Lexmark X 850 Owners Manual

Repair information4-323
7500-XXX
Exit 2 actuator removal 
1.Remove the exit 2 unit assembly. See “Exit 2 unit assembly removal” on page 4-315. 
2.Open the exit 2 unit assembly. 
3.Remove the exit 2 left cover. See “Exit 2 left cover removal” on page 4-319.
4.Remove the exit 2 right cover. See “Exit 2 right cover removal” on page 4-320.
5.Release the spring (A) on the exit 2 actuator (B). 
6.Move the exit 2 actuator (B) to the right in the direction of the arrow to release two hooks. 
7.Remove the exit 2...

4-324MFP Service Manual 7500-XXX
Exit 2 switch (exit 2 left door interlock) removal 
1.Remove the exit 2 unit assembly. See “Exit 2 unit assembly removal” on page 4-315.
2.Open the exit 2 unit assembly. 
3.Remove the exit 2 left cover. See “Exit 2 left cover removal” on page 4-319.
4.Remove the exit 2 right cover. See “Exit 2 right cover removal” on page 4-320.
5.Release the hooks securing the switch (exit 2 left door interlock) (A) to the exit 2 unit assembly.
6.Remove the switch (exit 2 door interlock)...

Repair information4-325
7500-XXX
7.Remove the connector from the exit 2 switch (exit 2 left door interlock) (A).
Note:  Before reinstalling the switch (exit 2 left door interlock) (A), ensure all the harnesses and connectors are 
properly installed. 
CONNECTOR
A
FRONT 

4-326MFP Service Manual 7500-XXX
Exit 2 media shift gear removal 
1.Remove the exit 2 unit assembly. See “Exit 2 unit assembly removal” on page 4-315.
2.Open the exit 2 unit assembly. 
3.Remove the exit 2 left cover. See “Exit 2 left cover removal” on page 4-319.
4.Remove the exit 2 right cover. See “Exit 2 right cover removal” on page 4-320.
5.Move the roll assembly (A) fully to the right (front). 
6.Lift the exit 2 media shift gear (B) upward to release it from the exit 2 unit assembly. 
7.Release the...

Repair information4-327
7500-XXX
Exit 2 media diverter solenoid removal 
1.Remove the exit 2 unit assembly. See “Exit 2 unit assembly removal” on page 4-315.
2.Open the exit 2 unit assembly. 
3.Remove the exit 2 left cover. See “Exit 2 left cover removal” on page 4-319.
4.Remove the exit 2 right cover. See “Exit 2 right cover removal” on page 4-320.
5.Disconnect the media diverter solenoid (A).
6.Release the harness from the clamp. 
7.Remove the screw securing the media diverter solenoid (A) to the exit...

4-328MFP Service Manual 7500-XXX
Exit 2 sensor (exit 2) removal 
1.Remove the exit 2 unit assembly. See “Exit 2 unit assembly removal” on page 4-315. 
2.Open the exit 2 unit assembly. 
3.Remove the exit 2 left cover. See “Exit 2 left cover removal” on page 4-319.
4.Remove the exit 2 right cover. See “Exit 2 right cover removal” on page 4-320.
5.Disconnect the connector from the sensor (exit 2) (A). 
6.Pull the exit 2 sensor (actuator) (B) back in the direction of the arrow. 
7.Release the hooks securing...

Repair information4-329
7500-XXX
Exit 2 sensor (exit 2 media shift HP) removal 
1.Remove the exit 2 unit assembly. See “Exit 2 unit assembly removal” on page 4-315.
2.Open the exit 2 unit assembly. 
3.Remove the exit 2 left cover. See “Exit 2 left cover removal” on page 4-319.
4.Remove the exit 2 right cover. See “Exit 2 right cover removal” on page 4-320.
5.Remove the exit 2 media shift gear. See “Exit 2 media shift gear removal” on page 4-326.
6.Rotate the shift assembly (A) upward in the direction of...

4-330MFP Service Manual 7500-XXX
Exit 2 sensor (standard bin full exit 2) removal 
1.Remove the exit 2 unit assembly. See “Exit 2 unit assembly removal” on page 4-315. 
2.Open the exit 2 unit assembly. 
3.Remove the exit 2 left cover. See “Exit 2 left cover removal” on page 4-319.
4.Remove the exit 2 right cover. See “Exit 2 right cover removal” on page 4-320.
5.Disconnect the sensor (standard bin full exit 2) (A). 
6.Release the hooks to the sensor (standard bin full exit 2) (A) from the exit 2 unit...

Repair information4-331
7500-XXX
Exit 2 cooling fan removal 
1.Remove the exit 2 unit assembly. See “Exit 2 unit assembly removal” on page 4-315. 
2.Open the exit 2 unit assembly. 
3.Remove the exit 2 left cover. See “Exit 2 left cover removal” on page 4-319.
4.Remove the exit 2 right cover. See “Exit 2 right cover removal” on page 4-320.
5.Disconnect the connector from the exit 2 cooling fan (A). 
6.Remove the harness from the hole in the exit 2 unit assembly. 
7.Remove the screw securing the exit 2...

4-332MFP Service Manual 7500-XXX