Lexmark X925 Owners Manual

Part namePart numberWaste toner bottleC925X76GOrdering ADF replacement parts
Order ADF replacement parts if you experience problems with paper double-feeding or failing to feed through the ADF.
Part namePart numberADF separator roll40X6328ADF pick roll40X6327
Replacing Supplies
Replacing an imaging unit
1Open the front door.
Warning—Potential Damage: To avoid overexposing the imaging units, do not leave the door open for more than
10 minutes.
2Open the internal cover.
Maintaining the printer
11 

3Push the imaging unit lock lever up and pull out the imaging unit with the toner cartridge attached to it.
4Unpack the replacement imaging unit.
5Peel off the black protective sheet and the toner sealing tape.
6Insert the imaging unit into the printer until it clicks it into place.
7Using both hands, push the sides of the internal cover firmly until the cover clicks into place.
Maintaining the printer
12 

8Unpack the toner cartridge, and then shake it to redistribute the toner.
9Peel off the toner sealing tape.
10Insert the toner cartridge and turn the lock lever to the left.
11Close the front door.
Maintaining the printer
13 

Replacing a toner cartridge
1Open the front door.
Warning—Potential Damage: To avoid overexposing the imaging units, do not leave the door open for more than
10 minutes.
2Turn the toner lock lever to the right and pull the toner cartridge out.
3Unpack the toner cartridge, and then shake it to redistribute the toner.
Maintaining the printer
14 

4Peel off the toner sealing tape.
5Insert the new cartridge into the printer and then turn the toner lock lever to the left.
6Close the front door.
Maintaining the printer
15 

Replacing the waste toner bottle
1Turn the printer off.
2Open the front door.
3Open the internal cover.
4Pull out the used waste toner bottle.
5Unpack the new waste toner bottle.
Maintaining the printer
16 

6Insert the new waste toner bottle into the printer.
7Using both hands, push the sides of the internal cover firmly until it clicks into place.
8Close the front door.
9From the printer control panel, reset the Waste Toner Bottle counter in the Supplies menu.
Moving the printer
Before moving the printerCAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more trained
personnel to lift it safely.
CAUTION—POTENTIAL INJURY: Before moving the printer, follow these...

•Lift the printer off of the optional drawer and set it aside instead of trying to lift the drawer and printer at the same
time.
Note: Use the handholds located on both sides of the printer to lift it off the optional drawer.Warning—Potential Damage: Damage to the printer caused by improper moving is not covered by the printer warranty.Moving the printer to another location
The printer and options can be safely moved to another location by following these precautions:
•Any cart used to move the printer...