Lexmark X464de User Manual

1USB port
2Ethernet port
Verifying printer setup
Once all hardware and software options are installed and the printer is turned on, verify that the printer is set up
correctly by printing the following:
Menu settings page—Use this page to verify that all printer options are installed correctly. A list of installed options
appears toward the bottom of the page. If an option you installed is not listed, then it is not installed correctly.
Remove the option and install it again.
Network setup page—If your...

Printing a network setup page
If the printer is attached to a network, then print a network setup page to verify the network connection. This page
also provides important information that aids network printing configuration.
1Make sure the printer is on and Ready appears.
2On the home screen, touch .
3Touch Reports.
4Touch Network Setup Page.
The network setup page prints and the printer returns to the home screen.
5Check the first section on the network setup page, and confirm that Status is...

Updating available options in the printer driver
Once the printer software and any options are installed, it may be necessary to manually add the options in the printer
driver to make them available for print jobs.
For Windows users
1Click , or click Start and then click Run.
2In the Start Search or Run box, type control printers.
3Press Enter, or click OK.
The printer folder opens.
4Select the printer.
Note: If the printer has a fax option, choose the appropriate printer model with the letters “PS.”...

Setting up wireless printing
Note: Wireless printing is not standard on all printer models.
Follow these steps to set up your printer
Note: Do not connect cables until instructed to do so.
1Set up the printer hardware. For more information, see the Setup Guide.
2Follow the instructions for your operating system:
Windows—See “Information you will need to set up the printer on a wireless network” on page 54 and
“Installing the printer on a wireless network (Windows)” on page 55.
Macintosh—See “Information...

–No security
If your wireless network does not use any type of security, then you will not have any security information.
Note: Using an unsecured wireless network is not recommended.
If you are installing the printer on an 802.1X network using the Advanced method, then you may need the following:
Authentication type
Inner authentication type
802.1X username and password
Certificates
Note: For more information on configuring 802.1X security, see the Networking Guide on the Software and
Documentation CD....

2From the printer control panel, select your language and country or region, and then touch Continue.
3Select your time zone, and then touch Continue.
4Deselect any function you plan to set up later, such as Fax or E‑mail, and then touch Continue.
5Select any additional buttons you want to display on the home screen, and then touch Continue.
6If Fax is enabled, then type in your Fax Station name and touch Enter. For more information on fax station name
and number, see your system support person; or touch...

15Remove the label covering the USB port on the back of the printer.
16Connect the cables in the following order:
aTemporarily connect a USB cable between the computer on the wireless network and the printer.
Note: After the printer is configured, the software will instruct you to disconnect the temporary USB cable
so you can print wirelessly.
bIf you plan to set up fax now, then connect the fax cables. See the Users Guide on the Software and
Documentation CD for help deciding how to connect the cables....

Installing the printer on a wireless network (Macintosh)
Before you install the printer on a wireless network, make sure that:
A wireless card is installed in your printer.
Your wireless network is set up and working properly.
The computer you are using is connected to the same wireless network where you want to set up the printer.
Prepare to configure the printer
1
Locate the printer MAC address on the sheet that came with the printer. Write the last six digits of the MAC address
in the space provided:...

6Select any additional buttons you want to display on the home screen, and then touch Continue.
7If Fax is enabled, type in your Fax Station name, and then touch Enter. For more information on fax station name
and number, see your system support person; or touch Back to go back and deselect Fax.
8If Fax is enabled, enter the Fax station (phone) number for this printer, and then touch Continue.
9If E‑mail is enabled, type in the Primary SMTP (mail server) Gateway address, and then touch Enter. For more...

Configure the printer for wireless access
1
Type the name of your network (SSID) in the appropriate field.
2Select Infrastructure as your Network Mode if you are using a wireless router.
3Select the type of security you use to protect your wireless network.
4Enter the security information necessary for the printer to join your wireless network.
5Click Submit.
6Open the AirPort application on your computer:
In Mac OS X version 10.5 or later
aFrom the Apple menu, choose System Preferences.
bClick Network....