Lexmark E360d User Manual

							Menu itemDescription
Colored Texture
Smooth
Normal
RoughSpecifies the relative texture of the colored paper loaded
Note: Normal is the factory default setting.
Light Texture
Smooth
Normal
RoughSpecifies the relative texture of the paper loaded
Note: Normal is the factory default setting.
Heavy Texture
Smooth
Normal
RoughSpecifies the relative texture of the paper loaded
Note: Normal is the factory default setting.
Rough/Cotton Texture
RoughSpecifies the relative texture of the paper loaded
Note: Rough is the factory default setting.
Custom  Texture
Smooth
Normal
RoughSpecifies the relative texture of the custom paper loaded
Notes:
Normal is the factory default setting.
Settings appear only if the custom type is supported.
Paper Weight menu
Menu itemDescription
Plain Weight
Light
Normal
HeavySpecifies the relative weight of the paper loaded in a specific tray
Note: Normal is the factory default setting.
Card Stock Weight
Light
Normal
HeavySpecifies the relative weight of the card stock loaded in a specific tray
Notes:
Normal is the factory default setting.
Settings appear only if card stock is supported.
Transparency Weight
Light
Normal
HeavySpecifies the relative weight of the transparencies loaded in a specific tray
Note: Normal is the factory default setting.
Recycled Weight
Light
Normal
HeavySpecifies the relative weight of the recycled paper loaded in a specific tray
Note: Normal is the factory default setting.
Understanding printer menus
61
Downloaded From ManualsPrinter.com Manuals 
						

							Menu itemDescription
Labels Weight
Light
Normal
HeavySpecifies the relative weight of the labels loaded in a specific tray
Note: Normal is the factory default setting.
Bond Weight
Light
Normal
HeavySpecifies the relative weight of the paper loaded in a specific tray
Note: Normal is the factory default setting.
Envelope Weight
Light
Normal
HeavySpecifies the relative weight of the envelopes loaded in a specific tray
Note: Normal is the factory default setting.
Rough Envelope Weight
Light
Normal
HeavySpecifies the relative weight of the rough envelopes loaded in a specific tray
Note: Normal is the factory default setting.
Letterhead Weight
Light
Normal
HeavySpecifies the relative weight of the paper loaded in a specific tray
Note: Normal is the factory default setting.
Preprinted Weight
Light
Normal
HeavySpecifies the relative weight of the paper loaded in a specific tray
Note: Normal is the factory default setting.
Colored Weight
Light
Normal
HeavySpecifies the relative weight of the paper loaded in a specific tray
Note: Normal is the factory default setting.
Light Weight
LightSpecifies the relative weight of the paper loaded in a specific tray
Heavy Weight
HeavySpecifies the relative weight of the paper loaded in a specific tray
Rough/Cotton Weight
Light
Normal
HeavySpecifies the relative weight of the paper loaded in a specific tray
Note: Normal is the factory default setting.
Custom  Weight
Light
Normal
HeavySpecifies the relative weight of the custom paper type loaded in a specific tray
Notes:
Normal is the factory default setting.
Settings appear only if the custom type is supported.
Understanding printer menus
62
Downloaded From ManualsPrinter.com Manuals 
						

							Paper Loading menu
Menu itemDescription
Recycled Loading
Off
DuplexDetermines the paper loading direction for all jobs that specify
Recycled as the paper type
Note: Off is the factory default setting.
Bond Loading
Off
DuplexDetermines the paper loading direction for all jobs that specify Bond
as the paper type
Note: Off is the factory default setting.
Letterhead Loading
Off
DuplexDetermines the paper loading direction for all jobs that specify
Letterhead as the paper type
Note: Off is the factory default setting.
Preprinted Loading
Off
DuplexDetermines the paper loading direction for all jobs that specify
Preprinted as the paper type
Note: Off is the factory default setting.
Colored Loading
Off
DuplexDetermines the paper loading direction for all jobs that specify
Colored as the paper type
Note: Off is the factory default setting.
Light Loading
Off
DuplexDetermines the paper loading direction for all jobs that specify Light
as the paper type
Note: Off is the factory default setting.
Heavy Loading
Off
DuplexDetermines the paper loading direction for all jobs that specify Heavy
as the paper type
Note: Off is the factory default setting.
Custom  Loading
Off
DuplexDetermines the paper loading direction for all jobs that specify
Custom  as the paper type
Notes:
Off is the factory default setting.
Custom  Loading is available only if the custom type is
supported.
Notes:
Duplex determines how the paper is loaded.
If Duplex is selected, all print jobs are sent through the duplex unit, including 1‑sided jobs.
Understanding printer menus
63
Downloaded From ManualsPrinter.com Manuals 
						

