Lexmark C734dw User Manual
Here you can view all the pages of manual Lexmark C734dw User Manual. The Lexmark manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 71
8After selecting your job type, use the keypad to enter your PIN. If you enter an invalid PIN, the Invalid PIN screen appears. To re‑enter the PIN, make sure Try again appears, and then press . To cancel the PIN, press the up or down arrow button until Cancel appears, and then press . 9Press the up or down arrow button until appears next to the job you want to print, and then press . 10Press the up or down arrow button until appears next to the number of copies you want to print, and then press . Note:...
Page 72
3Press the up or down arrow button until appears next to the document you want to print, and then press . Note: Folders found on the flash drive appear as folders. File names are appended by the extension type (for example, .jpg). 4Press to print one copy, or enter the number of copies using the keypad, and then press to initiate the print job. Note: Do not remove the flash drive from the printer until the document has finished printing. If you leave the flash drive in the printer after leaving the...
Page 73
4Press the up or down arrow button until Print Fonts appears, and then press . 5Press the up or down arrow button until appears next to PCL Fonts, PostScript Fonts, or PPDS Fonts, and then press . After the font sample list prints, Ready appears. Printing a directory list A directory list shows the resources stored in flash memory or on the hard disk. 1Make sure the printer is on and Ready appears. 2From the printer control panel, press . 3Press the up or down arrow button until Reports appears, and...
Page 74
Canceling a print job from the computer For Windows users 1Open the printers folder: aClick , or click Start and then click Run. bIn the Start Search or Run box, type control printers. cPress Enter, or click OK. The printers folder opens. 2Double‑click the printer icon. 3Select the job to cancel. 4From the keyboard, press Delete. From the Windows taskbar: When you send a job to print, a small printer icon appears in the right corner of the taskbar. 1Double‑click the printer icon. A list of print jobs...
Page 75
Printing in black and white To print all text and graphics using only the black toner cartridge, set the printer to Black Only. Note: The printer driver is capable of overriding this setting. 1From the printer control panel, press . 2Press the up or down arrow button until Settings appears, and then press . 3Press the up or down arrow button until Quality Menu appears, and then press . 4Press the up or down arrow button until Print Mode appears, and then press . 5Press the up or down arrow button until...
Page 76
Understanding printer menus Menus list Supplies Paper Menu Reports Settings Replace Supply Cyan Cartridge Magenta Cartridge Yellow Cartridge Black Cartridge Cyan Photoconductor Magenta Photoconductor Yellow Photoconductor Black Photoconductor Waste Toner Box Fuser Transfer ModuleDefault Source Paper Size/Type Configure MP Substitute Size Paper Texture Paper Weight Paper Loading Custom Types Universal SetupMenu Settings Page Device Statistics Network Setup Page Network Setup Page Profiles List NetWare...
Page 77
Supplies menu Supplies menu Menu itemDescription Replace Supply All Cyan Photoconductor Magenta Photoconductor Yellow Photoconductor Black PhotoconductorProvides the option to reset the supply counter for the photoconductor just replaced, or for all photoconductors Select the photoconductor, and then select Yes or No: Select Yes to reset the supply counter. Select No to exit. Note: A supply counter must be reset manually after a photoconductor is replaced. Cyan, Magenta, Yellow, or Black Cartridge Early...
Page 78
Paper menu Default Source menu Menu itemDescription Default Source Tray MP Feeder Manual Paper Manual EnvSets a default paper source for all print jobs Notes: From the Paper menu, Configure MP must be set to Cassette for MP Feeder to appear as a menu setting. Tray 1 (standard tray) is the factory default setting. If the same size and type of paper are in two trays and the Paper Size and Paper Type settings match, then the trays are automatically linked. When one tray is empty, the job prints using the...
Page 79
Menu itemDescription Tray Type Plain Paper Card Stock Transparency Glossy Heavy Glossy Labels Vinyl Labels Bond Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Recycled Custom Type Specifies the type of paper loaded in each tray Notes: Plain Paper is the factory default setting for Tray 1. Custom Type is the factory default setting for all other trays. If available, a user‑defined name will appear instead of Custom Type . Use this menu item to configure automatic tray linking....