Lexmark C534dn User Manual

In the U.S. or Canada, call (1-800-539-6275). For other countries/regions, visit the Lexmark Web site at
www.lexmark.com.
Troubleshooting
101
Downloaded From ManualsPrinter.com Manuals 

Notices
Product nameMachine typeModel number
Lexmark C530dn5022-130C530dn
Lexmark C532n5022-310C532n
Lexmark C532dn5022-330C532dn
Lexmark C534n5022-510C534n
Lexmark C534dn5022-530C534dn
Edition notice
July 2006
The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK
INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF...

Warning: A Warning identifies something that could damage your product hardware or software.
Warning: This type of Warning indicates that you should not touch the marked area.
CAUTION: A CAUTION identifies something that could cause you harm.
CAUTION: This type of CAUTION indicates a hot surface.
CAUTION: This type of CAUTION indicates a shock hazard.
CAUTION: This type of CAUTION indicates a tipping hazard.
Federal Communications Commission (FCC) compliance information
statement
This product has been...

This product satisfies the Class B limits of EN 55022 and safety requirements of EN 60950.
Japanese VCCI notice
Noise emission levels
The following measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296.
Note: Some modes may not apply to your product.
1-meter average sound pressure, dBA
Printing53 dBA
ScanningN/A
CopyingN/A
Ready32 dBA
Values are subject to change. See www.lexmark.com for current values.
Waste from Electrical and Electronic Equipment (WEEE)...

Class I laser products are not considered to be hazardous. The printer contains internally a Class IIIb (3b) laser that is nominally a 5
milliwatt gallium arsenide laser operating in the wavelength of 770-795 nanometers. The laser system and printer are designed so there
is never any human access to laser radiation above a Class I level during normal operation, user maintenance, or prescribed service
condition.
Laser advisory label
A laser notice label may be affixed to this printer as shown:
Power...

Total energy usage
It is sometimes helpful to calculate the total product energy usage. Since power consumption claims are provided in power units of Watts,
the power consumption should be multiplied by the time the product spends in each mode in order to calculate energy usage. The total
product energy usage is the sum of each modes energy usage.
Statement of Limited Warranty
Lexmark C530dn
Lexmark C532n
Lexmark C532dn
Lexmark C534n
Lexmark International, Inc., Lexington, KY
This limited warranty...

—Modification or unauthorized attachments
—Accidents, misuse, abuse or use inconsistent with Lexmark user’s guides, manuals, instructions or guidance
—Unsuitable physical or operating environment
—Maintenance by anyone other than Lexmark or a Lexmark authorized servicer
—Operation of a product beyond the limit of its duty cycle
—Use of printing media outside of Lexmark specifications
—Refurbishment, repair, refilling or remanufacture by a third party of products, supplies or parts
—Products, supplies,...

Index
Numerics
550-sheet drawer 
installing  14
802.1x authentication  80
A
aligning 
toner cartridges  69
attaching cables  26
B
black-only printing  51
brightness, adjusting  75
buttons, control panel 
Back  11
Menu  11
navigation  11
numeric keypad  11
Select  11
Stop  11
C
cables, attaching 
Ethernet  26
USB  26
calling Customer Support  100
canceling a job 
from Mac OS 9.x  56
from Mac OSX  56
from the control panel  55
from Windows desktop  55
from Windows taskbar  55
card stock 
guidelines  40...

unacceptable  38
memory card 
installing  18
menu settings page, printing  48
menus, diagram of  12
moving the printer  73, 74
multipurpose feeder 
loading  30
using  32
N
network setup page  49
noise emission levels  104
notices  102, 103, 104, 105, 106
O
options 
550-sheet drawer  14
firmware card  21
firmware cards  15
flash memory card  21
hard disk  22
internal  15
internal print server  24
memory card  18
memory cards  15
port interface card  24
ordering 
fuser  73
photoconductors  73
toner...

standard exit bin 
attaching  34
using  34
standard tray 
loading  27
status of supplies, checking  69
storing 
media  41
paper  41
supplies  69
supplies 
conserving  69
removing photoconductor  51
removing toner cartridges  51
status of  69
storing  69
supplies, ordering 
fuser  73
photoconductors  73
toner cartridges  71
transfer belt  72
waste toner box  73
system board 
accessing  15
reinstalling access cover  25
T
toner cartridges 
aligning  69
ordering  71
removing  51
transfer belt 
ordering  72...