							Custom Types menu
Menu itemDescription
Custom Type 
Paper
Card Stock
Transparency
Rough/Cotton
Labels
EnvelopeAssociates a paper or specialty media type with a factory default Custom
Type  name or a user‑defined Custom Name created from the Embedded
Web Server or MarkVision
TM Professional
Notes:
Paper is the factory default setting.
The custom media type must be supported by the selected tray or
multipurpose feeder in order to print from that source.
Recycled
Paper
Card Stock
Transparency
Rough/Cotton
Labels
EnvelopeSpecifies a paper type when the Recycled setting is selected in other menus
Notes:
Paper is the factory default setting.
The custom media type must be supported by the selected tray or
multipurpose feeder in order to print from that source.
Universal Setup menu
These menu items are used to specify the height, width, and feed direction of the Universal Paper Size. The Universal
Paper Size is a user‑defined paper size. It is listed with the other paper size settings and includes similar options, such
as support for duplex printing and printing multiple pages on one sheet.
Menu itemDescription
Units of Measure
Inches
MillimetersIdentifies the units of measure
Notes:
Inches is the US factory default setting.
Millimeters is the international factory default setting.
Portrait Width
3–14.17 inches
76–360 mmSets the portrait width
Notes:
If the width exceeds the maximum, then the printer uses the
maximum width allowed.
8.5 inches is the US factory default setting. Inches can be increased
in 0.01‑inch increments.
216 mm is the international factory default setting. Millimeters can
be increased in 1‑mm increments.
Understanding printer menus
64
Downloaded From ManualsPrinter.com Manuals 
						

							Menu itemDescription
Portrait Height
3–14.17 inches
76–360 mmSets the portrait height
Notes:
If the height exceeds the maximum, then the printer uses the
maximum height allowed.
14 inches is the US factory default setting. Inches can be increased in
0.01‑inch increments.
356 mm is the international factory default setting. Millimeters can
be increased in 1‑mm increments.
Feed Direction
Short Edge
Long EdgeSpecifies the feed direction
Notes:
Short Edge is the factory default setting.
Long Edge appears only if the longest edge is shorter than the
maximum length supported in the tray.
Reports menu
Reports menu
Menu itemDescription
Menu Settings PagePrints a report containing information about paper loaded into trays, installed
memory, the total page count, alarms, timeouts, the printer control panel
language, the TCP/IP address, the status of supplies, and the status of the network
connection
Device StatisticsPrints a report containing printer statistics such as supply information and details
about printed pages
Network Setup PagePrints a report containing information about the network printer settings, such
as the TCP/IP address information
Notes:
This menu item appears as Network  Setup Page when there is more
than one network option installed.
This menu item is available only on network printers or printers connected
to print servers.
Print Fonts
PCL Fonts
PostScript FontsPrints a report in English of all the fonts available for the printer language currently
set in the printer
Note: A separate list is available for PCL and PostScript emulations. Each
emulation report contains print samples and information about the available
fonts for each language.
Understanding printer menus
65
Downloaded From ManualsPrinter.com Manuals 
						

