Lexmark E240n User Manual

51
Recognizing installed options
3Click FileÆ Properties.
4Click the Install Options tab.
5Add the appropriate options to your configuration:550-Sheet Tray—Select the option you installed from the 
Available options list, and click Add.
 Memory Card—Increase the printer memory to the appropriate number.
6Click OK.
Downloaded From ManualsPrinter.com Manuals 

52
7Using the operator panel
Overview of the operator panel
The operator panel has 5 lights and 2 buttons.
Note:The Continue button also functions as a light.
Press and release Continue to resume printing.
Press and release Continue  twice quickly to display a secondary error code.
Press and release Cancel  to cancel the job currently printing.
Press and hold Cancel  until all of the lights come on to reset the printer.
Ready
Toner Low / Replace PC Kit
Load Paper
Paper JamContinue
Cancel
Error...

53
Understanding the operator panel lights
Understanding the operator panel lights
The operator panel lights mean different things, depending on their sequence. Lights that are off, on, and/or blinking 
indicate printer conditions such as printer status, intervention, or service.
The following tables show the most common light sequences. Click the indicated page for more information on what it 
means.
Common light sequences
Printer conditionReady /
Power SaverBusyHex Trace ReadyWaitingFlushing /...

54
Understanding the operator panel lights
Common light sequences (continued)
Printer conditionphotoconductor kit life warningReplace photoconductorReplace photoconductor
(printer hard stop)Unsupported print cartridgeChange cartridge invalid refillCartridge region mismatchProgramming engine code /
Programming system codeCancel job / 
Reset printerService errorPrinter error *Paper jam printer error *
Page:6464656566666767686869
Continue
Ready
To n e r  L o w  /
Replace PC Kit
Load Paper
Paper Jam
Error
*...

55
Understanding the operator panel lights
Secondary errors
When the Error  and Continue  lights are both on, a secondary error has occurred. 
When the Paper Jam  and Continue  lights are both on, a paper jam secondary error has occurred. 
Press and release Continue twice quickly to display the secondary error code light sequence. The following table 
shows what these light sequences mean and where to go for help
.
Downloaded From ManualsPrinter.com Manuals 

56
Understanding the operator panel lights
Printer condition
Paper jam codes
Complex pageInsufficient printer memoryInsufficient collation areaFont errorPaper jam at the
input sensor *Paper jam in the
manual feederPaper jams as it exits
the tray into the printerPaper jams as a printed
job exits the printerPaper jam in Tray 1Paper jam in Tray 2
Page:717172727373747576
Continue
Ready
To n e r  L o w  /
Replace PC Kit
Load Paper
Paper Jam
Error
* Paper jams at the input sensor can be either after the paper...

57
Operator panel codes
Operator panel codes
Below are explanations of what the primary light sequences, or codes, and secondary error codes mean and what you can 
do to clear them.
Secondary Error codes (continued)
Printer conditionNetwork interface errorsError communicating
with the host computerHost interface disabledMemory fullShort paperInvalid engine codeInvalid network code
Page:7678787979
Continue
Ready
To n e r  L o w  /
Replace PC Kit
Load Paper
Paper Jam
Error
= On= BlinkingEmpty = Off...

58
Operator panel codes
Primary codes
Ready / Power Saver
Light sequence:
Ready—On
What this light sequence means:
The printer is ready to receive and process data.
The printer is in Power Saver mode.
What you can do:
Send a print job.
Press Continue to print the menu settings pages for a list of current 
printer settings.
Press and hold Cancel to reset the printer.
Note:If you want to change the Power Saver setting, it can only be 
set from the Local Printer Setup Utility (see Using the Local...

59
Operator panel codes
Busy
Hex Trace Ready
Light sequence:
Ready—Blink
What this light sequence means:
The printer is busy receiving and processing data or printing.
The printer is printing a directory, font list, menu settings pages, or Print 
Quality Test Pages.
What you can do:
Busy:
–Wait for the message to clear.
–Press and release Cancel to cancel the print job.
–Press and hold Cancel to reset the printer.
Printing a directory, a font list, menu settings pages, or Print Quality Test 
Pages:...

60
Operator panel codes
Wait ing
Flushing / Resolution reduced
Light sequence:
Continue—On
Ready—On
What this light sequence means:
The printer is waiting until a print timeout occurs, or until it receives additional data.
What you can do:
Press Continue to print the contents of the print buffer.
Press and release Cancel  to cancel the print job.
Press and hold Cancel to reset the printer.
Light sequence:
Ready—Blink
Error—Blink
What this light sequence means:
The printer is flushing corrupted...