Lexmark C734dn User Manual

If you see Ready on the printer display after you have replaced a photoconductor, continue with steps 1–7:
1To specify the replaced photoconductor, press .
Supplies Menu appears.
2Press .
Replace Supply appears.
3Press .
4Press the up or down arrow button until All, Cyan photoconductor, Magenta
photoconductor, 
Yellow photoconductor, or Black photoconductor appears, depending on
the photoconductor you just replaced.
5Press .
 photoconductor replaced appears.
Yes appears.
6Press .
7Press  until Ready...

4Peel the seal from the side of the full waste toner box as shown, and then place it over the hole to seal off the waste
toner box.
12
5Place the sealed waste toner box in the recycling bag.
6Place the bag into the shipping box you just removed the replacement part from.
1
2
7Peel the recycling label off, and place it on the shipping box.
12
8Insert the new waste toner box into the printer.
1
2
Maintaining the printer142
Downloaded From ManualsPrinter.com Manuals 

Moving the printer
Before moving the printer
CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more
trained personnel to lift it safely.
CAUTION—POTENTIAL INJURY: Before moving the printer, follow these guidelines to avoid personal injury or
printer damage:
Turn the printer off using the power switch, and then unplug the power cord from the wall outlet.
Disconnect all cords and cables from the printer before moving it.
Lift the printer off the optional drawer,...

1
2
3 45
1 152.4 mm (6.0 in.)
2 101.6 mm (4.0 in.)
3 609.6 mm (24.0 in.)
4 152.4 mm (6.0 in.)
5 304.8 mm (12.0 in.)
Shipping the printer
When shipping the printer, use the original packaging or call the place of purchase for a relocation kit. Maintaining the printer144
Downloaded From ManualsPrinter.com Manuals 

Administrative support
Finding advanced networking and administrator information
For more advanced system support tasks, see the Networking Guide on the Software and Documentation CD and the
Embedded Web Server Administrators Guide on the Lexmark Web site at http://support.lexmark.com.
Using the Embedded Web Server
1Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then you can:
View the IP address on the printer control panel...

Setting up e‑mail alerts
You can have the printer send you an e‑mail when the supplies are getting low or when the paper needs to be changed,
added, or unjammed.
1Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then you can:
View the IP address on the printer control panel in the TCP/IP section under the Networks/Ports menu.
Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP...

Copying printer settings to other printers
Using the Embedded Web Server, you can copy printer settings to up to 15 other network printers.
1Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then you can:
View the IP address on the printer control panel in the TCP/IP section under the Networks/Ports menu.
Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section.
2Click Copy Printer...