							Menu itemDescription
Print DirectoryPrints a list of all the resources stored on an optional flash memory card
Notes:
Job Buffer Size must be set to 100%.
The optional flash memory must be installed correctly and working
properly.
Asset ReportPrints a report containing asset information including the printer serial number
and model name. The report contains text and UPC barcodes that can be scanned
into an asset database.
Network/Ports menu
Network menu
Menu itemDescription
PCL SmartSwitch
On
OffSets the printer to automatically switch to PCL emulation when a print job requires
it, regardless of the default printer language
Notes:
On is the factory default setting.
When the Off setting is used, the printer does not examine incoming data.
When the Off setting is used, the printer uses PostScript emulation if PS
SmartSwitch is set to On. It uses the default printer language specified in the
Setup menu if PS SmartSwitch is set to Off.
PS SmartSwitch
On
OffSets the printer to automatically switch to PS emulation when a print job requires
it, regardless of the default printer language
Notes:
On is the factory default setting.
When the Off setting is used, the printer does not examine incoming data.
When the Off setting is used, the printer uses PCL emulation if PCL
SmartSwitch is set to On. It uses the default printer language specified in the
Setup menu if PCL SmartSwitch is set to Off.
NPA Mode
Auto
OffSets the printer to perform the special processing required for bidirectional
communication following the conventions defined by the NPA protocol
Notes:
Auto is the factory default setting
Changing this setting from the printer control panel and then exiting the
menus causes the printer to restart. The menu selection is updated.
Understanding printer menus
66
Downloaded From ManualsPrinter.com Manuals 
						

							Menu itemDescription
Network Buffer
Auto
DisabledSets the size of the network input buffer
Notes:
Auto is the factory default setting.
To increase the maximum size range for the Network Buffer, disable the USB
buffer.
Changing this setting from the printer control panel and then exiting the
menus causes the printer to restart. The menu selection is updated.
Mac Binary PS
Auto
On
OffSets the printer to process Macintosh binary PostScript print jobs
Notes:
Auto is the factory default setting.
The Off setting filters print jobs using the standard protocol.
The On setting processes raw binary PostScript print jobs.
Network Setup
Reports Menu
Network Card Menu
TCIP Menu
IPv6 Menu
Wireless Menu
AppleTalk MenuLists all the network setup menus, regardless of the active network of the printer
Note: Certain options are not available on selected printer models.
USB menu
Menu itemDescription
PCL SmartSwitch
On
OffSets the printer to automatically switch to PCL emulation when a print job received
through a USB port requires it, regardless of the default printer language
Notes:
On is the factory default setting.
When the Off setting is used, the printer does not examine incoming data.
When the Off setting is used, the printer uses PostScript emulation if the PS
Smartswitch setting is On. It uses the default printer language specified in the
Setup menu if the PS SmartSwitch setting is Off.
PS SmartSwitch
On
OffSets the printer to automatically switch to PS emulation when a print job received
through a USB port requires it, regardless of the default printer language
Notes:
On is the factory default setting.
When the Off setting is used, the printer does not examine incoming data.
When the Off setting is used, the printer uses PCL emulation if the PCL
Smartswitch setting is On. It uses the default printer language specified in the
Setup menu if the PCL SmartSwitch setting is Off.
Understanding printer menus
67
Downloaded From ManualsPrinter.com Manuals 
						

							Menu itemDescription
NPA Mode
Off
AutoSets the printer to perform the special processing required for bidirectional
communication following the conventions defined by the NPA protocol
Notes:
Auto is the factory default setting.
Changing this setting causes the printer to restart.
USB Buffer
Disabled
AutoSets the size of the USB input buffer
Notes:
Auto is the factory default setting.
The Disabled setting turns off job buffering. Any jobs already buffered are
printed before normal processing is resumed.
The maximum size allowed depends on the amount of memory in the printer,
the size of the other link buffers, and whether the Resource Save setting is On
or Off
Changing this setting causes the printer to restart.
Mac Binary PS
On
Off
AutoSets the printer to process Macintosh binary PostScript print jobs
Notes:
Auto is the factory default setting.
The Off setting filters print jobs using the standard protocol.
The On setting processes raw binary PostScript print jobs.
ENA Address
...Sets the network address information for an external print server that is attached to
the printer using a USB cable
Note: This menu item is available only if the printer is attached to an external print
server through the USB port.
ENA Netmask
...Sets the netmask information for an external print server that is attached to the printer
using a USB cable
Note: This menu item is available only if the printer is attached to an external print
server through the USB port.
ENA Gateway
...Sets the gateway information for an external print server that is attached to the printer
using a USB cable
Note: This menu item is available only if the printer is attached to an external print
server through the USB port.
Understanding printer menus
68
Downloaded From ManualsPrinter.com Manuals 
						

