Lenovo Ideapad 300s 14isk Ideapad 500s 14isk User Guide

Chapter 1. Getting to know your computer
7
„Connecting USB devices
You can connect a USB device to your computer by inserting its USB plug 
(Type A) into the USB port on your computer.
The first time you plug a USB device into a particular USB port on your 
computer, Windows automatically installs a driver for that device. After the 
driver has been installed, you can disconnect and reconnect the device 
without performing any additional steps. 
Before disconnecting a USB storage device, make sure your...

Chapter 1. Getting to know your computer
8
„Using memory cards (not supplied) 
Your computer supports the following types of memory cards:
 Secure Digital (SD) card
 Secure Digital High Capacity (SDHC) card
 SD eXtended Capacity (SDXC) card
 MultiMediaCard (MMC)
Inserting a memory card
Insert the memory card until it touches the bottom of the slot.
Removing a memory card
Gently pull the memory card out of the memory card slot.
Notes:Insert only one card in the slot at a time.This card reader does not...

Chapter 1. Getting to know your computer
9
Right-side view  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
aNovo buttonWhen the computer is off, press this button to start the 
Lenovo OneKey Recovery system or the BIOS setup utility, 
or to enter the boot menu.
bUSB 3.0 portConnects to USB devices.
Note:For details, see “Connecting USB devices” on page 7.
cUSB 3.0 portConnects to USB...

Chapter 1. Getting to know your computer
10
Bottom view  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
aVentilation slotsAllow air to enter the computer for cooling.
bSpeakersProvide audio output.
b
a 

11
Chapter 2. Starting to use Windows 10
Configuring the operating system for the  
first time  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
You may need to configure the operating system when it is first used. The 
configuration process may include the procedures below:
 Accepting the end user license agreement
 Configuring the Internet connection...

Chapter 2. Starting to use Windows 10
12
The ACTION CENTER
Select the ACTION CENTER icon  on the taskbar and the ACTION 
CENTER is displayed.
From the ACTION CENTER, you can examine important notifications from 
Windows and your apps. Moreover, you can change common settings 
quickly.
Task view in taskbar
In Windows 10, you can add a new desktop and switch between different 
desktops.
To add a new desktop, do the following:
 Click the task view icon  in the taskbar area. 

Chapter 2. Starting to use Windows 10
13
New desktop.
To switch between desktops, click the task view icon , then select your 
desired desktop. 

Chapter 2. Starting to use Windows 10
14
Putting the computer to sleep or shutting  
it down - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
When you have finished working with your computer, you can put it to sleep 
or shut it down.
„Putting your computer to sleep
If you will be away from your computer for only a short time, put the 
computer to...

Chapter 2. Starting to use Windows 10
15
„Shutting down the computer
If you are not going to use your computer for a long time, shut it down.
To shut down your computer, do one of the following:
 Move the cursor to the lower-left corner, and then select the Start button. 
Select Power 
 → Shut down.
 Right-click the Start button in the lower-left corner and select Shut down or 
sign out → Shut down. 

Chapter 2. Starting to use Windows 10
16
Connecting to a wireless network - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
Enabling wireless connection
To enable wireless functions, do one of the following:
 Click the ACTION CENTER icon  in the notification area, and then 
deselect Airplane mode.
 Press  to disable airplane mode.
 Click Settings  → Network & Internet → Airplane mode to open the 
network configuration page. Then toggle the airplane mode switch to Off.
Connecting...