Lexmark X2470 User Manual

Networking the printer
Installing a network printer lets users at different workstations print to a common printer.
Shared printing
Installing software and sharing the printer on the network (on the host computer)
1Connect the printer to a network computer using a USB cable.
If the Found New Hardware dialog appears, click Cancel.
2Insert the printer software CD.
3Click Install.
4Click Continue.
5Select Yes to share your printer.
6Assign a shared printer name.
7When prompted, select Test Page to make sure...

Maintaining the printer
Changing a print cartridge
Removing a used print cartridge
1Make sure the printer is on.
2Lift the scanner unit.
The print cartridge carrier moves and stops at the loading position, unless the printer is busy.
3Press down on the lever to raise the cartridge lid.
4Remove the used print cartridge.
To recycle the used cartridge, see “Recycling Lexmark products” on page 47.
Installing a print cartridge
1If you are installing a new print cartridge, remove the sticker and tape from the...

2Press down on the cartridge lever to raise the cartridge lid.
3Insert the cartridge.
4Close the lid.
5Lift the scanner unit, press the scanner support back until it slides into the slot, and close the scanner unit.
1
2 3
CAUTION: When closing the scanner unit, make sure to keep your hands out from underneath the scanner unit.
Note: The scanner unit must be closed to start a new scan, print, copy, or fax job.
6Press  for three seconds to print an alignment page.
7Follow the instructions on the computer...

Achieving better print quality
Improving print quality
If you are not satisfied with the print quality of a document, make sure you:
Use the appropriate paper for the document. Use Lexmark Premium Photo Paper if you are printing photos or
other high-quality images.
Make sure the glossy or printable side faces you. (If you are not sure which side is the printable side, see the
instructions that came with the paper.)
Use a paper that is a heavier weight or bright white.
Select a higher print quality.
If...

3Click the Maintain/Troubleshoot button.
4Click Maintenance.
5Click Clean to fix horizontal streaks.
6Click Print.
A page prints, forcing ink through the print cartridge nozzles to clean them.
7Print the document again to verify that the print quality has improved.
8If print quality has not improved, try cleaning the nozzles up to two more times.
Wiping the print cartridge nozzles and contacts
1Remove the print cartridge.
2Dampen a clean, lint-free cloth with water.
3Gently hold the cloth against the...

10Repeat step 9 up to two more times.
11If print quality is still not satisfactory, replace the print cartridge.
Preserving the print cartridge
Keep a new cartridge in its packaging until you are ready to install it.
Do not remove a cartridge from the printer except to replace, clean, or store it in an airtight container. The print
cartridge does not print correctly if left exposed for an extended period of time.
Cleaning the scanner glass
1Dampen a clean, lint-free cloth with water.
2Gently wipe the...

Refilling a print cartridge
The warranty does not cover repair of failures or damage caused by a refilled cartridge. Lexmark does not
recommend use of a refilled cartridge. Refilling a cartridge can affect print quality and may cause damage to the
printer. For best results, use Lexmark supplies.
Recycling Lexmark products
To return Lexmark products to Lexmark for recycling:
1Visit our Web site at www.lexmark.com/recycle.
2Follow the instructions on the computer screen.
 
47
Downloaded From...

Troubleshooting
“Setup troubleshooting” on page 48
“Print troubleshooting” on page 51
“Copy troubleshooting” on page 54
“Scan troubleshooting” on page 55
“Fax troubleshooting” on page 57
“Jams and misfeeds troubleshooting” on page 59
“Error messages” on page 60
“Removing and reinstalling the software” on page 61
Setup troubleshooting
“Power button is not lit” on page 48
“Software does not install” on page 48
“Page does not print” on page 49
“Cannot print from digital camera using PictBridge” on page 51...

1Check the USB cable for any obvious damage.
2Firmly plug the rectangular end of the USB cable into the USB port of the computer.
The USB port is marked with the 
 USB symbol.
3Firmly plug the square end of the USB cable into the back of the printer.
1Shut down and then restart your computer.
2Click Cancel on all New Hardware Found screens.
3Insert the CD, and then follow the instructions on the computer screen to reinstall the software.
1Press  to turn the printer off.
2Disconnect the power cord from...

Check the ink level, and install a new print cartridge if necessary.
1Remove the print cartridge.
2Make sure the sticker and tape have been removed.
3Reinsert the print cartridge.
Make sure the printer is set as the default printer and is not on hold or paused.
1Click:
In Windows XP Pro: Start ΠSettings ΠPrinters and Faxes.
In Windows XP Home: Start ΠControl Panel ΠPrinters and Faxes.
In Windows 2000: Start ΠSettings ΠPrinters.
In Windows 98/Me: Start ΠSettings ΠPrinters.
2Double-click the name...