							Parallel menu
Menu itemDescription
PCL SmartSwitch
On
OffSets the printer to automatically switch to PCL emulation when a print job received
through a parallel port requires it, regardless of the default printer language
Notes:
On is the factory default setting.
When the Off setting is used, the printer does not examine incoming data.
When the Off setting is used, the printer uses PostScript emulation if PS
SmartSwitch is set to On. It uses the default printer language specified in the
Setup menu if PS SmartSwitch is set to Off.
PS SmartSwitch
On
OffSets the printer to automatically switch to PS emulation when a print job received
through a parallel port requires it, regardless of the default printer language
Notes:
On is the factory default setting.
When the Off setting is used, the printer does not examine incoming data.
When the Off setting is used, the printer uses PCL emulation if PCL SmartSwitch
is set to On. It uses the default printer language specified in the Setup menu if
PCL SmartSwitch is set to Off.
NPA Mode
Auto
OffSets the printer to perform the special processing required for bidirectional
communication following the conventions defined by the NPA protocol
Notes:
Auto is the factory default setting.
Changing this setting automatically resets the printer.
Parallel Buffer
Disabled
AutoSets the size of the parallel input buffer
Notes:
Auto is the factory default setting.
The Disabled setting turns off job buffering. Any jobs already buffered on the
disk are printed before normal processing is resumed.
The maximum size allowed depends on the amount of memory in the printer,
the size of the other link buffers, and whether Resource Save is set to On or
Off.
To increase the maximum size range for the Parallel Buffer, disable the USB and
network buffers.
Changing this setting automatically resets the printer.
Advanced Status
On
OffEnables bidirectional communication through the parallel port
Notes:
On is the factory default setting.
The Off setting disables parallel port negotiation.
Understanding printer menus
69
Downloaded From ManualsPrinter.com Manuals 
						

							Menu itemDescription
Protocol
Fastbytes
StandardSpecifies the parallel port protocol
Notes:
Fastbytes is the factory default setting. It provides compatibility with most
existing parallel ports and is the recommended setting.
The Standard setting tries to resolve parallel port communication problems.
Honor Init
Off
OnDetermines whether the printer honors printer hardware initialization requests from
the computer
Notes:
Off is the factory default setting.
The computer requests initialization by activating the Init signal from the
parallel port. Many personal computers activate the Init signal each time the
computer is turned on.
Parallel Mode 2
On
OffDetermines whether the parallel port data is sampled on the leading or trailing edge
of strobe
Note: On is the factory default setting.
Mac Binary PS
Auto
On
OffSets the printer to process Macintosh binary PostScript print jobs
Notes:
Auto is the factory default setting.
The Off setting filters print jobs using the standard protocol.
The On setting processes raw binary PostScript print jobs.
ENA Address
...Sets the network address, netmask, and gateway information for an external print
server that is attached to the printer using a parallel cable
Note: This menu is available only if the printer is attached to an external print
server through the parallel port.
ENA Netmask
...Sets the network address, netmask, and gateway information for an external print
server that is attached to the printer using a parallel cable
Note: This menu is available only if the printer is attached to an external print
server through the parallel port.
ENA Gateway
...Sets the network address, netmask, and gateway information for an external print
server that is attached to the printer using a parallel cable.
Note: This menu is available only if the printer is attached to an external print
server through the parallel port.
Understanding printer menus
70
Downloaded From ManualsPrinter.com Manuals