Lexmark X862de User Manual

Menu itemDescription
Portrait Width
3–17 inches
76–432 mmSets the portrait width
Notes:
If the width exceeds the maximum, the printer uses the maximum
width allowed.
11.69 inches is the US factory default setting. Inches can be
increased in 0.01‑inch increments.
297 mm is the international factory default setting. Millimeters can
be increased in 1‑mm increments.
Portrait Height
3–17 inches
76–432 mmSets the portrait height
Notes:
If the height exceeds the maximum, the printer uses the maximum
height...

Menu ItemDescription
Configure Bins
Mailbox
Link
Link Optional
Type AssignmentSpecifies configuration options for output bins
Notes:
Mailbox is the factory default setting.
Bins assigned the same name are automatically
linked unless Link Optional is selected.
The Mailbox setting treats each bin as a separate
mailbox.
The Link setting links together all available output
bins.
The Link Optional setting links together all available
output bins except the standard bin and appears only
when at least two...

Menu itemDescription
Network Setup PagePrints a report containing information about the network printer settings, such
as the TCP/IP address information
Note: This menu item appears only for network printers or printers connected
to print servers.
Network  Setup PagePrints a report containing information about the network printer settings, such
as the TCP/IP address information
Notes:
This menu item is available when more than one network option is
installed.
This menu item appears only for network...

Menu itemDescription
Asset ReportPrints a report containing asset information including the printer serial number
and model name. The report contains text and UPC barcodes that can be scanned
into an asset database.
Network/Ports menu
Active NIC menu
Menu itemDescription
Active NIC
Auto
Notes:
Auto is the factory default setting.
This menu item appears only if an optional network card is installed.
Standard Network or Network  menus
Note: Only active ports appear in this menu; all inactive ports are...

Menu itemDescription
Network Buffer
Auto
3K to Sets the size of the network input buffer
Notes:
Auto is the factory default setting.
The value can be changed in 1‑K increments.
The maximum size allowed depends on the amount of memory in the printer,
the size of the other link buffers, and whether Resource Save is set to On or
Off.
To increase the maximum size range for the Network Buffer, disable or
reduce the size of the parallel, serial, and USB buffers.
Changing this setting from the printer control...

Standard USB menu
Menu itemDescription
PCL SmartSwitch
On
OffSets the printer to automatically switch to PCL emulation when a print job received
through a USB port requires it, regardless of the default printer language
Notes:
On is the factory default setting.
When the Off setting is used, the printer does not examine incoming data.
When the Off setting is used, the printer uses PostScript emulation if the PS
SmartSwitch setting is On. It uses the default printer language specified in the
Setup menu if...

Menu itemDescription
Job Buffering
Off
On
AutoTemporarily stores jobs on the printer hard disk before printing
Notes:
Off is the factory default setting.
The On setting buffers jobs on the printer hard disk.
The Auto setting buffers print jobs only if the printer is busy processing data
from another input port.
Changing this setting from the printer control panel and then exiting the
menus causes the printer to restart. The menu selection is updated.
Mac Binary PS
Auto
Off
OnSets the printer to process...

Menu itemDescription
View Card SpeedLets you view the speed of a currently active network card
Network Address
UAA
LAALets you view the network addresses
Job Timeout
0‑225 secondsSets the amount of time in seconds that a network print job can take before it
is canceled
Notes:
90 seconds is the factory default setting.
A setting value of 0 disables the timeout.
If a value of 1–9 is selected, then the setting is saved as 10.
Banner Page
Off
OnAllows the printer to print a banner page
Note: Off is the...

Menu itemDescription
Enable BOOTP
On
OffSpecifies the BOOTP address assignment setting
Note: On is the factory default setting.
Enable AutoIP
Yes
NoSpecifies the Zero Configuration Networking setting
Note: Yes is the factory default setting.
Enable FTP/TFTP
Yes
NoEnables the built-in FTP server, which allows you to send files to the printer using the
File Transfer Protocol.
Note: Yes is the factory default setting.
Enable HTTP Server
Yes
NoEnables the built-in Web server (Embedded Web Server). When...

Wireless menu
Use the following menu items to view or configure the wireless internal print server settings.
Note: This menu is available only for models connected to a wireless network.
This menu is available from the Network/Ports menu:
Network/Ports > Network  > Net  Setup > Wireless
Menu itemDescription
Network Mode
Infrastructure
Ad hocSpecifies the network mode
Notes:
Infrastructure mode lets the printer access a network using an
access point.
Ad hoc is the factory default setting. Ad hoc mode...