Lexmark C734dw User Manual

1Unpack the optional tray, and remove all packing material.
2Place the tray in the location chosen for the printer.
Note: If you are installing more than one optional tray, the 2,000‑sheet tray must always be installed first
(configuring from the bottom up).
Warning—Potential Damage: The optional 550-sheet tray and the optional 550-sheet specialty media drawer
are not interchangeable.
1
2
3
1Optional 550‑sheet specialty media drawer
2Optional 550‑sheet tray
3Optional 2,000‑sheet tray
Note: Optional trays...

3Align the printer with the tray, and then lower the printer into place.
4Label the trays and drawers with the supplied number labels from the top down.
Note: The standard 550-sheet tray (Tray 1) must be labeled as the first tray.
Attaching cables
CAUTION—POTENTIAL INJURY: Do not use the fax feature during a lightning storm. Do not set up this product
or make any electrical or cabling connections, such as the fax feature, power cord, or telephone, during a
lightning storm.
Connect the printer to the...

1
2
1USB port
Warning—Potential Damage: Do not touch the USB cable, any network adapter, or the printer in the area shown
while actively printing. A loss of data or a malfunction can occur.
2Ethernet port
Verifying printer setup
Printing a menu settings page
Print a menu settings page to review the current menu settings and to verify if the printer options are installed correctly.
Note: If you have not made any menu item settings changes yet, then the menu settings page lists all the factory
default...

Printing a network setup page
If the printer is attached to a network, then print a network setup page to verify the network connection. This page
also provides important information that aids network printing configuration.
1Make sure the printer is on and Ready appears.
2From the printer control panel, press .
3Press the up or down arrow button until Reports appears, and then press .
4Press the up or down arrow button until Network Setup Page appears, and then press .
Note: If an optional internal...

Updating available options in the printer driver
Once the printer software and any options are installed, it may be necessary to manually add the options in the printer
driver to make them available for print jobs.
For Windows users
1Open the Printers folder:
aClick , or click Start and then click Run.
bIn the Start Search or Run box, type control printers.
cPress Enter, or click OK.
The printer folder opens.
2Select the printer.
3Right‑click the printer, and then select Properties.
4Click the Install...

Setting up wireless printing
Note: A Service Set Identifier (SSID) is a name assigned to a wireless network. Wireless Encryption Protocol (WEP)
and Wi-Fi Protected Access (WPA) are types of security used on a network.
Information you will need to set up the printer on a wireless network
Note: Do not connect the installation or network cables until prompted to do so by the setup software.
SSID—The SSID is also referred to as the network name.
Wireless Mode (or Network Mode)—The mode will be either...

1
2
 Make sure the printer and computer are fully on and ready.
 Do not connect the USB cable until instructed to do so on the screen.
2Insert the Software and Documentation CD.
3Click Install Printer and Software.
4Click Agree to agree to the License Agreement.
5Click Suggested, and then click Next.
6Click Wireless Network Attach. Additional printer setup37
Downloaded From ManualsPrinter.com Manuals 

7Temporarily connect a USB cable between the computer on the wireless network and the printer.
Note: After the printer is configured, the software will instruct you to disconnect the temporary USB cable so
you can print wirelessly.
8Follow the instructions on the computer screen to complete the software installation.
Note: Basic is the recommended path to choose. Choose Advanced only if you want to customize your
installation.
9To allow other computers on the wireless network to use the wireless printer,...

In Mac OS X version 10.5 or later
aFrom the Apple menu, choose System Preferences.
bClick Network.
cClick AirPort.
In Mac OS X version 10.4 and earlier
aFrom the Finder desktop, choose Go > Applications.
bFrom the Applications folder, double‑click Internet Connect.
cFrom the toolbar, click AirPort.
2From the Network pop‑up menu, select print server xxxxxx, where the x’s are the last six digits of the MAC address
located on the MAC address sheet.
3Open the Safari browser.
4From the Bookmarks drop-down...

Configure your computer to use the printer wirelessly
To print to a network printer, each Macintosh user must install a custom PostScript Printer Description (PPD) file and
create a printer in the Printer Setup Utility or Print Center.
1Install a PPD file on the computer:
aInsert the Software and Documentation CD in the CD or DVD drive.
bDouble-click the installer package for the printer.
cFrom the Welcome screen, click Continue.
dClick Continue again after viewing the Readme file.
eClick Continue after...