Lexmark C920n User Manual

							200 Paper Jam  Pages Jammed (Check Areas A-F, T1-5, MPF)
111
Clearing jams
5Remove jam from the duplex unit inlet.
6Slide the duplex unit in.
Downloaded From ManualsPrinter.com Manuals 
						

							200 Paper Jam  Pages Jammed (Check Areas A-F, T1-5, MPF)
112
Clearing jams
7Align the thumbscrews on the duplex unit with the holes in the printer.
8Tighten the thumbscrews to secure the duplex unit.
9Close the duplex unit door.
10Press .
Downloaded From ManualsPrinter.com Manuals 
						

							200 Paper Jam  Pages Jammed (Check Areas A-F, T1-5, MPF)
113
Clearing jams
CheckAreaE
This message indicates a jam in the top, middle, or bottom optional drawer paper path area.
Note:If you have a high capacity feeder, pull the feeder away from the printer.
1Open the jam access door on the top optional drawer.
2Remove the jam.
3Close the jam access door.
4Repeat these steps for jams in the middle and bottom drawers.
5Press  . If the paper jam message continues, check and clear all paper from the paper path.
Downloaded From ManualsPrinter.com Manuals 
						

							200 Paper Jam  Pages Jammed (Check Areas A-F, T1-5, MPF)
114
Clearing jams
CheckAreaF
1Pull the high capacity feeder away from the printer.
2Open the jam access door on the top optional drawer.
Downloaded From ManualsPrinter.com Manuals 
						

							200 Paper Jam  Pages Jammed (Check Areas A-F, T1-5, MPF)
115
Clearing jams
3Remove any jams.
4Close the jam access door.
5Slide the high capacity feeder until the feeder locks to the docking frame.
When the feeder is in the correct position, you hear a click.
6Press .
If the paper jam message continues, check and clear all paper from the paper path.
Downloaded From ManualsPrinter.com Manuals 
						

							200 Paper Jam  Pages Jammed (Check Areas A-F, T1-5, MPF)
116
Clearing jams
Check Area G
This message indicates a jam in the input area of the finisher. To clear area G:
1Open the finisher top cover and remove any jams.
2Close the top cover.
3Press .
Check Area H
This message indicates a paper jam inside the finisher. You need to check both the upper access area and accumulator 
area. To clear area H:
1Push the latch in and hold it.
2Roll the finisher away from the printer.
3Release the latch.
Latch
Downloaded From ManualsPrinter.com Manuals 
						

							200 Paper Jam  Pages Jammed (Check Areas A-F, T1-5, MPF)
117
Clearing jams
4Remove any jams from the finisher entry guide.
Upper access area
1Lift the finisher entry guide handle.
2Lift the hole punch box, rotate the bottom outward and then remove it.
3Release the handle.
Entry guide
Handle
Downloaded From ManualsPrinter.com Manuals 
						

							200 Paper Jam  Pages Jammed (Check Areas A-F, T1-5, MPF)
118
Clearing jams
4Lift the jam access cover.
5Remove any jams from the finisher.
Rotate the knob to move the paper into the access cover area.
6Release the jam access cover.
Jam access cover
Knob
Downloaded From ManualsPrinter.com Manuals 
						

							200 Paper Jam  Pages Jammed (Check Areas A-F, T1-5, MPF)
119
Clearing jams
7Lift the finisher entry guide handle.
8Place the top of the box in the finisher, and then rotate the bottom of the box into the finisher.
9Release the handle.
Downloaded From ManualsPrinter.com Manuals 
						

							200 Paper Jam  Pages Jammed (Check Areas A-F, T1-5, MPF)
120
Clearing jams
Accumulator area
1Open the stapler door.
2Remove any jams from the accumulator.
Rotate the accumulator knob counterclockwise to move the paper down.
Accumulator knob
Downloaded From ManualsPrinter.com Manuals