Lenovo B71 80 Laptop User Guide

Chapter 1. Getting to know your computer
7 Connecting USB devices
You can connect a USB device to your computer by inserting its USB plug 
(Type A) into the USB port on your computer.
The first time you plug a USB device into a particular USB port on your 
computer, Windows automatically installs a driver for that device. After the 
driver has been installed, you can disconnect and reconnect the device 
without performing any additional steps. 
Before disconnecting a USB storage device, make sure your...

Chapter 1. Getting to know your computer
8 Using memory cards (not supplied) 
Your computer supports the following types of memory cards:
 Secure Digital (SD) card
 Secure Digital High Capacity (SDHC) card
 SD eXtended Capacity (SDXC) card
 MultiMediaCard (MMC)
Inserting a memory card
Insert the memory card until it touches the bottom of the slot.
Removing a memory card
Gently pull the memory card out of the memory card slot.
Notes:•Insert only one card in the slot at a time.
•This card reader does not...

Chapter 1. Getting to know your computer
9 Connecting network cables
To insert a network cable, do the following:
1Hold one connector of the network cable to press the RJ-45 cover down 
gently a.
2Insert the connector into the RJ-45 port b.
Software configuration
Consult your Internet Service Provider (ISP) for details on how to configure 
your computer.
a
a ba 

Chapter 1. Getting to know your computer
10
Right-side view  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
aCombo audio 
jackConnects to headsets.
Notes:•The combo audio jack does not support conventional microphones.
•The recording function may not be supported if third-party headphones or headsets are 
connected, due to different industry standards.
bUSB 2.0 portConnects to USB...

Chapter 1. Getting to know your computer
11
Front view - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
aSystem status 
indicatorsBattery status indicator 
Power status indicator 
Indicator Indicator status Meaning
Battery 
status 
indicator
On (solid white) The battery has more than 20% charge.
Solid amber The battery has between 5% and 20% 
charge.
Fast blinking...

Chapter 1. Getting to know your computer
12
Bottom view  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
aSpeakersProvide audio output.
bLouversAllow air to enter the computer for cooling.
a
b 

13
Chapter 2. Starting to use Windows
Configuring the operating system for the 
first time  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
You may need to configure the operating system when it is first used. 
The configuration process may include the procedures below:
 Accepting the end user license agreement
 Configuring the Internet connection...

Chapter 2. Starting to use Windows
14
- Right-click the Start button in the lower-left corner and select Shut down 
or sign out   Shut down.
Putting your computer to sleep
If you will be away from your computer for only a short time, put the 
computer to sleep. When the computer is in sleep mode, you can quickly 
wake it to resume use, bypassing the startup process.
To put the computer to sleep, do one of the following:
 Close the display lid.
 Press the Power button.
 Do the proper operations in the...

Chapter 2. Starting to use Windows
15
Connecting to a wireless network   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
Enabling wireless connection
To enable wireless functions, do one of the following:
•Windows 10:  Press F7 ( ) to disable airplane mode.
Connecting to a wireless network
To connect to a wireless network, do the following:
1 Press  F7 ( ) to turn on the wireless feature.
2 View the available wireless networks. Click the wireless network 
connection status icon...

Chapter 2. Starting to use Windows
16
Operating system interface (for the 
Windows 10 operating system) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
Windows 10 comes with a powerful and useful start menu.
To open the start menu, do one of the following:
 Press the Windows key   on the keyboard.
Start   on the lower-left corner of the desktop.
aGet Started appeStart button
bSettings buttonfSearch box
cPower buttongTask view button
dAll apps button
32
4
567
1