Lexmark T650dn User Manual

35 Insufficient memory to support Resource Save feature
Try one or more of the following:
Press the arrow buttons until Continue appears, and then press  to disable Resource Save and continue
printing.
To enable Resource Save after receiving this message, make sure the link buffers are set to Auto, and then exit the
menus to activate the link buffer changes. When Ready appears, enable Resource Save.
Install additional memory.
37 Insufficient memory for Flash Memory Defragment operation
Try one or more of...

39 Complex page, some data may not have printed
Try one or more of the following:
Press the arrow buttons until Continue appears, and then press  to clear the message and continue printing.
Cancel the current print job.
Install additional printer memory.
42.xy Cartridge region mismatch
Install a print cartridge that matches the region number of the printer. x indicates the value of the printer region. y
indicates the value of the cartridge region. x and y can have the following values:
1US
2 Europe, the...

53 Unformatted flash detected
Try one or more of the following:
Press the arrow buttons until Continue appears, and then press  to stop the defragment operation and
continue printing.
Format the flash memory. If the error message remains, the flash memory may be defective and require replacing.
54 Serial option  error
 is the number of the serial option.
Try one or more of the following:
Check that the serial cable is connected correctly and is the proper one for the serial port.
Check that the serial...

56 Parallel port  disabled
 is the number of the parallel port.
Try one or more of the following:
Press the arrow buttons until Continue appears, and then press  to clear the message.
The printer discards any data received through the parallel port.
Make sure the Parallel Buffer menu item is not set to Disabled.
56 Serial port  disabled
 is the number of the serial port.
Try one or more of the following:
Press the arrow buttons until Continue appears, and then press  to clear the message.
The printer...

58 Too many bins attached
1Turn the printer power off.
2Unplug the power cord from the wall outlet.
3Remove the additional bins.
4Connect the power cord to a properly grounded outlet.
5Turn the printer power back on.
58 Too many disks installed
1Turn the printer off.
2Unplug the power cord from the wall outlet.
3Remove the extra disks.
4Connect the power cord to a properly grounded outlet.
5Turn the printer back on.
58 Too many flash options installed
Too many optional flash memory cards or too many...

Try one or more of the following:
Remove the duplex unit.
Press  to clear the message and continue printing without using the duplex unit.
59 Incompatible envelope feeder
Only options designed specifically for this printer are supported.
Try one or more of the following:
Remove the envelope feeder.
Press  to clear the message and continue printing without using the envelope feeder.
59 Incompatible output bin 
Only options designed specifically for this printer are supported.
Try one or more of the...

80 Routine maintenance needed
The printer needs to have routine maintenance done. Order a maintenance kit, which contains all the items necessary
to replace the pick rollers, the charge roll, the transfer roller, and the fuser.
88 Cartridge low
The toner is low. Replace the print cartridge, and then press  to clear the message and continue printing.
88.yy Cartridge nearly low
The toner is low. Replace the print cartridge, and then press  to clear the message and continue printing.
88.yy Replace...

Maintaining the printer
Periodically, certain tasks are required to maintain optimum print quality.
Cleaning the exterior of the printer
1Make sure that the printer is turned off and unplugged from the wall outlet.
CAUTION—SHOCK HAZARD: To avoid the risk of electric shock when cleaning the exterior of the printer,
unplug the power cord from the wall outlet and disconnect all cables to the printer before proceeding.
2Remove paper from the standard exit bin.
3Dampen a clean, lint‑free cloth with water....

Checking the status of supplies
A message appears on the display when a replacement supply item is needed or when maintenance is required.
Checking the status of supplies from the printer control panel
1Make sure the printer is on and Ready appears.
2From the printer control panel, press the arrow buttons until  Status/Supplies appears, and then press
.
3Press the arrow buttons until  View supplies appears, and then press .
The status of each supply appears.
Checking the status of supplies from a network...

Recommended print cartridges
Part nameLexmark Return Program CartridgeRegular cartridge
For the US and Canada
Print Cartridge T650A11A T650A21A
High Yield Print Cartridge T650H11A T650H21A
Extra High Yield Print Cartridge* T654X11A T654X21A
High Yield Print Cartridge for Label
ApplicationsT650H04A Not applicable
Extra High Yield Print Cartridge for Label
Applications*T654X04A Not applicable
For Europe, the Middle East, and Africa
Print Cartridge T650A11E T650A21E
High Yield Print Cartridge T650H11E...