Lexmark E260 User Manual

Light sequenceWhat to do
Hex Trace Ready
 - Slowly Blinking
Use Hex Trace to troubleshoot
printing problems. Turn the printer
off, and then on to return to the
Ready state.
Busy
 - Blinking
Wait or press .
Flushing Buffer
 - Blinking
 - Blinking
Wait until the printer returns to the
Ready state.
Interpreting the printer control panel lights
31
Downloaded From ManualsPrinter.com Manuals 

Light sequenceWhat to do
Waiting
 - On
 - On
Wait for the light sequence to clear.
Canceling job
 - On
 - On
 - On
 - On
 - On
 - On
Wait for the light sequence to clear.
Invalid Engine Code or Invalid Network Code
 - On
 - On
Press  twice to get the secondary
message.
Use valid code when programming
the printer.
Interpreting the printer control panel lights
32
Downloaded From ManualsPrinter.com Manuals 

Light sequenceWhat to do
Not ready
 - On
Press and release either  or  to
return to the Ready state.
Cartridge error
 - On
 - On
Replace the toner cartridge with
one suitable for your region.
Note: This LED pattern also
indicates other problems with the
cartridge. Press 
 twice quickly to
see the secondary message. For
more information, see
“Understanding the secondary
error light sequences” on
page 36.
Front door is open
 - On
Close the front door.
Interpreting the printer control panel lights
33...

Light sequenceWhat to do
No paper in Tray 1 or Tray 2
 - On
 - On
Load paper in Tray 1 or Tray 2, and
then press 
 or .
No paper in the manual feeder
 - On
Load paper in the manual feeder.
Remove paper from the standard exit bin
 - Blinking
Remove printed pages from the
standard exit bin, and then press
and release 
 to clear the light
sequence and continue printing.
Interpreting the printer control panel lights
34
Downloaded From ManualsPrinter.com Manuals 

Light sequenceWhat to do
Cartridge is low
 - On
 - On
Press and release  to clear
the light sequence and continue
processing the print job.
With the printer turned off,
remove the toner cartridge and
shake it to extend its life.
Replace the toner cartridge,
and then turn the printer on.
PC Kit life warning
 - On
Press and release  to clear
the light sequence and continue
processing the print job.
Replace the photoconductor
kit.
The following light sequences show that there is a secondary error code or...

Light sequenceWhat to do
Paper jam
 - On
 - On
Press  twice quickly to see the
secondary paper jam code.
Understanding the secondary error light sequences
When the  and  lights are on simultaneously, press  twice quickly to see the secondary error code.
Printer control panelLights and buttons
1Error
2Jam
3Load paper
4Toner
5Ready
6Continue
7Stop
Interpreting the printer control panel lights
36
Downloaded From ManualsPrinter.com Manuals 

Light sequencesWhat you can do
Complex page, some data may not have printed
 - On
 - On
 - On
Press either  or  to clear the
light sequence.
Insufficient memory to collate job
 - On
 - On
 - On
Press  to print the remaining
pages of the job.
Insufficient memory to support Resource Save feature
 - On
 - Blinking
 - On
Install additional printer
memory.
Press either  or  to clear the
light sequence. Job will be
printed without Resource Save.
Interpreting the printer control panel lights
37
Downloaded From...

Light sequencesWhat you can do
Host interface disabled
 - On
 - Blinking
 - Blinking
 - On
Press  to clear the code. The
printer discards any print jobs
previously sent.
Paper size is small
 - On
 - On
 - On
 - On
Ensure that the paper you loaded
is large enough.
Clear any paper jam.
Press  to clear the code and
continue the print job.
Cartridge region mismatch
 - On
 - Blinking
 - On
Replace the toner cartridge with one
that is suitable for your region. For
more information, see “Replacing
the toner...

Light sequencesWhat you can do
Replace missing or defective cartridge
 - On
 - Blinking
 - On
Replace the toner cartridge. For
more information, see “Replacing
the toner cartridge” on page 86.
Cartridge part number not supported by device
 - On
 - On
 - On
Remove the toner cartridge and
replace it with a supported toner
cartridge. For more information, see
“Replacing the toner cartridge” on
page 86.
Interpreting the printer control panel lights
39
Downloaded From ManualsPrinter.com Manuals 

Loading paper and specialty media
This section explains how to load the 250- and 550-sheet trays, and the manual feeder. It also includes information
about setting the Paper Size and Paper Type.
Setting the paper size and type
Ensure that the settings for the trays reflect the size and type of paper loaded in the trays. The factory default paper
type setting is plain paper, so the paper type setting must be set manually for all trays that do not contain plain paper.
If the printer is on a network, access...