Lenovo Ideatab S6000h Manual

Lenovo IdeaTab S6000
27 1010 Back cover
Figure 1. Removal steps of back cover
Use a thin flat blade to carefully pry off the two speaker covers.
Remove screws  .
StepScrew (quantity)ColorTorque
M1.6 × 0.35 × 2.5mm, Phillips-flat head  
Zine-Plated (2)Black 0.8 ± 0.05 kgf.cm
a
aa
a 

Lenovo IdeaTab S6000 Hardware Maintenance Manual
28
Figure 1. Removal steps of back cover (continued)
Insert the thin flat blade between the frame join near the power button, then 
carefully move the blade along the join to remove the back cover. 

Lenovo IdeaTab S6000
29 1020 Battery pack
For access, remove this FRU:
 “1010 Back cover” on page 27
Figure 2. Removal steps of battery pack
Hold the tab and lift the battery slightly. Insert a flat blade under the right side 
of the battery and pry the battery out. Disconnect the battery connector  . 
Detach the battery from the bracket, as shown below.
DANGER
Only use the battery specified in the parts list for your computer. Any other 
battery could ignite or explode.
a
a 

Lenovo IdeaTab S6000 Hardware Maintenance Manual
301030 SIM card and SD card
Figure 3. Removal steps of SIM card and SD card
Remove SIM card and SD card from the card slot in the direction shown by 
arrows  and .
abcd
SIM CardSD Card
a
b
c
d 

Lenovo IdeaTab S6000
31 1040 System board
For access, remove these FRUs in order:
 “1010 Back cover” on page 27
 “1020 Battery pack” on page 29
 “1030 SIM card and SD card” on page 30Important notices for handling the system board:
When handling the system board, bear the following in mind.
 Be careful not to drop the system board on a bench top that has a hard 
surface, such as metal, wood, or composite.
 Avoid rough handling of any kind.
 In the whole process, make sure not to drop or stack the system...

Lenovo IdeaTab S6000 Hardware Maintenance Manual
32
Figure 4. Removal steps of system board
Peel off the conductive cloth and insulating film as shown. Detach the back 
camera connector  , sub board connector  , touchpad connector  , LCD 
connector  . Peel off the speakers   and vibrator  . Remove the system 
board.
abcdef
a
b
cd
fe 

Lenovo IdeaTab S6000
33
Figure 4. Removal steps of system board (continued)
Remove six screws  .
StepScrew (quantity)ColorTorque
M1.6 × 0.35 × 2.5mm, Phillips-flat head  
Zine-Plated (6)Black 0.8 ± 0.05kgf.cm
g
gggg
g
g
a 

Lenovo IdeaTab S6000 Hardware Maintenance Manual
341050 Back camera
For access, remove these FRUs in order:
 “1010 Back cover” on page 27
 “1020 Battery pack” on page 29
 “1030 SIM card and SD card” on page 30
Figure 5. Removal steps of back camera
Remove the back camera as shown below. 

Lenovo IdeaTab S6000
35 1060 Sub board
For access, remove these FRUs in order:
 “1010 Back cover” on page 27
 “1020 Battery pack” on page 29
 “1030 SIM card and SD card” on page 30
 “1040 System board” on page 31
Figure 6. Removal steps of  sub board
Remove screws  , detach the connector  , then remove the sub board.
StepScrew (quantity)ColorTorque
M1.6 × 0.35 × 2.5mm, Phillips-flat head  
Zine-Plated (2)Black 0.8 ± 0.05kgf.cm
ab
a
a
b
a 

Lenovo IdeaTab S6000 Hardware Maintenance Manual
36
Front view
Power button
Earphone jack
Microphone
Front camera
Locations
a
b
c
d
dc
b
a