Lexmark C935dn User Manual

Printing from a USB flash memory device
A USB Direct interface is located on the control panel. Insert a USB flash memory device to print supported file types.
Supported file types include: .pdf, .gif, .jpeg, .jpg, .bmp, .png, .tiff, .tif, .pcx, and .dcx.
Many USB flash memory devices are tested and approved for use with the printer. For more information, visit the
Lexmark Web site at www.lexmark.com.
Notes:
Hi‑Speed USB devices must support the Full‑speed standard. Devices only supporting USB Low‑speed...

3Press  until  appears next to the document you want to print, and then press .
Note: Folders found on the flash memory device appear as folders. File names are appended by the extension
type (for example, .jpg).
4Press  to print one copy, or enter the number of copies using the keypad, and then press  to initiate the
print job.
Note: Do not remove the USB flash memory device from the USB Direct interface until the document has
finished printing.
If you leave the USB flash memory device in the printer...

Printing a font sample list
To print samples of the fonts currently available for your printer:
1Make sure the printer is on and Ready appears.
2From the control panel, press .
3Press  repeatedly until Reports appears, and then press .
4Press  repeatedly until Print Fonts appears, and then press .
5Press  repeatedly until  appears next to PCL Fonts, PostScript Fonts, or PPDS Fonts, and then
press 
.
After the font sample list prints, Ready appears.
Printing a directory list
A directory list shows the...

Canceling a print job
There are several methods for canceling a print job. The following sections explain how to cancel a print job from the
control panel or from a computer (depending on the operating system).
Canceling a print job from the control panel
If the job is formatting or already printing, and Cancel a job appears on the first line of the display:
1Press  until Cancel appears.
A list of jobs appears.
2Press  until  appears next to the job you want to cancel, and then press .
Canceling...

3Click the trash icon.
Canceling a print job from Mac OS X
1Choose Applications > Utilities, and then double‑click Print Center or Printer Setup Utility.
2Double‑click the printer you are printing to.
3From the printer window, select the job to cancel.
4From the icon bar at the top of the window, click the Delete icon.
Printing in black and white
To print all text and graphics using only the black toner cartridge, set the printer to Black Only.
Note: The printer driver is capable of overriding this...

Clearing jams
Avoiding jams
The following hints can help you avoid jams:
Use only recommended paper or specialty media.
For more information, see the Card Stock & Label Guide available on the Lexmark Web site at
www.lexmark.com/publications.
Do not load too much paper. Make sure the stack height does not exceed the indicated maximum height.
Do not load wrinkled, creased, damp, or curled paper.
Flex, fan, and straighten paper before loading it.
Do not use paper that has been cut or trimmed by hand.
Do not...

Jam numbersArea nameInstructions
1200–203 Door A Open Door A, and then remove the jam.
2230–231 Door B Open Doors A and B, and then remove any jams.
3241 Door C Open Door C, and then remove the jam.
Open Tray 1, and then remove the jam.
4242–244 Door D Open Door D, and then remove the jam.
Open Trays 2–4, and then remove any jams.
5250 Multipurpose feeder
1Remove all paper from the multipurpose feeder.
2Flex and stack the paper.
3Reload the multipurpose feeder.
4Adjust the paper guides.
6280–282 Cover F...

200–203 paper jams
1Open Door A by lifting the release latch and lowering the door.
CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching.
2Lift the green lever, and then pull the paper up and toward you.
Note: Make sure all paper fragments are removed.
3Push the green lever down.
4Close Door A.
5Press .
230–231 paper jams
1Open Door A by lifting the release latch and lowering the door.
CAUTION—HOT...

2Lift the green lever, and then pull the paper up and toward you.
Note: Make sure all paper fragments are removed.
3Push the green lever down.
4Close Door A.
5Pull the multipurpose feeder down, and then open Door B.
Clearing jams59
Downloaded From ManualsPrinter.com Manuals 

6Remove the jammed paper.
7Close Door B.
8Press .
241 paper jam
1Open Door C.
2Pull the paper down and toward you.
Note: Make sure all paper fragments are removed.
3Close Door C. Clearing jams60
Downloaded From ManualsPrinter.com Manuals