Lexmark C534dn User Manual

Note: Store the color supplies in a clean, cool, dark, dry place where the photoconductors will not be touched or
scratched.
Configuring the printer for black-only printing
1Turn the printer off.
2From the control panel, hold down  and  while turning the printer on.
3Release the buttons when the clock appears, and wait for CONFIG MENU to appear.
4Press  until Color Lock Out appears, and then press .
5Press  until On appears, and then press .
Submitting Selection appears.
6Press  until Exit Config Menu...

2Open the upper door fully. Grasp the inner door handle and pull to open both the inner and lower doors. Now
the photoconductors can be seen.
1
2
3Lift the photoconductor release knob, and then pull the photoconductor out by the handle. Remove all three color
photoconductors.
4Wrap each photoconductor in its original packaging or in a sheet of paper. Tape the packaging to secure it, but
do not let the tape touch the shiny photoconductor drums.
12
5Place the photoconductors in their original box, or in...

6Close the box to protect the photoconductors from light.
7Lift the small toner cartridge handles slightly and pull straight out. Remove all three color toner cartridges.
8Place the toner cartridges in a clean, sturdy box.
9Close the lower door.
Printing
53
Downloaded From ManualsPrinter.com Manuals 

10Close the upper door.
Configuring the printer for color printing and replacing the color supplies
To return to color printing, complete the following steps:
1Turn the printer off.
2From the control panel, hold down  and  while turning the printer on.
3Release the buttons when the clock appears, and wait for CONFIG MENU to appear.
Locate the color residue on the clear end of each photoconductor.
Match the residue to the color label on the transfer belt.
4Press  until Color Lock Out appears, and then...

5Press  until Off appears, and then press .
Submitting Selection appears.
6Press  until Exit Config Menu appears, and then press .
If supplies were not installed, you may see any of the following messages:
84 Cyan PC Unit missing
31 Missing or defective Cyan cartridge
84 Magenta PC Unit missing31 Missing or defective Magenta cartridge
84 Yellow PC Unit missing31 Missing or defective Yellow cartridge
Canceling a print job
There are several methods for canceling a print job. The following sections explain...

Canceling a print job from Mac OS 9.x
When you send a job to print, the printer icon for your selected printer appears on the desktop.
1Double-click the printer icon.
A list of print jobs appears in the printer window.
2Choose a job to cancel.
3Click the trash icon.
Canceling a print job from Mac OS X
1Choose Applications ΠUtilities, and then double-click Print Center or Printer Setup Utility.
2Double-click the printer you are printing to.
3From the printer window, select the job to cancel.
4From the...

Clearing jams
Avoiding jams
The following hints can help you avoid jams:
Use only recommended media.
For more information, see the Card Stock & Label Guide available on the Lexmark Web site at
www.lexmark.com/publications.
For detailed information about purchasing large quantities of customized media, see the Card Stock & Label
Guide.
Do not load too much media. Make sure the stack height does not exceed the indicated maximum height.
Do not load wrinkled, creased, damp, or curled media.
Flex, fan, and...

203
203
230
250
200
242 241200201 202
Accessing jam areas
Open doors and covers, and remove trays to access jam areas. The illustration shows the possible jam areas.
1
2
3
4
5
6 7
1Upper door
2Fuser cover
3Inner door
4Lower door
5Standard tray (Tray 1)
Clearing jams
58
Downloaded From ManualsPrinter.com Manuals 

6Optional 550-sheet tray (Tray 2)
7Exit bin
Use the following table to locate instructions for a particular jam.
Note: To resolve any message, all media must be cleared from the entire media path.
Control panel messageArea descriptionSee
200.xx Paper JamJam at the input sensor“Clearing jams just beyond Tray 1” on
page 60
“Clearing Tray 2 jams” on page 61
“Clearing jams behind the inner door” on
page 62
“Jams under the photoconductors” on
page 62
200.xx Paper JamJam in the manual feed slot“Clearing jams...

Clearing jams just beyond Tray 1
If the paper did not feed from Tray 1 correctly, the jam is in the tray. 241.xx Paper Jam appears.
1Open Tray 1.
2Remove the jam.
3Reinsert the tray.
If the paper fed from Tray 1 and jammed just beyond the tray, 200.xx Paper Jam appears.
1Open Tray 1.
2Remove the jam.
3Reinsert the tray.
Clearing jams
60
Downloaded From ManualsPrinter.com Manuals