Lexmark Z735 User Manual
Here you can view all the pages of manual Lexmark Z735 User Manual. The Lexmark manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 41
Printing on custom size paper 41 Printing on custom size paper You can load up to 100 sheets of custom size paper at a time, depending on the thickness of the paper. Step 1: Load the custom size paper Make sure your paper size fits within these dimensions: –Width: 76 to 216 mm (3 to 8.5 in.) –Length: 127 to 432 mm (5 to 17 in.) Load the paper vertically against the right side of the paper support. Make sure the print side is facing you. Do not force the paper into the printer. Squeeze and slide...
Page 42
Printing on custom size paper 42 2 From the Print dialog box, click Properties, Preferences, or Options. 3Create a custom paper size: aFrom the Print Properties dialog box, select the Paper Setup tab. bFrom the Paper Size menu, select Custom Size. A dialog box displays on the screen. cFrom the Units area, select Millimeters or Inches. dType the dimensions for your custom paper size. eClick OK. 4Continue to customize your document based on your paper type. Step 3: Print your document Click OK. Downloaded...
Page 43
Contents 3 Contents Chapter 1: Printer overview .......................................................... 5 Understanding the printer parts ...................................................................... 5 Using memory cards (Lexmark P700 Series only) ......................................... 7 Using the printer software .............................................................................. 8 Using the paper type sensor...
Page 44
Replacing the print cartridges 44 3 Pull the cartridges toward you until you hear a snap. 4Remove the used cartridges. Store them in an airtight container or dispose of them properly. Downloaded From ManualsPrinter.com Manuals
Page 45
Replacing the print cartridges 45 Installing the cartridges 1If you are installing new cartridges, remove the sticker and transparent tape from the back and bottom of the cartridges Warning:Do not touch or remove the gold contact areas on the back and bottom of the cartridges. 2Insert the color cartridge in the left carrier. Insert the black or photo cartridge in the right carrier. Depending on the part numbers you use, the color of the cartridge tops may vary. Note:To extend the life of your color...
Page 46
Replacing the print cartridges 46 3 Snap the cartridges into place. 4Close the front cover. Note:The front cover must be closed to start a print job. Specifying cartridge settings in the printer software Before you specify the print cartridge settings in the printer software, install the cartridges. For help, see “Installing the cartridges” on page 45. 1Open the LSC. For help, see “Lexmark Solution Center” on page 11. 2From the Maintenance tab, click Install a new print cartridge. 3Select the type...
Page 47
Aligning the print cartridges 47 Aligning the print cartridges Typically, you only align print cartridges after installing or replacing a cartridge. However, you may also need to align cartridges when: Characters are not properly formed or are not aligned at the left margin. Vertical, straight lines are wavy. To align the cartridges: 1Load plain paper. 2Open the Lexmark Solution Center. For help, see page 11. 3From the Maintenance tab, click Align to fix the blurry edges. 4Click Print. The...
Page 48
Improving print quality 48 If your document still does not have the print quality you want, follow these steps: 1Reinsert the print cartridges: aRemove the print cartridges. For help, see page 43. bInsert the print cartridges. For help, see page 45. cPrint your document again. dIf print quality has not improved, continue with step 2. 2Clean the print nozzles: aLoad paper. For help, see page 13. bOpen the Lexmark Solution Center. For help, see page 11. cClick the Maintenance tab. dFrom the Maintenance...
Page 49
Preserving the print cartridges 49 dUsing another clean section of the cloth, gently hold the cloth against the contacts for about three seconds, and then wipe in the direction shown. eWith another clean section of the cloth, repeat step c through d. fAllow the nozzles and contacts to dry completely. gReinsert the print cartridges. hPrint your document again. iIf the print quality does not improve, repeat step 3 up to two more times. jIf print quality is still not satisfactory, replace the print...
Page 50
Ordering supplies 50 Ordering supplies To order supplies or locate a dealer near you, contact the Lexmark Web site at www.lexmark.com. Item:Part number: Black cartridge 48 50 55 Color cartridge 19 20 25 Photo cartridge 90 USB cable 12A2405 Downloaded From ManualsPrinter.com Manuals