Lenovo Ideapad 310 Touch 15isk User Guide

							Chapter 1. Getting to know your computer
7
Left-side view - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
aAC power adapter 
jackConnects to the AC power adapter.
bBattery/Charging 
stat
us indicator 
AC power  
adapter status Indicator status
Meaning
Disconnected
Off The computer is in sleep mode or 
tu
rned off; The battery has more 
than 20% charge.
Solid amber The battery has between 5% and 
20

% charge.
Fast blinking amber The battery has between 1% and 5% 
char

ge.
Connected
Slow blinking amber The battery is being charged. When 
ba
ttery charge reaches 20%, the 
blinking color changes to white.
Slow blinking white The battery has between 20% and 
80

% charge and is still charging. 
When the battery reaches 80% 
charge the light will stop blinking.
Solid white The battery has more than 80% 
ch

arge, charging will continue until 
the battery is fully charged.
c VGA portConnects to external display devices.
dRJ-45 portConnects the computer to an Ethernet network.
eHDMI portConnects to devices with HDMI input such as a TV or a 
display.
abcdefghi 
						

							Chapter 1. Getting to know your computer
8
fUSB 3.0 portConnects to USB devices.
Note: For details, see “Connecting USB devices”  on page 10.
gCombo audio 
jac
kConnects to headsets.
Notes:
 The combo audio jack does not support conventional microphones.
T
he recording function may not be supported if third-party headphones or headsets are 
connected, due to different industry standards.
h Novo buttonWhen the computer is off, press this button to start the 
Lenovo OneKey Recovery system or the BIOS setup utility, 
or to enter the boot menu.
i Memory card slotInsert memory cards (not supplied) here.
Note: For details, see “Using memory cards (not supplied)”  on page 11. 
						

							Chapter 1. Getting to know your computer
9
„
Connecting netw
 ork cables
To insert a network cable, do the following:
1Hold one connector of the network ca ble to pr
 ess the RJ-45 cover down 
gently  a.
2 Insert the connector into the RJ-45 port 
b.
„ Software configuration
Consult your Internet Service Provider (ISP) for details on how to configure 
your computer.
a
ab
a 
						

							Chapter 1. Getting to know your computer
10 „Connecting USB 
 devices
You can connect a USB device to your computer by inserting its USB plug 
(Type A) into the USB port on your computer.
The first time you plug a USB device  into a
  particular USB port on your 
computer, Windows automatically installs a driver for that device. After the 
driver has been installed, you can disconnect and reconnect the device 
without performing any additional steps. 
Before disconnecting a USB storage device, make sure your computer has 
fin i

shed transferring data to that device. Click the  Safely Remove Hardware 
and Eject Media  icon in the Windows notification area to remove the device 
before disconnecting. 
Note: Typically, Windows detects a new device after it has been connected, and then installs 
the driver automatically. However, some devices may require you to install the driver 
before connecting. Check the documentation provided by the device’s manufacturer 
before connecting the device.
Note:If your USB device uses a power cord, connect the device to a power source before 
connecting it. Otherwise, the device may not be recognized. 
						

							Chapter 1. Getting to know your computer
11
„
Using memo
 ry cards (not supplied) 
Your computer supports the following types of memory cards:
 Secure Digital (SD) card
 Secure Digital High  Capacity (SDHC) card

 SD eXtended Capacity (SDXC) card
 MultiMediaCard (MMC)
Inserting a memory card
Insert the memory card until it touches the bottom of the slot.
Removing a memory card
Gently pull the memory card out of the memory card slot.
Notes:
 Insert  on ly one card in the slot at a time.
 This card reader does not support SDIO devices (e.g., SDIO Bluetooth, etc.).
Note: Before removing the memory card, disable it by using the Windows safely remove 
hardware and eject media utility to avoid data corruption. 
						

							Chapter 1. Getting to know your computer
12
Right-side view  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
aPower status indicator 
Indicator Indicator status Meaning
Power sta tus 
indic a

torOn (solid white) The computer is powered on.
Blinking The computer is in sleep mode.
Off The computer is powered off.
bUSB portConnects to USB devices.
Note: For details, see “Connecting USB devices”  on page 10.
cOptical disc driveReads/Burns optical discs.
Note: Some models are supplied with a dummy optical disc drive.
dKensington slotAttach a security lock (not supplied) here to help protect 
your computer from theft and unauthorized use.
You can attach a security lock  to yo
 ur computer to help 
prevent it from being removed without your permission.
For details on installing the security lock, please refer to the 
in st

ructions shipped with the security lock that you have 
purchased.
abcd 
						

							Chapter 1. Getting to know your computer
13
Bottom view - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
„ideapad 310-14ISK
a
c
ba 
						

							Chapter 1. Getting to know your computer
14 „ideapad 310-15ISK/ideapad 310 Touch-15ISK
a Ventilation slotsDissipate internal heat.
Note: Make sure that none of the ventilation slots are blocked, or else overheating of the 
computer may occur.
bBottom slot coverThe hard disk drive, memory module, and mini-PCI 
Express Card are placed underneath.
cSpeakersProvide audio output.
ba
a
c 
						

							15
Chapter 2. Starting to use Windows 10
Configuring the operating system for the  
first time   - - 
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
You may need to configure the operating system when it is first used. The 
configuration process may include the procedures below:
 Accepting the end user license agreement
 Configuring the Internet connection
 Registering the operating system
 Creating a user account
Operating system interfaces  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
The return of the Start menu
If you click the Start button in the lower-left corner, the Start menu is 
displayed.
To open the start menu, do one of the following:
 Select the Start button in the lower-left corner, the Start menu is displayed.
 Press the Windows key  on the keyboard. 
						

							Chapter 2. Starting to use Windows 10
16
The power button is on the Start menu, select it you can choose to shut down 
or restart the computer, or put the computer into sleep mode.
Through the Start menu, you can locate all the in
 stalled apps or view the 
frequently used apps.
The ACTION CENTER
Select the ACTION CENTER icon   on the taskbar and the ACTION 
CENTER is displayed.
From the ACTION CENTER, you can examine important notifications from 
W i

ndows and your apps. Moreover, you can change common settings 
quickly.