Lexmark X203n User Manual

Menu itemDescription
Recycled
Paper
Card Stock
Transparency
Labels
Envelope
Rough/CottonAssign a paper type for the Recycled paper type loaded, and it will also be the
Recycled paper type in other menus.
Notes:
Paper is the factory default setting.
The Recycled type must be supported by the selected tray or feeder in
order for you to print from that source.
Custom Scan Sizes menu
Menu itemDescription
ID Card
Width
1–8.50 inches (25–216 mm)
Height
1–14 inches (25–356 mm)
Orientation
Portrait
Landscape
2...

Menu itemDescription
Custom Scan Size
Width
1–8.50 inches (25–216 mm)
Height
1–14 inches (25–356 mm)
Orientation
Portrait
Landscape
2 scans/side
Off
OnSpecifies a custom scan size name and options
Notes:
The display shows “Custom Scan Size” unless you have named the menu
item differently.
4.65 inches is the US factory default setting for Width for Size 1.
118 millimeters is the international factory default setting for Width for
Size 1.
8.5 inches is the US factory default setting for Width for Size 2....

Menu itemDescription
Portrait Height
3–14.17 inches
76–360 mmSets the portrait height
Notes:
If the height exceeds the maximum, then the printer uses the
maximum height allowed.
14 inches is the US factory default setting. Inches can be increased in
0.01‑inch increments.
356 mm is the international factory default setting. Millimeters can
be increased in 1‑mm increments.
Feed Direction
Short Edge
Long EdgeSpecifies the feed direction
Notes:
Short Edge is the factory default setting.
Long Edge appears...

Menu itemDescription
Asset ReportPrints a report containing asset information, including the printer serial number
and model name. The report contains text and UPC barcodes that can be scanned
into an asset database.
Settings menu
General Settings menu
Menu itemDescription
Display Language
English
Francais
Deutsch
Italiano
Espanol
Dansk
Norsk
Nederlands
Svenska
Portuguese
Suomi
Russian
Polski
Magyar
Turkce
Cesky
Simplified Chinese
Traditional Chinese
Korean
JapaneseSets the language of the text appearing...

Menu itemDescription
Quiet Mode
Off
OnReduces the amount of noise produced by the printer
Notes:
Off is the factory default setting.
On configures the printer to produce as little noise as
possible.
Run Initial setup
Yes
NoInstructs the printer to run the setup wizard
Notes:
Yes is the factory default setting.
After completing the setup wizard by selecting Done at the
Country select screen, the default setting becomes No.
Paper Sizes
U.S.
MetricSpecifies the printer factory default measurements. The...

Menu itemDescription
Timeouts
Print Timeout
Disabled
1–255Sets the amount of time in seconds the printer waits to receive an
end‑of‑job message before canceling the remainder of the print job
Notes:
90 seconds is the factory default setting.
When the timer expires, any partially printed page still in the
printer is printed, and then the printer checks to see if any
new print jobs are waiting.
Print Timeout is available only when using PCL or PPDS
emulation. This setting has no effect on PostScript...

Menu itemDescription
Paper Saver
Off
2 on 1 Portrait
2 on 1 Landscape
4 on 1 Portrait
4 on 1 LandscapeSets two or four sheets of an original document together on the same page
Note: Off is the factory default setting.
Print Page Borders
On
OffSpecifies whether a border is printed around the edge of the page at the margins
Note: Off is the factory default setting.
Collate
On
OffKeeps the pages of a print job stacked in sequence when making multiple copies of
the job
Note: On is the factory default...

Menu itemDescription
Scan edge to edge
On
OffSpecifies if the original document is scanned edge-to‑edge prior to copying
Note: Off is the factory default setting.
Sharpness
1–5Adjusts the sharpness of a copy
Note: 3 is the factory default setting.
Fax Settings menu
General Fax Settings
Menu itemDescription
Station NameSpecifies the fax station name of the printer
Station NumberSpecifies a fax number associated with the printer
Station ID
Station Name
Station NumberSpecifies how the printer is identified...

Menu itemDescription
Original Size
Mixed Sizes
Letter
Legal
Executive
Folio
Statement
A4
A5
JIS B5
Universal
4 x 6
3 x 5
Business Card
Oficio (Mexico)
ID Card
Custom Scan SizesSpecifies the paper size of the document that is being scanned
Note: Mixed Sizes is the US factory default setting. A4 is the international factory
default setting.
Content
Text
Text/Photo
PhotographSpecifies the type of content that will be scanned to fax
Notes:
Text is the factory default setting.
Text is used when the document...

Menu itemDescription
Driver to fax
Yes
NoAllows driver to fax jobs to be sent by the printer
Note: Yes is the factory default setting.
Dial Mode
Tone
PulseSpecifies the dialing sound, either as a tone or a pulse
Note: Tone is the factory default setting.
Max Speed
2400
4800
9600
14400
33600Specifies the maximum speed in baud at which faxes are sent
Note: 33600 baud is the factory default setting.
Background Removal
‑4 to +4Adjusts the amount of background visible on a copy
Note: 0 is the factory default...