each stripe is facing away from you and down toward the 
printer.
Do not force the transparencies into the printer.
Squeeze and slide the paper guide to the left side of the transparencies.
Note:If you are using letter size transparencies, adjusting the paper guide may not be 
necessary.
Step 2: Customize the print settings
1With your document open, click File  Print.
The Print dialog box appears.
2From the Print dialog box, click Properties, Preferences, or Options.
3Select a paper size:
aFrom the Print Properties dialog box, select the Paper Setup tab.
bFrom the Paper Size area, select Paper.
Downloaded From ManualsPrinter.com Manuals 
						

							Printing your document in reverse order
37
cFrom the Paper Size menu, select A4 or Letter.
4Click OK.
Step 3: Print your transparencies
Click OK.
Note:To prevent smudging, remove each transparency as it exits the printer, and then let 
it dry before stacking.
Printing your document in reverse order
You can load up to 100 sheets of paper at a time, depending on the thickness of the paper.
Step 1: Load the paper
Load the paper vertically against the right side of the paper support.  
Make sure the print side is facing you.
Do not force the paper into the printer.
Downloaded From ManualsPrinter.com Manuals 
						

							Printing your document in reverse order
38
Squeeze and slide the paper guide to the left side of the paper.
Note:If you are using letter size paper, adjusting the paper guide may not be necessary.
Step 2: Customize the print settings
1With your document open, click File  Print.
The Print dialog box appears.
2From the Print dialog box, click Properties, Preferences, or Options.
3To print the last page first:
aFrom the Print Properties dialog box, select the Quality/Copies tab.
bSelect Print Last Page First.
4Follow the steps for your paper type to further customize your document.
5Click OK.
Step 3: Print your document
Click OK.
Note:The paper exit tray holds up to 50 sheets of plain paper. If you want to print more, 
remove the first 50 sheets from the paper exit tray before the others print.
Downloaded From ManualsPrinter.com Manuals 
						

							Printing a banner
39
Printing a banner
You can load up to 20 sheets of banner paper at a time.
Step 1: Load the banner paper
1Remove any paper from the printer.
2Place a stack of banner paper with only the number of sheets you need to print your banner 
behind the printer.
Note:Loading excess banner paper may cause a paper jam. For help, see “Printer has a 
paper jam” on page 60.  
3Load the leading edge of the banner paper into the printer against the right side of the paper 
support. 
Downloaded From ManualsPrinter.com Manuals 
						

							Printing a banner
40 4
Squeeze and slide the paper guide to the left edge of the banner paper.
Note:If you are using letter size banner paper, adjusting the paper guide may not be 
necessary.
Step 2: Customize the print settings
1With your document open, click File  Print.
The Print dialog box appears.
2From the Print dialog box, click Properties, Preferences, or Options.
3Select a banner size:
aFrom the Print Properties dialog box, select the Paper Setup tab.
bFrom the Paper Size area, select Banner.
cFrom the Banner Size menu, select A4 or Letter.
4Select the orientation:
aFrom the Print Properties dialog box, select the Paper Setup tab.
bFrom the Orientation area, select Por trait or Landscape.
5Select a print layout:
aFrom the Print Properties dialog box, select the Print Layout tab.
bFrom the Layout area, select Banner.
6Click OK.
Step 3: Print your banner
Click OK.
Downloaded From ManualsPrinter.com Manuals