Lexmark C 950 Service Manual

Repair information 4-7
  5058-030
Go Back Previous
Next
MPF top cover removal
1.Remove the left rear lower cover. See “Left rear lower cover removal” on page 4-6.
2.Remove the MPF tray feeder. See “MPF tray feeder removal” on page 4-125. (Optional.)
3.Gently detach the MPF top cover from the MPF tray assembly.
4.Remove the MPF top cover. 

4-8  Service Manual 5058-030  
Go Back Previous
Next
Operator panel front cover (SFP)
1.Open the printer front door. 
2.Remove the two screws (A) securing the plastic cover to the machine.
3.Slightly lift the operator panel front cover, and remove it from the machine.
Operator panel top cover (SFP) removal
1.Remove the operator panel front cover. See “Operator panel front cover (SFP)” on page 4-8.
2.Remove the operator panel. See “Operator panel assembly (SFP) removal” on page 4-126.
3.Remove the...

Repair information 4-9
  5058-030
Go Back Previous
Next
4.Remove the touch screen. See “Operator panel PCBA (SFP) removal” on page 4-127.
5.Remove the operator panel top cover. 

4-10  Service Manual 5058-030  
Go Back Previous
Next
Printer front door removal
1.Open the printer front door, and position it to an angle approximately 45 degrees from the printer.
2.Disengage the two links (A) connecting the printer front door to the printer.
A 

Repair information 4-11
  5058-030
Go Back Previous
Next
3.Lower the printer front door to its lowest position, slightly flex the printer front door by pushing down on the 
middle portion, and then pull to the right to disengage.
4.Remove the printer front door.
Printer right cover removal
1.Open the printer front door.
2.Remove media tray 1.
3.Remove the rear upper cover. See “Rear upper cover removal” on page 4-16.
4.Remove the rear lower cover. See “Rear lower cover removal” on page 4-14. 

4-12  Service Manual 5058-030  
Go Back Previous
Next
5.Remove the two screws (A) from the printer right cover.
6.Remove the printer right cover.
Printer top cover removal
1.Open the printer front door.
2.Remove the operator panel front cover. 
A 

Repair information 4-13
  5058-030
Go Back Previous
Next
3.Remove the two screws (A) from the printer top cover.
4.Remove the printer top cover.
A 

4-14  Service Manual 5058-030  
Go Back Previous
Next
Rear lower cover removal
1.Remove the rear upper cover. See “Rear upper cover removal” on page 4-16.
2.Remove the input tray interface cover.
3.Disconnect all the cables connected from input trays and options.
4.Remove the three screws (A) from the rear lower cover.
A 

Repair information 4-15
  5058-030
Go Back Previous
Next
5.Remove the rear lower cover. 

4-16  Service Manual 5058-030  
Go Back Previous
Next
Rear upper cover removal
1.Remove the two screws (A) from the rear upper cover.
2.Remove the rear upper cover.
A